Slic3r::GUI::ElegooPrintHostSendDialog Class Reference

#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/PrintHostDialogs.hpp>

Inheritance diagram for Slic3r::GUI::ElegooPrintHostSendDialog:

Collaboration diagram for Slic3r::GUI::ElegooPrintHostSendDialog:

Public Member Functions
	ElegooPrintHostSendDialog (const boost::filesystem::path &path, PrintHostPostUploadActions post_actions, const wxArrayString &groups, const wxArrayString &storage_paths, const wxArrayString &storage_names, bool switch_to_device_tab)
virtual void	EndModal (int ret) override
int	timeLapse () const
int	heatedBedLeveling () const
BedType	bedType () const
virtual void	init () override
virtual std::map< std::string, std::string >	extendedInfo () const override
boost::filesystem::path	filename () const
PrintHostPostUploadAction	post_action () const
std::string	group () const
std::string	storage () const
bool	switch_to_device_tab () const
void	show_dsa_button (wxString const &title={})
bool	get_checkbox_state ()
virtual void	on_dpi_changed (const wxRect &suggested_rect)
void	SetButtonLabel (wxWindowID btn_id, const wxString &label, bool set_focus=false)
void	AddButton (wxWindowID btn_id, const wxString &label, bool set_focus=false)
float	scale_factor () const
float	prev_scale_factor () const
void	set_scale_factor (float v)
void	set_prev_scale_factor (float v)
void	set_em_unit (int v)
bool	force_rescale () const
int	em_unit () const
const wxFont &	normal_font () const
void	enable_force_rescale ()
int	ShowModal ()

Protected Types
enum	{   BORDER = 20 , LOGO_SPACING = 25 , LOGO_GAP = 20 , CONTENT_WIDTH = 242 ,   CONTENT_MAX_HEIGHT = 60 , BTN_SPACING = 20 , VERT_SPACING = 15 }

Protected Member Functions
Button *	add_button (wxWindowID btn_id, bool set_focus=false, const wxString &label=wxString())
Button *	get_button (wxWindowID btn_id)
void	apply_style (long style)
void	finalize ()
virtual void	on_sys_color_changed ()

Protected Attributes
wxTextCtrl *	txt_filename
wxComboBox *	combo_groups
wxComboBox *	combo_storage
PrintHostPostUploadAction	post_upload_action
wxString	m_valid_suffix
wxString	m_preselected_storage
wxArrayString	m_paths
bool	m_switch_to_device_tab
boost::filesystem::path	m_path
PrintHostPostUploadActions	m_post_actions
wxArrayString	m_storage_names
wxFont	boldfont
wxBoxSizer *	content_sizer
wxBoxSizer *	btn_sizer
wxBoxSizer *	m_dsa_sizer
wxStaticBitmap *	logo
MsgButtonsHash	m_buttons
CheckBox *	m_checkbox_dsa {nullptr}
wxString	m_forward_str

Private Member Functions
BedType	appBedType () const
void	refresh ()
void	update_em_unit ()
bool	is_new_scale_factor () const
void	rescale (const wxRect &suggested_rect)

Private Attributes
const char *	CONFIG_KEY_UPLOADANDPRINT = "elegoolink_upload_and_print"
const char *	CONFIG_KEY_TIMELAPSE = "elegoolink_timelapse"
const char *	CONFIG_KEY_HEATEDBEDLEVELING = "elegoolink_heated_bed_leveling"
const char *	CONFIG_KEY_BEDTYPE = "elegoolink_bed_type"
wxStaticText *	warning_text {nullptr}
wxBoxSizer *	uploadandprint_sizer {nullptr}
int	m_timeLapse
int	m_heatedBedLeveling
BedType	m_BedType
float	m_scale_factor
int	m_em_unit
wxFont	m_normal_font
float	m_prev_scale_factor
bool	m_can_rescale
bool	m_force_rescale
int	m_new_font_point_size

Detailed Description

Member Enumeration Documentation

anonymous enum

anonymous enum

protectedinherited

Enumerator
BORDER
LOGO_SPACING
LOGO_GAP
CONTENT_WIDTH
CONTENT_MAX_HEIGHT
BTN_SPACING
VERT_SPACING

       {
    BORDER = 20,
    LOGO_SPACING = 25,
    LOGO_GAP = 20,
    CONTENT_WIDTH = 242,
    CONTENT_MAX_HEIGHT = 60,//TO
    BTN_SPACING = 20,
    VERT_SPACING = 15,//TO
  };

Constructor & Destructor Documentation

ElegooPrintHostSendDialog()

Slic3r::GUI::ElegooPrintHostSendDialog::ElegooPrintHostSendDialog	(	const boost::filesystem::path &	path,
		PrintHostPostUploadActions	post_actions,
		const wxArrayString &	groups,
		const wxArrayString &	storage_paths,
		const wxArrayString &	storage_names,
		bool	switch_to_device_tab )

    : PrintHostSendDialog(path, post_actions, groups, storage_paths, storage_names, switch_to_device_tab)
    , m_timeLapse(0)
    , m_heatedBedLeveling(0)
    , m_BedType(BedType::btPTE)
{}

References Slic3r::GUI::PrintHostSendDialog::PrintHostSendDialog(), Slic3r::btPTE, m_BedType, m_heatedBedLeveling, m_timeLapse, and Slic3r::GUI::PrintHostSendDialog::switch_to_device_tab().

Here is the call graph for this function:

Member Function Documentation

add_button()

Button * Slic3r::GUI::MsgDialog::add_button ( wxWindowID btn_id, bool set_focus = false, const wxString & label = wxString() )

protectedinherited

{
    Button* btn = new Button(this, label, "", 0, 0, btn_id);
    /* ORCA not required since all buttons has same size and Rescale re applies its style
    ButtonSizeType type;
 
    if (label.length() < 5) {
        type = ButtonSizeNormal;
        btn->SetMinSize(MSG_DIALOG_BUTTON_SIZE); // ?????
    }
    else if (label.length() >= 5 && label.length() < 8) {
        type = ButtonSizeMiddle;
        btn->SetMinSize(MSG_DIALOG_MIDDLE_BUTTON_SIZE);
    } 
    else if (label.length() >= 8 && label.length() < 12) {
        type = ButtonSizeMiddle;
        btn->SetMinSize(MSG_DIALOG_LONG_BUTTON_SIZE);
    } else {
        type = ButtonSizeLong;
        btn->SetMinSize(MSG_DIALOG_LONGER_BUTTON_SIZE);
    }
    */
 
    if (btn_id == wxID_OK || btn_id == wxID_YES || btn_id == wxFORWARD) {
        btn->SetStyle(ButtonStyle::Confirm, ButtonType::Choice);
    }
 
    if (btn_id == wxID_CANCEL || btn_id == wxID_NO) {
        btn->SetStyle(ButtonStyle::Regular, ButtonType::Choice);
    }
 
    if (set_focus)
        btn->SetFocus();
    btn_sizer->Add(btn, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, FromDIP(ButtonProps::ChoiceButtonGap()));
    btn->Bind(wxEVT_BUTTON, [this, btn_id](wxCommandEvent&) { EndModal(btn_id); });
 
