#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/PrintHostDialogs.hpp>

Inheritance diagram for Slic3r::GUI::CrealityPrintHostSendDialog:

Collaboration diagram for Slic3r::GUI::CrealityPrintHostSendDialog:

Classes
struct	SlotInfo

Public Member Functions
	CrealityPrintHostSendDialog (const boost::filesystem::path &path, PrintHostPostUploadActions post_actions, const wxArrayString &groups, const wxArrayString &storage_paths, const wxArrayString &storage_names, bool switch_to_device_tab, PrintHost *printhost)
virtual void	init () override
virtual std::map< std::string, std::string >	extendedInfo () const override
boost::filesystem::path	filename () const
PrintHostPostUploadAction	post_action () const
std::string	group () const
std::string	storage () const
bool	switch_to_device_tab () const
virtual void	EndModal (int ret) override
void	show_dsa_button (wxString const &title={})
bool	get_checkbox_state ()
virtual void	on_dpi_changed (const wxRect &suggested_rect)
void	SetButtonLabel (wxWindowID btn_id, const wxString &label, bool set_focus=false)
void	AddButton (wxWindowID btn_id, const wxString &label, bool set_focus=false)
float	scale_factor () const
float	prev_scale_factor () const
void	set_scale_factor (float v)
void	set_prev_scale_factor (float v)
void	set_em_unit (int v)
bool	force_rescale () const
int	em_unit () const
const wxFont &	normal_font () const
void	enable_force_rescale ()
int	ShowModal ()

Protected Types
enum	{ BORDER = 20 , LOGO_SPACING = 25 , LOGO_GAP = 20 , CONTENT_WIDTH = 242 , CONTENT_MAX_HEIGHT = 60 , BTN_SPACING = 20 , VERT_SPACING = 15 }

Protected Member Functions
Button *	add_button (wxWindowID btn_id, bool set_focus=false, const wxString &label=wxString())
Button *	get_button (wxWindowID btn_id)
void	apply_style (long style)
void	finalize ()
virtual void	on_sys_color_changed ()

Protected Attributes
wxTextCtrl *	txt_filename
wxComboBox *	combo_groups
wxComboBox *	combo_storage
PrintHostPostUploadAction	post_upload_action
wxString	m_valid_suffix
wxString	m_preselected_storage
wxArrayString	m_paths
bool	m_switch_to_device_tab
boost::filesystem::path	m_path
PrintHostPostUploadActions	m_post_actions
wxArrayString	m_storage_names
wxFont	boldfont
wxBoxSizer *	content_sizer
wxBoxSizer *	btn_sizer
wxBoxSizer *	m_dsa_sizer
wxStaticBitmap *	logo
MsgButtonsHash	m_buttons
CheckBox *	m_checkbox_dsa {nullptr}
wxString	m_forward_str

Private Member Functions
void	update_em_unit ()
bool	is_new_scale_factor () const
void	rescale (const wxRect &suggested_rect)

Private Attributes
bool	m_enableSelfTest
PrintHost *	m_printhost
std::vector< SlotInfo >	m_printer_slots
std::vector< BitmapComboBox * >	m_slot_combos
float	m_scale_factor
int	m_em_unit
wxFont	m_normal_font
float	m_prev_scale_factor
bool	m_can_rescale
bool	m_force_rescale
int	m_new_font_point_size

Static Private Attributes
static constexpr const char *	CONFIG_KEY_ENABLESELFTEST = "crealityprint_enable_self_test"

Detailed Description

Class Documentation

◆ Slic3r::GUI::CrealityPrintHostSendDialog::SlotInfo

struct Slic3r::GUI::CrealityPrintHostSendDialog::SlotInfo

Collaboration diagram for Slic3r::GUI::CrealityPrintHostSendDialog::SlotInfo:

Class Members
int	box_id
string	color
int	material_id
string	tool_id
string	type

Member Enumeration Documentation

◆ anonymous enum

anonymous enum

protectedinherited

Enumerator
BORDER
LOGO_SPACING
LOGO_GAP
CONTENT_WIDTH
CONTENT_MAX_HEIGHT
BTN_SPACING
VERT_SPACING

       {
    BORDER = 20,
    LOGO_SPACING = 25,
    LOGO_GAP = 20,
    CONTENT_WIDTH = 242,
    CONTENT_MAX_HEIGHT = 60,//TO
    BTN_SPACING = 20,
    VERT_SPACING = 15,//TO
  };

Constructor & Destructor Documentation

◆ CrealityPrintHostSendDialog()

Slic3r::GUI::CrealityPrintHostSendDialog::CrealityPrintHostSendDialog	(	const boost::filesystem::path &	path,
		PrintHostPostUploadActions	post_actions,
		const wxArrayString &	groups,
		const wxArrayString &	storage_paths,
		const wxArrayString &	storage_names,
		bool	switch_to_device_tab,
		PrintHost *	printhost )

    : PrintHostSendDialog(path, post_actions, groups, storage_paths, storage_names, switch_to_device_tab)
    , m_enableSelfTest(false)
    , m_printhost(printhost)
{}

References Slic3r::GUI::PrintHostSendDialog::PrintHostSendDialog(), m_enableSelfTest, m_printhost, and Slic3r::GUI::PrintHostSendDialog::switch_to_device_tab().

Here is the call graph for this function:

Member Function Documentation

◆ add_button()

Button * Slic3r::GUI::MsgDialog::add_button	(	wxWindowID	btn_id,
		bool	set_focus = false,
		const wxString &	label = wxString() )

protectedinherited

{
    Button* btn = new Button(this, label, "", 0, 0, btn_id);
    /* ORCA not required since all buttons has same size and Rescale re applies its style
    ButtonSizeType type;
 
    if (label.length() < 5) {
        type = ButtonSizeNormal;
        btn->SetMinSize(MSG_DIALOG_BUTTON_SIZE); // ?????
    }
    else if (label.length() >= 5 && label.length() < 8) {
        type = ButtonSizeMiddle;
        btn->SetMinSize(MSG_DIALOG_MIDDLE_BUTTON_SIZE);
    } 
    else if (label.length() >= 8 && label.length() < 12) {
        type = ButtonSizeMiddle;
        btn->SetMinSize(MSG_DIALOG_LONG_BUTTON_SIZE);
    } else {
        type = ButtonSizeLong;
        btn->SetMinSize(MSG_DIALOG_LONGER_BUTTON_SIZE);
    }
    */
 
    if (btn_id == wxID_OK || btn_id == wxID_YES || btn_id == wxFORWARD) {
        btn->SetStyle(ButtonStyle::Confirm, ButtonType::Choice);
    }
 
    if (btn_id == wxID_CANCEL || btn_id == wxID_NO) {
        btn->SetStyle(ButtonStyle::Regular, ButtonType::Choice);
    }
 
    if (set_focus)
        btn->SetFocus();
    btn_sizer->Add(btn, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, FromDIP(ButtonProps::ChoiceButtonGap()));
    btn->Bind(wxEVT_BUTTON, [this, btn_id](wxCommandEvent&) { EndModal(btn_id); });
 
    MsgButton *mb = new MsgButton;
    ButtonData *bd = new ButtonData;
 
    bd->button = btn;
    //bd->type   = type;
 
    // m_buttons.size() is a size_t, which does not match the %d conversion
    mb->id        = wxString(std::to_string(m_buttons.size()));
    mb->buttondata = bd;
    m_buttons[ wxString(std::to_string(m_buttons.size()))] = mb;
    return btn;
};

References bd, btn_sizer, Slic3r::GUI::MsgButton::buttondata, Choice, ButtonProps::ChoiceButtonGap(), Confirm, Slic3r::GUI::DPIDialog::EndModal(), Slic3r::GUI::MsgButton::id, m_buttons, Regular, and Button::SetStyle().

Referenced by Slic3r::GUI::ConfigsOverwriteConfirmDialog::ConfigsOverwriteConfirmDialog(), Slic3r::GUI::DownloadDialog::DownloadDialog(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), AddButton(), apply_style(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and Slic3r::GUI::PrintHostSendDialog::init().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ AddButton()

void Slic3r::GUI::MsgDialog::AddButton	(	wxWindowID	btn_id,
		const wxString &	label,
		bool	set_focus = false )

inlineinherited

82{ add_button(btn_id, set_focus, label); }

Slic3r::GUI::MsgDialog::add_button

Button * add_button(wxWindowID btn_id, bool set_focus=false, const wxString &label=wxString())

Definition MsgDialog.cpp:184

References add_button().

Referenced by Slic3r::GUI::PrintOptionsDialog::PrintOptionsDialog(), Slic3r::GUI::wgtDeviceNozzleRackNozzleItem::OnBtnNozzleStatus(), and Slic3r::GUI::wgtDeviceNozzleRackHotendUpdate::OnStatusIconClick().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ apply_style()

void Slic3r::GUI::MsgDialog::apply_style ( long style )

protectedinherited

{
    if (style & wxFORWARD)
        add_button(wxFORWARD, true, _L("Go to") + " " + m_forward_str);
    if (style & wxOK) {
        if (style & wxFORWARD) { add_button(wxID_CANCEL, false, _L("Later")); }
        else {
            add_button(wxID_OK, true, _L("OK"));
        }
    }
    if (style & wxYES)      add_button(wxID_YES, true, _L("Yes"));
    if (style & wxNO)       add_button(wxID_NO, false,_L("No"));
    if (style & wxCANCEL)   add_button(wxID_CANCEL, false, _L("Cancel"));
 
    logo->SetBitmap( create_scaled_bitmap(style & wxAPPLY        ? "completed" :
                                          style & wxICON_WARNING        ? "exclamation" : // ORCA "exclamation" used for dialogs "obj_warning" used for 16x16 areas
                                          style & wxICON_INFORMATION    ? "info"        :
                                          style & wxICON_QUESTION       ? "question"    : "OrcaSlicer", this, 64, style & wxICON_ERROR));
}

References _L, add_button(), create_scaled_bitmap(), logo, m_forward_str, and style.

Referenced by MsgDialog().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ em_unit()

int Slic3r::GUI::DPIAware< wxDialog >::em_unit ( ) const

inlineinherited

203{ return m_em_unit; }

Slic3r::GUI::DPIAware

Definition GUI_Utils.hpp:107

Here is the caller graph for this function:

◆ enable_force_rescale()

void Slic3r::GUI::DPIAware< wxDialog >::enable_force_rescale ( )

inlineinherited

206{ m_force_rescale = true; }

◆ EndModal()

void Slic3r::GUI::PrintHostSendDialog::EndModal ( int ret )

overridevirtualinherited

Reimplemented in Slic3r::GUI::ElegooPrintHostSendDialog, and Slic3r::GUI::FlashforgePrintHostSendDialog.