    MsgButton *mb = new MsgButton;
    ButtonData *bd = new ButtonData;
 
    bd->button = btn;
    //bd->type   = type;
 
    // m_buttons.size() is a size_t, which does not match the %d conversion
    mb->id        = wxString(std::to_string(m_buttons.size()));
    mb->buttondata = bd;
    m_buttons[ wxString(std::to_string(m_buttons.size()))] = mb;
    return btn;
};

References bd, btn_sizer, Slic3r::GUI::MsgButton::buttondata, Choice, ButtonProps::ChoiceButtonGap(), Confirm, Slic3r::GUI::DPIDialog::EndModal(), Slic3r::GUI::MsgButton::id, m_buttons, Regular, and Button::SetStyle().

Referenced by Slic3r::GUI::ConfigsOverwriteConfirmDialog::ConfigsOverwriteConfirmDialog(), Slic3r::GUI::DownloadDialog::DownloadDialog(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), AddButton(), apply_style(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and Slic3r::GUI::PrintHostSendDialog::init().

Here is the call graph for this function:

Here is the caller graph for this function:

AddButton()

void Slic3r::GUI::MsgDialog::AddButton ( wxWindowID btn_id, const wxString & label, bool set_focus = false )

inlineinherited

{ add_button(btn_id, set_focus, label); }

References add_button().

Referenced by Slic3r::GUI::PrintOptionsDialog::PrintOptionsDialog(), Slic3r::GUI::wgtDeviceNozzleRackNozzleItem::OnBtnNozzleStatus(), and Slic3r::GUI::wgtDeviceNozzleRackHotendUpdate::OnStatusIconClick().

Here is the call graph for this function:

Here is the caller graph for this function:

appBedType()

BedType Slic3r::GUI::ElegooPrintHostSendDialog::appBedType ( ) const

private

{
    std::string str_bed_type = wxGetApp().app_config->get("curr_bed_type");
    int bed_type_value = atoi(str_bed_type.c_str());
    return static_cast<BedType>(bed_type_value);
}

Referenced by init(), and refresh().

Here is the caller graph for this function:

apply_style()

void Slic3r::GUI::MsgDialog::apply_style ( long style )

protectedinherited

{
    if (style & wxFORWARD)
        add_button(wxFORWARD, true, _L("Go to") + " " + m_forward_str);
    if (style & wxOK) {
        if (style & wxFORWARD) { add_button(wxID_CANCEL, false, _L("Later")); }
        else {
            add_button(wxID_OK, true, _L("OK"));
        }
    }
    if (style & wxYES)      add_button(wxID_YES, true, _L("Yes"));
    if (style & wxNO)       add_button(wxID_NO, false,_L("No"));
    if (style & wxCANCEL)   add_button(wxID_CANCEL, false, _L("Cancel"));
 
    logo->SetBitmap( create_scaled_bitmap(style & wxAPPLY        ? "completed" :
                                          style & wxICON_WARNING        ? "exclamation" : // ORCA "exclamation" used for dialogs "obj_warning" used for 16x16 areas
                                          style & wxICON_INFORMATION    ? "info"        :
                                          style & wxICON_QUESTION       ? "question"    : "OrcaSlicer", this, 64, style & wxICON_ERROR));
}

References _L, add_button(), create_scaled_bitmap(), logo, m_forward_str, and style.

Referenced by MsgDialog().

Here is the call graph for this function:

Here is the caller graph for this function:

bedType()

BedType Slic3r::GUI::ElegooPrintHostSendDialog::bedType ( ) const

inline

{ return m_BedType; }

References m_BedType.

Referenced by init().

Here is the caller graph for this function:

em_unit()

int Slic3r::GUI::DPIAware< wxDialog >::em_unit ( ) const

inlineinherited

{ return m_em_unit; }

Referenced by Slic3r::GUI::AuxiliaryDialog::AuxiliaryDialog(), Slic3r::GUI::CopyrightsDialog::CopyrightsDialog(), Slic3r::GUI::DesignTextDialog::DesignTextDialog(), Slic3r::GUI::EditGCodeDialog::EditGCodeDialog(), Slic3r::GUI::FileArchiveDialog::FileArchiveDialog(), Slic3r::GUI::MsgNoUpdates::MsgNoUpdates(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), Slic3r::GUI::OAuthDialog::OAuthDialog(), Slic3r::GUI::ParamsDialog::ParamsDialog(), Slic3r::GUI::PhysicalPrinterDialog::PhysicalPrinterDialog(), Slic3r::GUI::SettingsDialog::SettingsDialog(), anonymous_namespace{3DPrinterOS.cpp}::TokenAuthDialog::TokenAuthDialog(), anonymous_namespace{3DPrinterOS.cpp}::UploadOptionsDialog::UploadOptionsDialog(), Slic3r::GUI::PublishSettingsDialog::add_row_ui(), Slic3r::GUI::DiffPresetDialog::complete_dialog_creation(), Slic3r::GUI::DiffPresetDialog::create_edit_sizer(), Slic3r::GUI::DiffPresetDialog::create_presets_sizer(), Slic3r::GUI::DiffPresetDialog::create_tree(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), Slic3r::GUI::PrintHostSendDialog::init(), Slic3r::GUI::AboutDialog::on_dpi_changed(), Slic3r::GUI::AuxiliaryDialog::on_dpi_changed(), Slic3r::GUI::BedShapeDialog::on_dpi_changed(), Slic3r::GUI::ConfigWizard::on_dpi_changed(), Slic3r::GUI::CopyrightsDialog::on_dpi_changed(), Slic3r::GUI::DiffPresetDialog::on_dpi_changed(), Slic3r::GUI::EditGCodeDialog::on_dpi_changed(), Slic3r::GUI::FileArchiveDialog::on_dpi_changed(), Slic3r::GUI::OAuthDialog::on_dpi_changed(), Slic3r::GUI::ObjectTableDialog::on_dpi_changed(), Slic3r::GUI::ParamsDialog::on_dpi_changed(), Slic3r::GUI::PhysicalPrinterDialog::on_dpi_changed(), Slic3r::GUI::PrintHostQueueDialog::on_dpi_changed(), Slic3r::GUI::PurgeModeDialog::on_dpi_changed(), Slic3r::GUI::SavePresetDialog::on_dpi_changed(), Slic3r::GUI::SendSystemInfoDialog::on_dpi_changed(), Slic3r::GUI::SettingsDialog::on_dpi_changed(), and Slic3r::GUI::UnsavedChangesDialog::on_dpi_changed().

Here is the caller graph for this function:

enable_force_rescale()

void Slic3r::GUI::DPIAware< wxDialog >::enable_force_rescale ( )

inlineinherited

{ m_force_rescale = true; }

EndModal()

void Slic3r::GUI::ElegooPrintHostSendDialog::EndModal ( int ret )

overridevirtual

Reimplemented from Slic3r::GUI::PrintHostSendDialog.

{
    if (ret == wxID_OK) {
 
        AppConfig* app_config = wxGetApp().app_config;
        app_config->set("recent", CONFIG_KEY_UPLOADANDPRINT, std::to_string(static_cast<int>(post_upload_action)));
        app_config->set("recent", CONFIG_KEY_TIMELAPSE, std::to_string(m_timeLapse));
        app_config->set("recent", CONFIG_KEY_HEATEDBEDLEVELING, std::to_string(m_heatedBedLeveling));
        app_config->set("recent", CONFIG_KEY_BEDTYPE, std::to_string(static_cast<int>(m_BedType)));
    }
 
    PrintHostSendDialog::EndModal(ret);
}

References CONFIG_KEY_BEDTYPE, CONFIG_KEY_HEATEDBEDLEVELING, CONFIG_KEY_TIMELAPSE, CONFIG_KEY_UPLOADANDPRINT, Slic3r::GUI::PrintHostSendDialog::EndModal(), m_BedType, m_heatedBedLeveling, m_timeLapse, Slic3r::GUI::PrintHostSendDialog::post_upload_action, and Slic3r::AppConfig::set().

Here is the call graph for this function:

extendedInfo()

virtual std::map< std::string, std::string > Slic3r::GUI::ElegooPrintHostSendDialog::extendedInfo ( ) const

inlineoverridevirtual

Reimplemented from Slic3r::GUI::PrintHostSendDialog.

    {
        return {{"bedType", std::to_string(static_cast<int>(m_BedType))},
                {"timeLapse", std::to_string(m_timeLapse)},
                {"heatedBedLeveling", std::to_string(m_heatedBedLeveling)}};
    }

References m_BedType, m_heatedBedLeveling, and m_timeLapse.

filename()

fs::path Slic3r::GUI::PrintHostSendDialog::filename ( ) const

inherited

{
    return into_path(txt_filename->GetValue());
}

References Slic3r::GUI::into_path(), and txt_filename.

Referenced by Slic3r::GUI::FlashforgePrintHostSendDialog::init().

Here is the call graph for this function:

Here is the caller graph for this function:

finalize()

void Slic3r::GUI::MsgDialog::finalize ( )

protectedinherited

{
    GetSizer()->SetSizeHints(this);
    Layout();
    Fit();
    CenterOnParent();
    wxGetApp().UpdateDlgDarkUI(this);
}

Referenced by Slic3r::GUI::DownloadDialog::DownloadDialog(), Slic3r::GUI::ErrorDialog::ErrorDialog(), Slic3r::GUI::FilamentWarningDialog::FilamentWarningDialog(), Slic3r::GUI::InfoDialog::InfoDialog(), Slic3r::GUI::MessageDialog::MessageDialog(), Slic3r::GUI::MixedFilamentWarningDialog::MixedFilamentWarningDialog(), Slic3r::GUI::MsgDataIncompatible::MsgDataIncompatible(), Slic3r::GUI::MsgNoUpdates::MsgNoUpdates(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), Slic3r::GUI::MsgUpdateSlic3r::MsgUpdateSlic3r(), Slic3r::GUI::RichMessageDialog::RichMessageDialog(), Slic3r::GUI::WarningDialog::WarningDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and Slic3r::GUI::PrintHostSendDialog::init().

Here is the caller graph for this function:

force_rescale()

bool Slic3r::GUI::DPIAware< wxDialog >::force_rescale ( ) const

inlineinherited

{ return m_force_rescale; }

get_button()

Button * Slic3r::GUI::MsgDialog::get_button ( wxWindowID btn_id )

protectedinherited

                                              {
    return static_cast<Button*>(FindWindowById(btn_id, this));
}

Referenced by Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), and SetButtonLabel().

Here is the caller graph for this function:

get_checkbox_state()

bool Slic3r::GUI::MsgDialog::get_checkbox_state ( )

inherited

{
    if (m_checkbox_dsa) {
        return m_checkbox_dsa->GetValue();
    }
    return false;
}

References m_checkbox_dsa.

Referenced by Slic3r::DevNozzleRack::CheckRackMoveWarningDlg(), Slic3r::GUI::Plater::close_with_confirm(), Slic3r::GUI::confirm_create_decompose_missing_components(), Slic3r::DevNozzleRack::CtrlRackUpgrade(), Slic3r::GUI::ObjectList::layers_editing(), Slic3r::GUI::Plater::priv::load_files(), Slic3r::GUI::Plater::priv::on_action_layersediting(), Slic3r::GUI::MediaPlayCtrl::ToggleStream(), and Slic3r::GUI::ConfigManipulation::update_print_fff_config().

Here is the caller graph for this function:

group()

std::string Slic3r::GUI::PrintHostSendDialog::group ( ) const

inherited

{
     if (combo_groups == nullptr) {
         return "";
     } else {
         wxString group = combo_groups->GetValue();
         return into_u8(group);
    }
}

References combo_groups, group(), and Slic3r::GUI::into_u8().

Referenced by EndModal(), and group().

Here is the call graph for this function:

Here is the caller graph for this function:

heatedBedLeveling()

int Slic3r::GUI::ElegooPrintHostSendDialog::heatedBedLeveling ( ) const

inline

{ return m_heatedBedLeveling; }

References m_heatedBedLeveling.

Referenced by init().

Here is the caller graph for this function:

init()

void Slic3r::GUI::ElegooPrintHostSendDialog::init ( )

overridevirtual

Reimplemented from Slic3r::GUI::PrintHostSendDialog.