{
    if (ret == wxID_OK) {
        // Persist path and print settings
        wxString path = txt_filename->GetValue();
        int last_slash = path.Find('/', true);
    if (last_slash == wxNOT_FOUND)
      path.clear();
    else
            path = path.SubString(0, last_slash);
                
    AppConfig *app_config = wxGetApp().app_config;
    app_config->set("recent", CONFIG_KEY_PATH, into_u8(path));
 
        if (combo_groups != nullptr) {
            wxString group = combo_groups->GetValue();
            app_config->set("recent", CONFIG_KEY_GROUP, into_u8(group));
        }
        if (combo_storage != nullptr) {
            wxString storage = combo_storage->GetValue();
            app_config->set("recent", CONFIG_KEY_STORAGE, into_u8(storage));
        }
    }
 
    MsgDialog::EndModal(ret);
}

References combo_groups, combo_storage, Slic3r::GUI::CONFIG_KEY_GROUP, Slic3r::GUI::CONFIG_KEY_PATH, Slic3r::GUI::CONFIG_KEY_STORAGE, Slic3r::GUI::DPIDialog::EndModal(), group(), Slic3r::GUI::into_u8(), Slic3r::AppConfig::set(), storage(), and txt_filename.

Referenced by Slic3r::GUI::ElegooPrintHostSendDialog::EndModal(), and Slic3r::GUI::FlashforgePrintHostSendDialog::EndModal().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ extendedInfo()

std::map< std::string, std::string > Slic3r::GUI::CrealityPrintHostSendDialog::extendedInfo ( ) const

overridevirtual

Reimplemented from Slic3r::GUI::PrintHostSendDialog.

{
    std::map<std::string, std::string> info;
    info["enableSelfTest"] = m_enableSelfTest ? "1" : "0";
 
    // Color mapping: colorMatch_0, colorMatch_1, ... tab-delimited
    for (int i = 0; i < (int)m_slot_combos.size(); i++) {
        int sel = m_slot_combos[i]->GetSelection();
        if (sel >= 0 && sel < (int)m_printer_slots.size()) {
            auto& slot = m_printer_slots[sel];
            // id = gcode tool index (T1A for first filament, T1B for second, ...),
            // not the destination CFS slot — firmware matches by gcode tool.
            std::string gcode_tool = "T1" + std::string(1, 'A' + i);
            info["colorMatch_" + std::to_string(i)] =
                gcode_tool + "\t" + slot.type + "\t" + slot.color + "\t" +
                std::to_string(slot.box_id) + "\t" + std::to_string(slot.material_id);
        }
    }
 
    return info;
}

References m_enableSelfTest, m_printer_slots, and m_slot_combos.

◆ filename()

fs::path Slic3r::GUI::PrintHostSendDialog::filename ( ) const

inherited

{
    return into_path(txt_filename->GetValue());
}

References Slic3r::GUI::into_path(), and txt_filename.

Referenced by Slic3r::GUI::FlashforgePrintHostSendDialog::init().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ finalize()

void Slic3r::GUI::MsgDialog::finalize ( )

protectedinherited

{
    GetSizer()->SetSizeHints(this);
    Layout();
    Fit();
    CenterOnParent();
    wxGetApp().UpdateDlgDarkUI(this);
}

Here is the caller graph for this function:

◆ force_rescale()

bool Slic3r::GUI::DPIAware< wxDialog >::force_rescale ( ) const

inlineinherited

201{ return m_force_rescale; }

◆ get_button()

Button * Slic3r::GUI::MsgDialog::get_button ( wxWindowID btn_id )

protectedinherited

                                              {
    return static_cast<Button*>(FindWindowById(btn_id, this));
}

Referenced by Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), and SetButtonLabel().

Here is the caller graph for this function:

◆ get_checkbox_state()

bool Slic3r::GUI::MsgDialog::get_checkbox_state ( )

inherited

{
    if (m_checkbox_dsa) {
        return m_checkbox_dsa->GetValue();
    }
    return false;
}

References m_checkbox_dsa.

Referenced by Slic3r::DevNozzleRack::CheckRackMoveWarningDlg(), Slic3r::GUI::Plater::close_with_confirm(), Slic3r::GUI::confirm_create_decompose_missing_components(), Slic3r::DevNozzleRack::CtrlRackUpgrade(), Slic3r::GUI::ObjectList::layers_editing(), Slic3r::GUI::Plater::priv::load_files(), Slic3r::GUI::Plater::priv::on_action_layersediting(), Slic3r::GUI::MediaPlayCtrl::ToggleStream(), and Slic3r::GUI::ConfigManipulation::update_print_fff_config().

Here is the caller graph for this function:

◆ group()

std::string Slic3r::GUI::PrintHostSendDialog::group ( ) const

inherited

{
     if (combo_groups == nullptr) {
         return "";
     } else {
         wxString group = combo_groups->GetValue();
         return into_u8(group);
    }
}

References combo_groups, group(), and Slic3r::GUI::into_u8().

Referenced by EndModal(), and group().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ init()

void Slic3r::GUI::CrealityPrintHostSendDialog::init ( )

overridevirtual

Reimplemented from Slic3r::GUI::PrintHostSendDialog.