                                     {
 
    auto preset_bundle = wxGetApp().preset_bundle;
    auto model_id = preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle);
 
    if (model_id != "Elegoo-CC" && model_id != "Elegoo-C") {
        PrintHostSendDialog::init();
        return;
    }
           
    const auto& path = m_path;
    const auto& storage_paths = m_paths;
    const auto& post_actions  = m_post_actions;
    const auto& storage_names = m_storage_names;
 
    this->SetMinSize(wxSize(500, 300));
    const AppConfig* app_config = wxGetApp().app_config;
 
    std::string uploadAndPrint = app_config->get("recent", CONFIG_KEY_UPLOADANDPRINT);
    if (!uploadAndPrint.empty())
        post_upload_action = static_cast<PrintHostPostUploadAction>(std::stoi(uploadAndPrint));
 
    std::string timeLapse = app_config->get("recent", CONFIG_KEY_TIMELAPSE);
    if (!timeLapse.empty())
        m_timeLapse = std::stoi(timeLapse);
    std::string heatedBedLeveling = app_config->get("recent", CONFIG_KEY_HEATEDBEDLEVELING);
    if (!heatedBedLeveling.empty())
        m_heatedBedLeveling = std::stoi(heatedBedLeveling);
    std::string bedType = app_config->get("recent", CONFIG_KEY_BEDTYPE);
    if (!bedType.empty())
        m_BedType = static_cast<BedType>(std::stoi(bedType));
 
    auto* label_dir_hint = new wxStaticText(this, wxID_ANY, _L("Use forward slashes ( / ) as a directory separator if needed."));
    label_dir_hint->Wrap(CONTENT_WIDTH * wxGetApp().em_unit());
 
    wxSizerFlags flags = wxSizerFlags().Border(wxRIGHT, 16).Expand();
 
    content_sizer->Add(txt_filename, flags);
    content_sizer->AddSpacer(4);
    content_sizer->Add(label_dir_hint);
    content_sizer->AddSpacer(VERT_SPACING);
 
    if (combo_groups != nullptr) {
        // Repetier specific: Show a selection of file groups.
        auto* label_group = new wxStaticText(this, wxID_ANY, _L("Group"));
        content_sizer->Add(label_group);
        content_sizer->Add(combo_groups, 0, wxBOTTOM, 2 * VERT_SPACING);
        wxString recent_group = from_u8(app_config->get("recent", CONFIG_KEY_GROUP));
        if (!recent_group.empty())
            combo_groups->SetValue(recent_group);
    }
 
    if (combo_storage != nullptr) {
        // PrusaLink specific: User needs to choose a storage
        auto* label_group = new wxStaticText(this, wxID_ANY, _L("Upload to storage") + ":");
        content_sizer->Add(label_group);
        content_sizer->Add(combo_storage, 0, wxBOTTOM, 2 * VERT_SPACING);
        combo_storage->SetValue(storage_names.front());
        wxString recent_storage = from_u8(app_config->get("recent", CONFIG_KEY_STORAGE));
        if (!recent_storage.empty())
            combo_storage->SetValue(recent_storage);
    } else if (storage_names.GetCount() == 1) {
        // PrusaLink specific: Show which storage has been detected.
        auto* label_group = new wxStaticText(this, wxID_ANY, _L("Upload to storage") + ": " + storage_names.front());
        content_sizer->Add(label_group);
        m_preselected_storage = m_paths.front();
    }
 
    wxString recent_path = from_u8(app_config->get("recent", CONFIG_KEY_PATH));
    if (recent_path.Length() > 0 && recent_path[recent_path.Length() - 1] != '/') {
        recent_path += '/';
    }
    const auto recent_path_len = recent_path.Length();
    recent_path += path.filename().wstring();
    wxString   stem(path.stem().wstring());
    const auto stem_len = stem.Length();
 
    txt_filename->SetValue(recent_path);
 
    {
        auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
        auto checkbox       = new ::CheckBox(this, wxID_APPLY);
        checkbox->SetValue(m_switch_to_device_tab);
        checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
            m_switch_to_device_tab = e.IsChecked();
            e.Skip();
        });
        checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
 
        auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Switch to Device tab after upload."), wxDefaultPosition, wxDefaultSize, 0);
        checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
        checkbox_text->SetFont(::Label::Body_13);
        checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
        content_sizer->Add(checkbox_sizer);
        content_sizer->AddSpacer(VERT_SPACING);
    }
    warning_text = new wxStaticText(this, wxID_ANY,
                                    _L("The selected bed type does not match the file. Please confirm before starting the print."),
                                    wxDefaultPosition, wxDefaultSize, 0);
    uploadandprint_sizer = new wxBoxSizer(wxVERTICAL);
    {
        auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
        auto checkbox       = new ::CheckBox(this);
        checkbox->SetValue(post_upload_action == PrintHostPostUploadAction::StartPrint);
        checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
            if (e.IsChecked()) {
                post_upload_action = PrintHostPostUploadAction::StartPrint;
            } else {
                post_upload_action = PrintHostPostUploadAction::None;
            }
            refresh();
            e.Skip();
        });
        checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
 
        auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Upload and Print"), wxDefaultPosition, wxDefaultSize, 0);
        checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
        checkbox_text->SetFont(::Label::Body_13);
        checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
        content_sizer->Add(checkbox_sizer);
        content_sizer->AddSpacer(VERT_SPACING);
    }
 
    {
        auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
        auto checkbox       = new ::CheckBox(this);
        checkbox->SetValue(m_timeLapse == 1);
        checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
            m_timeLapse = e.IsChecked() ? 1 : 0;
            e.Skip();
        });
        checkbox_sizer->AddSpacer(16);
        checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
 
        auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Time-lapse"), wxDefaultPosition, wxDefaultSize, 0);
        checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
        checkbox_text->SetFont(::Label::Body_13);
        checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
        uploadandprint_sizer->Add(checkbox_sizer);
        uploadandprint_sizer->AddSpacer(VERT_SPACING);
    }
 
    {
        auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
        auto checkbox       = new ::CheckBox(this);
        checkbox->SetValue(m_heatedBedLeveling == 1);
        checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
            m_heatedBedLeveling = e.IsChecked() ? 1 : 0;
            e.Skip();
        });
        checkbox_sizer->AddSpacer(16);
        checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
 
        auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Heated Bed Leveling"), wxDefaultPosition, wxDefaultSize, 0);
        checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
        checkbox_text->SetFont(::Label::Body_13);
        checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
        uploadandprint_sizer->Add(checkbox_sizer);
        uploadandprint_sizer->AddSpacer(VERT_SPACING);
    }
 
    {
        auto radioBoxA = new RadioBox(this);
        auto radioBoxB = new RadioBox(this);
        if (m_BedType == BedType::btPC)
            radioBoxB->SetValue(true);
        else
            radioBoxA->SetValue(true);
 
        radioBoxA->Bind(wxEVT_LEFT_DOWN, [this, radioBoxA, radioBoxB](wxMouseEvent& e) {
            radioBoxA->SetValue(true);
            radioBoxB->SetValue(false);
            m_BedType = BedType::btPTE;
            refresh();
        });
        radioBoxB->Bind(wxEVT_LEFT_DOWN, [this, radioBoxA, radioBoxB](wxMouseEvent& e) {
            radioBoxA->SetValue(false);
            radioBoxB->SetValue(true);
            m_BedType = BedType::btPC;
            refresh();
        });
 
        {
            auto radio_sizer = new wxBoxSizer(wxHORIZONTAL);
            radio_sizer->AddSpacer(16);
            radio_sizer->Add(radioBoxA, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
 
            auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Textured Build Plate (Side A)"), wxDefaultPosition, wxDefaultSize, 0);
            radio_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
            checkbox_text->SetFont(::Label::Body_13);
            checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
            uploadandprint_sizer->Add(radio_sizer);
            uploadandprint_sizer->AddSpacer(VERT_SPACING);
        }
        {
            auto radio_sizer = new wxBoxSizer(wxHORIZONTAL);
            radio_sizer->AddSpacer(16);
            radio_sizer->Add(radioBoxB, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
 
            auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Smooth Build Plate (Side B)"), wxDefaultPosition, wxDefaultSize, 0);
            radio_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
            checkbox_text->SetFont(::Label::Body_13);
            checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
            uploadandprint_sizer->Add(radio_sizer);
            uploadandprint_sizer->AddSpacer(VERT_SPACING);
        }
    }
    {
        auto h_sizer = new wxBoxSizer(wxHORIZONTAL);
        warning_text->SetFont(::Label::Body_13);
        warning_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#FF1001")));
        // wrapping the text
        warning_text->Wrap(350);
        h_sizer->AddSpacer(16);
        h_sizer->Add(warning_text);
 
        uploadandprint_sizer->Add(h_sizer);
        uploadandprint_sizer->AddSpacer(VERT_SPACING);
    }
 
    content_sizer->Add(uploadandprint_sizer);
    uploadandprint_sizer->Show(post_upload_action == PrintHostPostUploadAction::StartPrint);
    warning_text->Show(post_upload_action == PrintHostPostUploadAction::StartPrint && appBedType() != m_BedType);
 
    uploadandprint_sizer->Layout();
 
    if (size_t extension_start = recent_path.find_last_of('.'); extension_start != std::string::npos)
        m_valid_suffix = recent_path.substr(extension_start);
    // .gcode suffix control
    auto validate_path = [this](const wxString& path) -> bool {
        if (!path.Lower().EndsWith(m_valid_suffix.Lower())) {
            MessageDialog msg_wingow(this,
                                     wxString::Format(_L("Upload filename doesn't end with \"%s\". Do you wish to continue?"),
                                                      m_valid_suffix),
                                     wxString(SLIC3R_APP_NAME), wxYES | wxNO);
            if (msg_wingow.ShowModal() == wxID_NO)
                return false;
        }
        return true;
    };
 
    auto* btn_ok = add_button(wxID_OK, true, _L("Upload"));
    btn_ok->Bind(wxEVT_BUTTON, [this, validate_path](wxCommandEvent&) {
        if (validate_path(txt_filename->GetValue())) {
            // post_upload_action = PrintHostPostUploadAction::None;
            EndDialog(wxID_OK);
        }
    });
    txt_filename->SetFocus();
 
    add_button(wxID_CANCEL, false, _L("Cancel"));
    finalize();
 
#ifdef __linux__
    // On Linux with GTK2 when text control lose the focus then selection (colored background) disappears but text color stay white
    // and as a result the text is invisible with light mode
    // see https://github.com/prusa3d/PrusaSlicer/issues/4532
    // Workaround: Unselect text selection explicitly on kill focus
    txt_filename->Bind(
        wxEVT_KILL_FOCUS,
        [this](wxEvent& e) {
            e.Skip();
            txt_filename->SetInsertionPoint(txt_filename->GetLastPosition());
        },
        txt_filename->GetId());
#endif /* __linux__ */
 
    Bind(wxEVT_SHOW, [=](const wxShowEvent&) {
        // Another similar case where the function only works with EVT_SHOW + CallAfter,
        // this time on Mac.
        CallAfter([=]() {
            txt_filename->SetInsertionPoint(0);
            txt_filename->SetSelection(recent_path_len, recent_path_len + stem_len);
        });
    });
}

References _L, Slic3r::GUI::MsgDialog::add_button(), appBedType(), bedType(), Label::Body_13, Slic3r::btPC, Slic3r::btPTE, Slic3r::GUI::PrintHostSendDialog::combo_groups, Slic3r::GUI::PrintHostSendDialog::combo_storage, CONFIG_KEY_BEDTYPE, Slic3r::GUI::CONFIG_KEY_GROUP, CONFIG_KEY_HEATEDBEDLEVELING, Slic3r::GUI::CONFIG_KEY_PATH, Slic3r::GUI::CONFIG_KEY_STORAGE, CONFIG_KEY_TIMELAPSE, CONFIG_KEY_UPLOADANDPRINT, Slic3r::GUI::MsgDialog::content_sizer, Slic3r::GUI::MsgDialog::CONTENT_WIDTH, StateColor::darkModeColorFor(), Slic3r::GUI::DPIAware< wxDialog >::em_unit(), Slic3r::GUI::MsgDialog::finalize(), Slic3r::GUI::from_u8(), Slic3r::AppConfig::get(), heatedBedLeveling(), Slic3r::GUI::PrintHostSendDialog::init(), m_BedType, m_heatedBedLeveling, Slic3r::GUI::PrintHostSendDialog::m_path, Slic3r::GUI::PrintHostSendDialog::m_paths, Slic3r::GUI::PrintHostSendDialog::m_post_actions, Slic3r::GUI::PrintHostSendDialog::m_preselected_storage, Slic3r::GUI::PrintHostSendDialog::m_storage_names, Slic3r::GUI::PrintHostSendDialog::m_switch_to_device_tab, m_timeLapse, Slic3r::GUI::PrintHostSendDialog::m_valid_suffix, Slic3r::None, Slic3r::GUI::PrintHostSendDialog::post_upload_action, refresh(), Slic3r::GUI::DPIAware< P >::ShowModal(), Slic3r::StartPrint, timeLapse(), Slic3r::GUI::PrintHostSendDialog::txt_filename, uploadandprint_sizer, Slic3r::GUI::MsgDialog::VERT_SPACING, warning_text, Slic3r::GUI::wxMouseEvent, and wxStaticText.