{
    PrintHostSendDialog::init();
 
    auto* creality_host = static_cast<CrealityPrint*>(m_printhost);
    bool multi_color;
    std::string printer_name;
    {
        wxBusyCursor wait;
        multi_color = creality_host->supports_multi_color_print();
        if (multi_color)
            printer_name = creality_host->model_name();
    }
    if (!multi_color)
        return;
 
    auto* group_box = new wxStaticBox(this, wxID_ANY,
        wxString::Format(_L("Printer: %s"), printer_name));
    auto* group_sizer = new wxStaticBoxSizer(group_box, wxVERTICAL);
    content_sizer->Add(group_sizer, 0, wxEXPAND);
 
    const AppConfig* app_config = wxGetApp().app_config;
    std::string saved = app_config->get("recent", CONFIG_KEY_ENABLESELFTEST);
    if (!saved.empty()) {
        try { m_enableSelfTest = std::stoi(saved) != 0; } catch (...) {}
    }
 
    // Calibration checkbox
    {
        auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
        auto checkbox       = new ::CheckBox(this);
        checkbox->SetValue(m_enableSelfTest);
        checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
            m_enableSelfTest = e.IsChecked();
            AppConfig* ac = wxGetApp().app_config;
            ac->set("recent", CONFIG_KEY_ENABLESELFTEST, m_enableSelfTest ? "1" : "0");
            e.Skip();
        });
        checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
        auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Calibrate before printing"), wxDefaultPosition, wxDefaultSize, 0);
        checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
        checkbox_text->SetFont(::Label::Body_13);
        checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
        group_sizer->Add(checkbox_sizer);
        group_sizer->AddSpacer(VERT_SPACING);
    }
 
    // --- Color mapping UI ---
    // Get gcode filament info from slicer
    auto  preset_bundle    = wxGetApp().preset_bundle;
    auto  full_config      = preset_bundle->full_config();
    auto* filament_colors  = full_config.option<ConfigOptionStrings>("filament_colour");
    auto* filament_types   = full_config.option<ConfigOptionStrings>("filament_type");
    int   gcode_filament_count = filament_colors ? (int)filament_colors->values.size() : 0;
 
    // Query printer for loaded materials
    {
        wxBusyCursor wait;
        std::string boxes_json = creality_host->query_boxes_info();
        if (!boxes_json.empty()) {
            try {
                auto resp = nlohmann::json::parse(boxes_json);
                if (resp.contains("boxsInfo") && resp["boxsInfo"].contains("materialBoxs")) {
                    for (auto& box : resp["boxsInfo"]["materialBoxs"]) {
                        int box_id = box["id"].get<int>();
                        int box_type = box.value("type", 0);
                        // Skip inactive CFS boxes (type 0 with state != 1)
                        // Spool holder (type 1) is always available
                        if (box_type == 0 && box.value("state", 0) != 1)
                            continue;
                        for (auto& mat : box["materials"]) {
                            int slot_id = mat["id"].get<int>();
                            std::string tool_id = "T" + std::to_string(box_id) + std::string(1, 'A' + slot_id);
                            // Creality uses "#0RRGGBB" (7 hex digits), normalize to "#RRGGBB"
                            std::string color = mat.value("color", "#FFFFFF");
                            if (color.size() == 8 && color[0] == '#')
                                color = "#" + color.substr(2);
                            m_printer_slots.push_back({
                                tool_id,
                                mat.value("type", ""),
                                color,
                                box_id,
                                slot_id
                            });
                        }
                    }
                }
            } catch (const nlohmann::json::exception& e) {
                BOOST_LOG_TRIVIAL(error) << "CrealityPrint dialog: Failed to parse boxsInfo: " << e.what();
            }
        }
    }
 
    if (gcode_filament_count > 0 && !m_printer_slots.empty()) {
        auto* label = new wxStaticText(this, wxID_ANY, _L("Filament Mapping:"));
        label->SetFont(::Label::Body_13);
        label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
        group_sizer->Add(label);
        group_sizer->AddSpacer(4);
 
        for (int i = 0; i < gcode_filament_count; i++) {
            auto* row_sizer = new wxBoxSizer(wxHORIZONTAL);
 
            // Left side: gcode filament color swatch + type
            std::string gc_color = (filament_colors && i < (int)filament_colors->values.size())
                                   ? filament_colors->values[i] : "#FFFFFF";
            std::string gc_type  = (filament_types && i < (int)filament_types->values.size())
                                   ? filament_types->values[i] : "?";
 
            // Color indicator panel
            auto* color_panel = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(16), FromDIP(16)));
            color_panel->SetBackgroundColour(wxColour(gc_color));
            color_panel->SetMinSize(wxSize(FromDIP(16), FromDIP(16)));
            row_sizer->Add(color_panel, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, FromDIP(4));
 
            auto* type_label = new wxStaticText(this, wxID_ANY,
                wxString::Format("%d (%s)", i + 1, gc_type.c_str()));
            type_label->SetFont(::Label::Body_13);
            type_label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
            type_label->SetMinSize(wxSize(FromDIP(80), -1));
            row_sizer->Add(type_label, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, FromDIP(8));
 
            // Arrow
            auto* arrow_label = new wxStaticText(this, wxID_ANY, wxString::FromUTF8("\xe2\x86\x92"));
            arrow_label->SetFont(::Label::Body_13);
            row_sizer->Add(arrow_label, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, FromDIP(8));
 
            // Right side: dropdown with color icons per slot
            int icon_sz = FromDIP(16);
            auto* combo = new BitmapComboBox(this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0, nullptr, wxCB_READONLY);
            for (auto& slot : m_printer_slots) {
                wxBitmap* bmp = get_extruder_color_icon(slot.color, "", icon_sz, icon_sz);
                wxString label_str;
                if (slot.box_id == 0)
                    // TRN External spool slot, followed by its filament type
                    label_str = wxString::Format(_L("Ext - %s"), slot.type.c_str());
                else
                    label_str = wxString::Format("%s - %s", slot.tool_id.substr(1).c_str(), slot.type.c_str());
                combo->Append(label_str, bmp ? *bmp : wxNullBitmap);
            }
            // Find best default: CFS exact color+type, CFS type-only,
            // Ext exact, Ext type-only, else positional
            int default_sel = (i < (int)m_printer_slots.size()) ? i : 0;
            bool matched = false;
            for (int pass = 0; pass < 4 && !matched; pass++) {
                for (int s = 0; s < (int)m_printer_slots.size(); s++) {
                    bool is_ext = (m_printer_slots[s].box_id == 0);
                    bool type_match = (m_printer_slots[s].type == gc_type);
                    bool color_match = (wxColour(m_printer_slots[s].color) == wxColour(gc_color));
                    bool hit = false;
                    switch (pass) {
                    case 0: hit = !is_ext && type_match && color_match; break;
                    case 1: hit = !is_ext && type_match; break;
                    case 2: hit = is_ext && type_match && color_match; break;
                    case 3: hit = is_ext && type_match; break;
                    }
                    if (hit) {
                        default_sel = s;
                        matched = true;
                        break;
                    }
                }
            }
            combo->SetSelection(default_sel);
            row_sizer->Add(combo, 0, wxALIGN_CENTER_VERTICAL);
 