Here is the call graph for this function:

is_new_scale_factor()

bool Slic3r::GUI::DPIAware< wxDialog >::is_new_scale_factor ( ) const

inlineprivateinherited

{ return fabs(m_scale_factor - m_prev_scale_factor) > 0.001; }

normal_font()

const wxFont & Slic3r::GUI::DPIAware< wxDialog >::normal_font ( ) const

inlineinherited

{ return m_normal_font; }

Referenced by Slic3r::GUI::AboutDialog::AboutDialog(), Slic3r::GUI::ConfigWizard::ConfigWizard(), Slic3r::GUI::CopyrightsDialog::CopyrightsDialog(), Slic3r::GUI::EditGCodeDialog::EditGCodeDialog(), Slic3r::GUI::anonymous_namespace{PrintHostDialogs.cpp}::FlashforgeSlotDialog::FlashforgeSlotDialog(), Slic3r::GUI::KBShortcutsDialog::KBShortcutsDialog(), Slic3r::GUI::MsgDialog::MsgDialog(), Slic3r::GUI::OAuthDialog::OAuthDialog(), Slic3r::GUI::PhysicalPrinterDialog::PhysicalPrinterDialog(), Slic3r::GUI::SelectMachineDialog::SelectMachineDialog(), Slic3r::GUI::SendSystemInfoDialog::SendSystemInfoDialog(), Slic3r::GUI::SendToPrinterDialog::SendToPrinterDialog(), Slic3r::GUI::SettingsDialog::SettingsDialog(), Slic3r::GUI::ShortcutCaptureDialog::ShortcutCaptureDialog(), Slic3r::GUI::SyncAmsInfoDialog::SyncAmsInfoDialog(), anonymous_namespace{3DPrinterOS.cpp}::TokenAuthDialog::TokenAuthDialog(), Slic3r::GUI::TroubleshootDialog::TroubleshootDialog(), anonymous_namespace{3DPrinterOS.cpp}::UploadOptionsDialog::UploadOptionsDialog(), Slic3r::GUI::SavePresetDialog::build(), Slic3r::GUI::BedShapeDialog::build_dialog(), and Slic3r::GUI::PhysicalPrinterDialog::build_printhost_settings().

Here is the caller graph for this function:

on_dpi_changed()

void Slic3r::GUI::MsgDialog::on_dpi_changed ( const wxRect & suggested_rect )

virtualinherited

Implements Slic3r::GUI::DPIAware< wxDialog >.

 {
     if (m_buttons.size() > 0) {
         MsgButtonsHash::iterator i = m_buttons.begin();
 
         while (i != m_buttons.end()) {
             MsgButton *bd   = i->second;
             /* ORCA not required since all buttons has same size and Rescale re applies its style
             wxSize     bsize;
 
 
             switch (bd->buttondata->type) {
                case ButtonSizeNormal:bsize = MSG_DIALOG_BUTTON_SIZE;break;
                case ButtonSizeMiddle: bsize = MSG_DIALOG_MIDDLE_BUTTON_SIZE; break;
                case ButtonSizeLong: bsize = MSG_DIALOG_LONG_BUTTON_SIZE; break;
                default: break;
             }
 
             bd->buttondata->button->SetMinSize(bsize);
             */
             bd->buttondata->button->Rescale();
             i++;
         }
     }
 }

References bd, and m_buttons.

on_sys_color_changed()

virtual void Slic3r::GUI::DPIAware< wxDialog >::on_sys_color_changed ( )

inlineprotectedvirtualinherited

Reimplemented in PrintHostQueueDialog, Slic3r::GUI::ColorPickerDialog, Slic3r::GUI::ConfigWizard, Slic3r::GUI::DesignTextDialog, Slic3r::GUI::DiffPresetDialog, Slic3r::GUI::EditGCodeDialog, Slic3r::GUI::MultiMachinePickPage, Slic3r::GUI::ObjectTableDialog, Slic3r::GUI::PhysicalPrinterDialog, Slic3r::GUI::PrintHostQueueDialog, Slic3r::GUI::PublishSettingsDialog, Slic3r::GUI::SavePresetDialog, Slic3r::GUI::SendMultiMachinePage, and Slic3r::GUI::UnsavedChangesDialog.

{};

post_action()

PrintHostPostUploadAction Slic3r::GUI::PrintHostSendDialog::post_action ( ) const

inherited

{
    return post_upload_action;
}

References post_upload_action.

prev_scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::prev_scale_factor ( ) const

inlineinherited

{ return m_prev_scale_factor; }

refresh()

void Slic3r::GUI::ElegooPrintHostSendDialog::refresh ( )

private

{
    if (uploadandprint_sizer) {
        if (post_upload_action == PrintHostPostUploadAction::StartPrint) {
            uploadandprint_sizer->Show(true);
        } else {
            uploadandprint_sizer->Show(false);
        }
    }
    if (warning_text) {
        warning_text->Show(post_upload_action == PrintHostPostUploadAction::StartPrint && appBedType() != m_BedType);
    }
    this->Layout();
    this->Fit();
}

References appBedType(), m_BedType, Slic3r::GUI::PrintHostSendDialog::post_upload_action, Slic3r::StartPrint, uploadandprint_sizer, and warning_text.

Referenced by init().