            group_sizer->Add(row_sizer);
            group_sizer->AddSpacer(4);
            m_slot_combos.push_back(combo);
        }
 
        int ext_slot_idx = -1;
        for (int s = 0; s < (int)m_printer_slots.size(); s++) {
            if (m_printer_slots[s].box_id == 0) {
                ext_slot_idx = s;
                break;
            }
        }
        if (ext_slot_idx >= 0) {
            for (int ci = 0; ci < (int)m_slot_combos.size(); ci++) {
                int sel = m_slot_combos[ci]->GetSelection();
                if (sel >= 0 && sel < (int)m_printer_slots.size() &&
                    m_printer_slots[sel].box_id == 0) {
                    for (int cj = 0; cj < (int)m_slot_combos.size(); cj++) {
                        if (cj != ci)
                            m_slot_combos[cj]->Enable(false);
                    }
                    break;
                }
            }
 
            for (auto* c : m_slot_combos) {
                c->Bind(wxEVT_COMBOBOX, [this](wxCommandEvent& e) {
                    int sel = e.GetSelection();
                    if (sel >= 0 && sel < (int)m_printer_slots.size() &&
                        m_printer_slots[sel].box_id == 0) {
                        for (auto* c2 : m_slot_combos) {
                            if (c2 != e.GetEventObject())
                                c2->Enable(false);
                        }
                    } else {
                        for (auto* c2 : m_slot_combos)
                            c2->Enable(true);
                    }
                    e.Skip();
                });
            }
        }
    }
 
    this->Layout();
    this->Fit();
}

References _L, Label::Body_13, CONFIG_KEY_ENABLESELFTEST, Slic3r::GUI::MsgDialog::content_sizer, StateColor::darkModeColorFor(), Slic3r::GUI::filament_types, Slic3r::AppConfig::get(), get_extruder_color_icon(), Slic3r::GUI::PrintHostSendDialog::init(), m_enableSelfTest, m_printer_slots, m_printhost, m_slot_combos, Slic3r::AppConfig::set(), Slic3r::ConfigOptionVector< T >::values, Slic3r::GUI::MsgDialog::VERT_SPACING, and wxStaticText.

Here is the call graph for this function:

◆ is_new_scale_factor()

bool Slic3r::GUI::DPIAware< wxDialog >::is_new_scale_factor ( ) const

inlineprivateinherited

262{ return fabs(m_scale_factor - m_prev_scale_factor) > 0.001; }

◆ normal_font()

const wxFont & Slic3r::GUI::DPIAware< wxDialog >::normal_font ( ) const

inlineinherited

205{ return m_normal_font; }

Here is the caller graph for this function:

◆ on_dpi_changed()

void Slic3r::GUI::MsgDialog::on_dpi_changed ( const wxRect & suggested_rect )

virtualinherited

Implements Slic3r::GUI::DPIAware< wxDialog >.

 {
     if (m_buttons.size() > 0) {
         MsgButtonsHash::iterator i = m_buttons.begin();
 
         while (i != m_buttons.end()) {
             MsgButton *bd   = i->second;
             /* ORCA not required since all buttons has same size and Rescale re applies its style
             wxSize     bsize;
 
 
             switch (bd->buttondata->type) {
                case ButtonSizeNormal:bsize = MSG_DIALOG_BUTTON_SIZE;break;
                case ButtonSizeMiddle: bsize = MSG_DIALOG_MIDDLE_BUTTON_SIZE; break;
                case ButtonSizeLong: bsize = MSG_DIALOG_LONG_BUTTON_SIZE; break;
                default: break;
             }
 
             bd->buttondata->button->SetMinSize(bsize);
             */
             bd->buttondata->button->Rescale();
             i++;
         }
     }
 }

References bd, and m_buttons.

◆ on_sys_color_changed()

virtual void Slic3r::GUI::DPIAware< wxDialog >::on_sys_color_changed ( )

inlineprotectedvirtualinherited

Reimplemented in PrintHostQueueDialog, Slic3r::GUI::ColorPickerDialog, Slic3r::GUI::ConfigWizard, Slic3r::GUI::DesignTextDialog, Slic3r::GUI::DiffPresetDialog, Slic3r::GUI::EditGCodeDialog, Slic3r::GUI::MultiMachinePickPage, Slic3r::GUI::ObjectTableDialog, Slic3r::GUI::PhysicalPrinterDialog, Slic3r::GUI::PrintHostQueueDialog, Slic3r::GUI::PublishSettingsDialog, Slic3r::GUI::SavePresetDialog, Slic3r::GUI::SendMultiMachinePage, and Slic3r::GUI::UnsavedChangesDialog.

226{};

◆ post_action()

PrintHostPostUploadAction Slic3r::GUI::PrintHostSendDialog::post_action ( ) const

inherited

{
    return post_upload_action;
}

References post_upload_action.

◆ prev_scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::prev_scale_factor ( ) const

inlineinherited

196{ return m_prev_scale_factor; }

◆ rescale()

void Slic3r::GUI::DPIAware< wxDialog >::rescale ( const wxRect & suggested_rect )

inlineprivateinherited

    {
        this->Freeze();
 
        m_force_rescale = false;
 
        // set normal application font as a current window font
        m_normal_font = this->GetFont();
 
        update_em_unit();
 
        // rescale missed controls sizes and images
        on_dpi_changed(suggested_rect);
 
        this->Layout();
        this->Thaw();
 
        // reset previous scale factor from current scale factor value
        m_prev_scale_factor = m_scale_factor;
    }

◆ scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::scale_factor ( ) const

inlineinherited

195{ return m_scale_factor; }

◆ set_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::set_em_unit ( int v )

inlineinherited

200{ m_em_unit = v; }

◆ set_prev_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_prev_scale_factor ( float v )

inlineinherited

199{ m_prev_scale_factor = v; }

◆ set_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_scale_factor ( float v )

inlineinherited

198{ m_scale_factor = v; }

◆ SetButtonLabel()

void Slic3r::GUI::MsgDialog::SetButtonLabel	(	wxWindowID	btn_id,
		const wxString &	label,
		bool	set_focus = false )

inherited

{
    if (Button* btn = get_button(btn_id)) {
        btn->SetLabel(label);
        if (set_focus)
            btn->SetFocus();
    }
}

References get_button().

Referenced by Slic3r::GUI::MixedFilamentWarningDialog::MixedFilamentWarningDialog(), Slic3r::GUI::ConfigManipulation::check_layer_height(), Slic3r::GUI::FanControlNew::check_printing_state(), Slic3r::GUI::FanOperate::check_printing_state(), Slic3r::DevNozzleRack::CtrlRackReadAll(), Slic3r::DevNozzleRack::CtrlRackUpgrade(), Slic3r::GUI::ObjectList::del_from_cut_object(), Slic3r::GUI::Plater::priv::delete_object_from_model(), Slic3r::GUI::Field::get_value_by_opt_type(), Slic3r::GUI::GUI_App::handle_web_request(), Slic3r::GUI::ConfigManipulation::layer_height_out_of_range_dialog(), Slic3r::GUI::Plater::priv::load_files(), Slic3r::GUI::StatusPanel::on_lamp_switch(), Slic3r::GUI::TextureImportDialog::on_mesh_repair_decision_required(), Slic3r::GUI::Tab::on_value_change(), Slic3r::GUI::AMSSettingTypePanel::OnAmsTypeChanged(), Slic3r::GUI::run_scene_benchmark(), Slic3r::GUI::FanControlPopupNew::UpdatePartSubMode(), and Slic3r::GUI::Tab::validate_filament_temperature_pairs().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ show_dsa_button()

void Slic3r::GUI::MsgDialog::show_dsa_button ( wxString const & title = {} )

inherited

{
    m_checkbox_dsa = new CheckBox(this);
    m_dsa_sizer->Add(m_checkbox_dsa, 0, wxALIGN_CENTER);
    m_checkbox_dsa->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
        auto event = wxCommandEvent(EVT_CHECKBOX_CHANGE);
        event.SetInt(m_checkbox_dsa->GetValue()?1:0);
        event.SetEventObject(this);
        wxPostEvent(this, event);
        e.Skip();
    });
 
    auto  m_text_dsa = new wxStaticText(this, wxID_ANY, title.IsEmpty() ? _L("Don't show again") : title, wxDefaultPosition, wxDefaultSize, 0);
    auto on_toggle = [this]() {
        m_checkbox_dsa->SetValue(!m_checkbox_dsa->GetValue());
        wxCommandEvent ev(wxEVT_TOGGLEBUTTON, m_checkbox_dsa->GetId());
        ev.SetEventObject(m_checkbox_dsa);
        m_checkbox_dsa->GetEventHandler()->ProcessEvent(ev);
    };
    m_text_dsa->Bind(wxEVT_LEFT_DOWN,   [on_toggle](wxMouseEvent& e) {if(!e.LeftDClick()) on_toggle();});
    m_text_dsa->Bind(wxEVT_LEFT_DCLICK, [on_toggle](wxMouseEvent& e) {on_toggle();});
 
    m_dsa_sizer->Add(m_text_dsa, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
    m_dsa_sizer->AddSpacer(FromDIP(10)); // spacing after checkbox
    m_text_dsa->SetFont(::Label::Body_13);
    m_text_dsa->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
    btn_sizer->Layout();
    Fit();
}

References _L, Label::Body_13, btn_sizer, StateColor::darkModeColorFor(), m_checkbox_dsa, m_dsa_sizer, Slic3r::GUI::wxMouseEvent, and wxStaticText.