Here is the call graph for this function:

Here is the caller graph for this function:

rescale()

void Slic3r::GUI::DPIAware< wxDialog >::rescale ( const wxRect & suggested_rect )

inlineprivateinherited

    {
        this->Freeze();
 
        m_force_rescale = false;
 
        // set normal application font as a current window font
        m_normal_font = this->GetFont();
 
        update_em_unit();
 
        // rescale missed controls sizes and images
        on_dpi_changed(suggested_rect);
 
        this->Layout();
        this->Thaw();
 
        // reset previous scale factor from current scale factor value
        m_prev_scale_factor = m_scale_factor;
    }

scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::scale_factor ( ) const

inlineinherited

{ return m_scale_factor; }

set_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::set_em_unit ( int v )

inlineinherited

{ m_em_unit = v; }

set_prev_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_prev_scale_factor ( float v )

inlineinherited

{ m_prev_scale_factor = v; }

set_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_scale_factor ( float v )

inlineinherited

{ m_scale_factor = v; }

SetButtonLabel()

void Slic3r::GUI::MsgDialog::SetButtonLabel ( wxWindowID btn_id, const wxString & label, bool set_focus = false )

inherited

{
    if (Button* btn = get_button(btn_id)) {
        btn->SetLabel(label);
        if (set_focus)
            btn->SetFocus();
    }
}

References get_button().

Referenced by Slic3r::GUI::MixedFilamentWarningDialog::MixedFilamentWarningDialog(), Slic3r::GUI::ConfigManipulation::check_layer_height(), Slic3r::GUI::FanControlNew::check_printing_state(), Slic3r::GUI::FanOperate::check_printing_state(), Slic3r::DevNozzleRack::CtrlRackReadAll(), Slic3r::DevNozzleRack::CtrlRackUpgrade(), Slic3r::GUI::ObjectList::del_from_cut_object(), Slic3r::GUI::Plater::priv::delete_object_from_model(), Slic3r::GUI::Field::get_value_by_opt_type(), Slic3r::GUI::GUI_App::handle_web_request(), Slic3r::GUI::ConfigManipulation::layer_height_out_of_range_dialog(), Slic3r::GUI::Plater::priv::load_files(), Slic3r::GUI::StatusPanel::on_lamp_switch(), Slic3r::GUI::TextureImportDialog::on_mesh_repair_decision_required(), Slic3r::GUI::Tab::on_value_change(), Slic3r::GUI::AMSSettingTypePanel::OnAmsTypeChanged(), Slic3r::GUI::run_scene_benchmark(), Slic3r::GUI::FanControlPopupNew::UpdatePartSubMode(), and Slic3r::GUI::Tab::validate_filament_temperature_pairs().

Here is the call graph for this function:

Here is the caller graph for this function:

show_dsa_button()

void Slic3r::GUI::MsgDialog::show_dsa_button ( wxString const & title = {} )

inherited

{
    m_checkbox_dsa = new CheckBox(this);
    m_dsa_sizer->Add(m_checkbox_dsa, 0, wxALIGN_CENTER);
    m_checkbox_dsa->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
        auto event = wxCommandEvent(EVT_CHECKBOX_CHANGE);
        event.SetInt(m_checkbox_dsa->GetValue()?1:0);
        event.SetEventObject(this);
        wxPostEvent(this, event);
        e.Skip();
    });
 
    auto  m_text_dsa = new wxStaticText(this, wxID_ANY, title.IsEmpty() ? _L("Don't show again") : title, wxDefaultPosition, wxDefaultSize, 0);
    auto on_toggle = [this]() {
        m_checkbox_dsa->SetValue(!m_checkbox_dsa->GetValue());
        wxCommandEvent ev(wxEVT_TOGGLEBUTTON, m_checkbox_dsa->GetId());
        ev.SetEventObject(m_checkbox_dsa);
        m_checkbox_dsa->GetEventHandler()->ProcessEvent(ev);
    };
    m_text_dsa->Bind(wxEVT_LEFT_DOWN,   [on_toggle](wxMouseEvent& e) {if(!e.LeftDClick()) on_toggle();});
    m_text_dsa->Bind(wxEVT_LEFT_DCLICK, [on_toggle](wxMouseEvent& e) {on_toggle();});
 
    m_dsa_sizer->Add(m_text_dsa, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
    m_dsa_sizer->AddSpacer(FromDIP(10)); // spacing after checkbox
    m_text_dsa->SetFont(::Label::Body_13);
    m_text_dsa->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
    btn_sizer->Layout();
    Fit();
}

References _L, Label::Body_13, btn_sizer, StateColor::darkModeColorFor(), m_checkbox_dsa, m_dsa_sizer, Slic3r::GUI::wxMouseEvent, and wxStaticText.

Referenced by Slic3r::DevNozzleRack::CheckRackMoveWarningDlg(), Slic3r::GUI::Plater::close_with_confirm(), Slic3r::GUI::confirm_create_decompose_missing_components(), Slic3r::DevNozzleRack::CtrlRackUpgrade(), Slic3r::GUI::ObjectList::layers_editing(), Slic3r::GUI::Plater::priv::load_files(), Slic3r::GUI::Plater::priv::on_action_layersediting(), Slic3r::GUI::RichMessageDialog::ShowModal(), Slic3r::GUI::MediaPlayCtrl::ToggleStream(), and Slic3r::GUI::ConfigManipulation::update_print_fff_config().

Here is the call graph for this function:

Here is the caller graph for this function:

ShowModal()

int Slic3r::GUI::DPIAware< wxDialog >::ShowModal ( )

inlineinherited

    {
        dialogStack.push_front(this);
        int r = wxDialog::ShowModal();
        dialogStack.pop_front();
        return r;
    }

Referenced by Slic3r::GUI::EditFilamentPresetDialog::delete_preset(), Slic3r::GUI::SingleChoiceDialog::GetSingleChoiceIndex(), Slic3r::GUI::ConfirmBeforeSendDialog::on_show(), Slic3r::GUI::PrivacyUpdateDialog::on_show(), Slic3r::GUI::AMSMaterialsSetting::Popup(), Slic3r::GUI::ExtrusionCalibration::Popup(), Slic3r::GUI::ObjectTableDialog::Popup(), Slic3r::GUI::ConfigWizard::run(), Slic3r::GUI::GuideFrame::run(), Slic3r::GUI::MultiNozzleSyncDialog::ShowModal(), Slic3r::GUI::RichMessageDialog::ShowModal(), Slic3r::GUI::TextureImportDialog::ShowModal(), and Slic3r::GUI::UnsavedChangesDialog::ShowModal().

Here is the caller graph for this function:

storage()

std::string Slic3r::GUI::PrintHostSendDialog::storage ( ) const

inherited

{
    if (!combo_storage)
        return GUI::format("%1%", m_preselected_storage);
    if (combo_storage->GetSelection() < 0 || combo_storage->GetSelection() >= int(m_paths.size()))
        return {};
    return into_u8(m_paths[combo_storage->GetSelection()]);
}

References combo_storage, Slic3r::GUI::format(), Slic3r::GUI::into_u8(), m_paths, and m_preselected_storage.