Referenced by Slic3r::DevNozzleRack::CheckRackMoveWarningDlg(), Slic3r::GUI::Plater::close_with_confirm(), Slic3r::GUI::confirm_create_decompose_missing_components(), Slic3r::DevNozzleRack::CtrlRackUpgrade(), Slic3r::GUI::ObjectList::layers_editing(), Slic3r::GUI::Plater::priv::load_files(), Slic3r::GUI::Plater::priv::on_action_layersediting(), Slic3r::GUI::RichMessageDialog::ShowModal(), Slic3r::GUI::MediaPlayCtrl::ToggleStream(), and Slic3r::GUI::ConfigManipulation::update_print_fff_config().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ShowModal()

int Slic3r::GUI::DPIAware< wxDialog >::ShowModal ( )

inlineinherited

    {
        dialogStack.push_front(this);
        int r = wxDialog::ShowModal();
        dialogStack.pop_front();
        return r;
    }

Referenced by Slic3r::GUI::EditFilamentPresetDialog::delete_preset(), Slic3r::GUI::SingleChoiceDialog::GetSingleChoiceIndex(), Slic3r::GUI::ConfirmBeforeSendDialog::on_show(), Slic3r::GUI::PrivacyUpdateDialog::on_show(), Slic3r::GUI::AMSMaterialsSetting::Popup(), Slic3r::GUI::ExtrusionCalibration::Popup(), Slic3r::GUI::ObjectTableDialog::Popup(), Slic3r::GUI::ConfigWizard::run(), Slic3r::GUI::GuideFrame::run(), Slic3r::GUI::MultiNozzleSyncDialog::ShowModal(), Slic3r::GUI::RichMessageDialog::ShowModal(), Slic3r::GUI::TextureImportDialog::ShowModal(), and Slic3r::GUI::UnsavedChangesDialog::ShowModal().

Here is the caller graph for this function:

◆ storage()

std::string Slic3r::GUI::PrintHostSendDialog::storage ( ) const

inherited

{
    if (!combo_storage)
        return GUI::format("%1%", m_preselected_storage);
    if (combo_storage->GetSelection() < 0 || combo_storage->GetSelection() >= int(m_paths.size()))
        return {};
    return into_u8(m_paths[combo_storage->GetSelection()]);
}

References combo_storage, Slic3r::GUI::format(), Slic3r::GUI::into_u8(), m_paths, and m_preselected_storage.

Referenced by EndModal().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ switch_to_device_tab()

bool Slic3r::GUI::PrintHostSendDialog::switch_to_device_tab ( ) const

inlineinherited

47{return m_switch_to_device_tab;}

Slic3r::GUI::PrintHostSendDialog::m_switch_to_device_tab

bool m_switch_to_device_tab

Definition PrintHostDialogs.hpp:61

References m_switch_to_device_tab.

Referenced by Slic3r::GUI::CrealityPrintHostSendDialog::CrealityPrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::ElegooPrintHostSendDialog(), Slic3r::GUI::FlashforgePrintHostSendDialog::FlashforgePrintHostSendDialog(), and PrintHostSendDialog().

Here is the caller graph for this function:

◆ update_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::update_em_unit ( )

inlineprivateinherited

    {
        // Linux specific issue : get_dpi_for_window(this) still doesn't responce to the Display's scale in new wxWidgets(3.1.3).
        // So, calculate the m_em_unit value from the font size, as before
#if !defined(__WXGTK__)
        m_em_unit = std::max<size_t>(10, 10.0f * m_scale_factor);
#else
        // initialize default width_unit according to the width of the one symbol ("m") of the currently active font of this window.
        m_em_unit = std::max<size_t>(10, this->GetTextExtent("m").x - 1);
#endif // __WXGTK__
    }

Member Data Documentation

◆ boldfont

wxFont Slic3r::GUI::MsgDialog::boldfont

protectedinherited

Referenced by MsgDialog(), and Slic3r::GUI::MsgUpdateForced::MsgUpdateForced().

◆ btn_sizer

wxBoxSizer* Slic3r::GUI::MsgDialog::btn_sizer

protectedinherited

Referenced by MsgDialog(), add_button(), and show_dsa_button().

◆ combo_groups

wxComboBox* Slic3r::GUI::PrintHostSendDialog::combo_groups

protectedinherited

Referenced by PrintHostSendDialog(), EndModal(), group(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), and init().

◆ combo_storage

wxComboBox* Slic3r::GUI::PrintHostSendDialog::combo_storage

protectedinherited

Referenced by PrintHostSendDialog(), EndModal(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), init(), and storage().

◆ CONFIG_KEY_ENABLESELFTEST

const char* Slic3r::GUI::CrealityPrintHostSendDialog::CONFIG_KEY_ENABLESELFTEST = "crealityprint_enable_self_test"

staticconstexprprivate

Referenced by init().

◆ content_sizer

wxBoxSizer* Slic3r::GUI::MsgDialog::content_sizer

protectedinherited

Referenced by Slic3r::GUI::ErrorDialog::ErrorDialog(), Slic3r::GUI::InfoDialog::InfoDialog(), Slic3r::GUI::MessageDialog::MessageDialog(), Slic3r::GUI::MixedFilamentWarningDialog::MixedFilamentWarningDialog(), MsgDialog(), Slic3r::GUI::MsgNoUpdates::MsgNoUpdates(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), Slic3r::GUI::RichMessageDialog::RichMessageDialog(), Slic3r::GUI::WarningDialog::WarningDialog(), Slic3r::GUI::FilamentWarningDialog::BuildContent(), Slic3r::GUI::CrealityPrintHostSendDialog::init(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), Slic3r::GUI::PrintHostSendDialog::init(), and Slic3r::GUI::DownloadDialog::SetExtendedMessage().

◆ logo

wxStaticBitmap* Slic3r::GUI::MsgDialog::logo

protectedinherited

Referenced by Slic3r::GUI::ErrorDialog::ErrorDialog(), MsgDialog(), and apply_style().

◆ m_buttons

MsgButtonsHash Slic3r::GUI::MsgDialog::m_buttons

protectedinherited

Referenced by ~MsgDialog(), add_button(), and on_dpi_changed().

◆ m_can_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_can_rescale

privateinherited

235{ true };

◆ m_checkbox_dsa

CheckBox* Slic3r::GUI::MsgDialog::m_checkbox_dsa {nullptr}

protectedinherited

109{nullptr};

Referenced by get_checkbox_state(), Slic3r::GUI::RichMessageDialog::IsCheckBoxChecked(), show_dsa_button(), and Slic3r::GUI::RichMessageDialog::ShowModal().

◆ m_dsa_sizer

wxBoxSizer* Slic3r::GUI::MsgDialog::m_dsa_sizer

protectedinherited

Referenced by MsgDialog(), and show_dsa_button().

◆ m_em_unit

int Slic3r::GUI::DPIAware< wxDialog >::m_em_unit

privateinherited

◆ m_enableSelfTest

bool Slic3r::GUI::CrealityPrintHostSendDialog::m_enableSelfTest

private

Referenced by CrealityPrintHostSendDialog(), extendedInfo(), and init().

◆ m_force_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_force_rescale

privateinherited

236{ false };

◆ m_forward_str

wxString Slic3r::GUI::MsgDialog::m_forward_str

protectedinherited

Referenced by MsgDialog(), and apply_style().

◆ m_new_font_point_size

int Slic3r::GUI::DPIAware< wxDialog >::m_new_font_point_size

privateinherited

◆ m_normal_font

wxFont Slic3r::GUI::DPIAware< wxDialog >::m_normal_font

privateinherited

◆ m_path

boost::filesystem::path Slic3r::GUI::PrintHostSendDialog::m_path

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

◆ m_paths

wxArrayString Slic3r::GUI::PrintHostSendDialog::m_paths

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), init(), and storage().

◆ m_post_actions

PrintHostPostUploadActions Slic3r::GUI::PrintHostSendDialog::m_post_actions

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

◆ m_preselected_storage

wxString Slic3r::GUI::PrintHostSendDialog::m_preselected_storage

protectedinherited

Referenced by Slic3r::GUI::ElegooPrintHostSendDialog::init(), init(), and storage().

◆ m_prev_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_prev_scale_factor

privateinherited

◆ m_printer_slots

std::vector<SlotInfo> Slic3r::GUI::CrealityPrintHostSendDialog::m_printer_slots

private

Referenced by extendedInfo(), and init().

◆ m_printhost

PrintHost* Slic3r::GUI::CrealityPrintHostSendDialog::m_printhost

private

Referenced by CrealityPrintHostSendDialog(), and init().

◆ m_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_scale_factor

privateinherited

◆ m_slot_combos

std::vector<BitmapComboBox*> Slic3r::GUI::CrealityPrintHostSendDialog::m_slot_combos

private

Referenced by extendedInfo(), and init().

◆ m_storage_names

wxArrayString Slic3r::GUI::PrintHostSendDialog::m_storage_names

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), and init().

◆ m_switch_to_device_tab

bool Slic3r::GUI::PrintHostSendDialog::m_switch_to_device_tab

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), init(), and switch_to_device_tab().

◆ m_valid_suffix

wxString Slic3r::GUI::PrintHostSendDialog::m_valid_suffix

protectedinherited

Referenced by Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

◆ post_upload_action

PrintHostPostUploadAction Slic3r::GUI::PrintHostSendDialog::post_upload_action

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::EndModal(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), init(), post_action(), and Slic3r::GUI::ElegooPrintHostSendDialog::refresh().

◆ txt_filename

wxTextCtrl* Slic3r::GUI::PrintHostSendDialog::txt_filename

protectedinherited

Referenced by PrintHostSendDialog(), EndModal(), filename(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

The documentation for this class was generated from the following files:

/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/PrintHostDialogs.hpp
/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/PrintHostDialogs.cpp

	OrcaSlicer latest OrcaSlicer

Classes

Public Member Functions

Protected Types

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Static Private Attributes

Detailed Description

Class Documentation

◆ Slic3r::GUI::CrealityPrintHostSendDialog::SlotInfo

Member Enumeration Documentation

◆ anonymous enum

Constructor & Destructor Documentation

◆ CrealityPrintHostSendDialog()

Member Function Documentation

◆ add_button()

◆ AddButton()

◆ apply_style()

◆ em_unit()

◆ enable_force_rescale()

◆ EndModal()

◆ extendedInfo()

◆ filename()

◆ finalize()

◆ force_rescale()

◆ get_button()

◆ get_checkbox_state()

◆ group()

◆ init()

◆ is_new_scale_factor()

◆ normal_font()

◆ on_dpi_changed()

◆ on_sys_color_changed()

◆ post_action()

◆ prev_scale_factor()

◆ rescale()

◆ scale_factor()

◆ set_em_unit()

◆ set_prev_scale_factor()

◆ set_scale_factor()

◆ SetButtonLabel()

◆ show_dsa_button()

◆ ShowModal()

◆ storage()

◆ switch_to_device_tab()

◆ update_em_unit()

Member Data Documentation

◆ boldfont

◆ btn_sizer

◆ combo_groups

◆ combo_storage

◆ CONFIG_KEY_ENABLESELFTEST

◆ content_sizer

◆ logo

◆ m_buttons

◆ m_can_rescale

◆ m_checkbox_dsa

◆ m_dsa_sizer

◆ m_em_unit

◆ m_enableSelfTest

◆ m_force_rescale

◆ m_forward_str

◆ m_new_font_point_size

◆ m_normal_font

◆ m_path

◆ m_paths

◆ m_post_actions

◆ m_preselected_storage

◆ m_prev_scale_factor

◆ m_printer_slots

◆ m_printhost

◆ m_scale_factor

◆ m_slot_combos

◆ m_storage_names

◆ m_switch_to_device_tab

◆ m_valid_suffix

◆ post_upload_action

◆ txt_filename