Referenced by EndModal().

Here is the call graph for this function:

Here is the caller graph for this function:

switch_to_device_tab()

bool Slic3r::GUI::PrintHostSendDialog::switch_to_device_tab ( ) const

inlineinherited

{return m_switch_to_device_tab;}

References m_switch_to_device_tab.

Referenced by Slic3r::GUI::CrealityPrintHostSendDialog::CrealityPrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::ElegooPrintHostSendDialog(), Slic3r::GUI::FlashforgePrintHostSendDialog::FlashforgePrintHostSendDialog(), and PrintHostSendDialog().

Here is the caller graph for this function:

timeLapse()

int Slic3r::GUI::ElegooPrintHostSendDialog::timeLapse ( ) const

inline

{ return m_timeLapse; }

References m_timeLapse.

Referenced by init().

Here is the caller graph for this function:

update_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::update_em_unit ( )

inlineprivateinherited

    {
        // Linux specific issue : get_dpi_for_window(this) still doesn't responce to the Display's scale in new wxWidgets(3.1.3).
        // So, calculate the m_em_unit value from the font size, as before
#if !defined(__WXGTK__)
        m_em_unit = std::max<size_t>(10, 10.0f * m_scale_factor);
#else
        // initialize default width_unit according to the width of the one symbol ("m") of the currently active font of this window.
        m_em_unit = std::max<size_t>(10, this->GetTextExtent("m").x - 1);
#endif // __WXGTK__
    }

Member Data Documentation

boldfont

wxFont Slic3r::GUI::MsgDialog::boldfont

protectedinherited

Referenced by MsgDialog(), and Slic3r::GUI::MsgUpdateForced::MsgUpdateForced().

btn_sizer

wxBoxSizer* Slic3r::GUI::MsgDialog::btn_sizer

protectedinherited

Referenced by MsgDialog(), add_button(), and show_dsa_button().

combo_groups

wxComboBox* Slic3r::GUI::PrintHostSendDialog::combo_groups

protectedinherited

Referenced by PrintHostSendDialog(), EndModal(), group(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), and init().

combo_storage

wxComboBox* Slic3r::GUI::PrintHostSendDialog::combo_storage

protectedinherited

Referenced by PrintHostSendDialog(), EndModal(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), init(), and storage().

CONFIG_KEY_BEDTYPE

const char* Slic3r::GUI::ElegooPrintHostSendDialog::CONFIG_KEY_BEDTYPE = "elegoolink_bed_type"

private

Referenced by EndModal(), and init().

CONFIG_KEY_HEATEDBEDLEVELING

const char* Slic3r::GUI::ElegooPrintHostSendDialog::CONFIG_KEY_HEATEDBEDLEVELING = "elegoolink_heated_bed_leveling"

private

Referenced by EndModal(), and init().

CONFIG_KEY_TIMELAPSE

const char* Slic3r::GUI::ElegooPrintHostSendDialog::CONFIG_KEY_TIMELAPSE = "elegoolink_timelapse"

private

Referenced by EndModal(), and init().

CONFIG_KEY_UPLOADANDPRINT

const char* Slic3r::GUI::ElegooPrintHostSendDialog::CONFIG_KEY_UPLOADANDPRINT = "elegoolink_upload_and_print"

private

Referenced by EndModal(), and init().

content_sizer

wxBoxSizer* Slic3r::GUI::MsgDialog::content_sizer

protectedinherited

Referenced by Slic3r::GUI::ErrorDialog::ErrorDialog(), Slic3r::GUI::InfoDialog::InfoDialog(), Slic3r::GUI::MessageDialog::MessageDialog(), Slic3r::GUI::MixedFilamentWarningDialog::MixedFilamentWarningDialog(), MsgDialog(), Slic3r::GUI::MsgNoUpdates::MsgNoUpdates(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), Slic3r::GUI::RichMessageDialog::RichMessageDialog(), Slic3r::GUI::WarningDialog::WarningDialog(), Slic3r::GUI::FilamentWarningDialog::BuildContent(), Slic3r::GUI::CrealityPrintHostSendDialog::init(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), Slic3r::GUI::PrintHostSendDialog::init(), and Slic3r::GUI::DownloadDialog::SetExtendedMessage().

logo

wxStaticBitmap* Slic3r::GUI::MsgDialog::logo

protectedinherited

Referenced by Slic3r::GUI::ErrorDialog::ErrorDialog(), MsgDialog(), and apply_style().

m_BedType

BedType Slic3r::GUI::ElegooPrintHostSendDialog::m_BedType

private

Referenced by ElegooPrintHostSendDialog(), bedType(), EndModal(), extendedInfo(), init(), and refresh().

m_buttons

MsgButtonsHash Slic3r::GUI::MsgDialog::m_buttons

protectedinherited

Referenced by ~MsgDialog(), add_button(), and on_dpi_changed().

m_can_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_can_rescale

privateinherited

{ true };

m_checkbox_dsa

CheckBox* Slic3r::GUI::MsgDialog::m_checkbox_dsa {nullptr}

protectedinherited

{nullptr};

Referenced by get_checkbox_state(), Slic3r::GUI::RichMessageDialog::IsCheckBoxChecked(), show_dsa_button(), and Slic3r::GUI::RichMessageDialog::ShowModal().

m_dsa_sizer

wxBoxSizer* Slic3r::GUI::MsgDialog::m_dsa_sizer

protectedinherited

Referenced by MsgDialog(), and show_dsa_button().

m_em_unit

int Slic3r::GUI::DPIAware< wxDialog >::m_em_unit

privateinherited

m_force_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_force_rescale

privateinherited

{ false };

m_forward_str

wxString Slic3r::GUI::MsgDialog::m_forward_str

protectedinherited

Referenced by MsgDialog(), and apply_style().

m_heatedBedLeveling

int Slic3r::GUI::ElegooPrintHostSendDialog::m_heatedBedLeveling

private

Referenced by ElegooPrintHostSendDialog(), EndModal(), extendedInfo(), heatedBedLeveling(), and init().

m_new_font_point_size

int Slic3r::GUI::DPIAware< wxDialog >::m_new_font_point_size

privateinherited

m_normal_font

wxFont Slic3r::GUI::DPIAware< wxDialog >::m_normal_font

privateinherited

m_path

boost::filesystem::path Slic3r::GUI::PrintHostSendDialog::m_path

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

m_paths

wxArrayString Slic3r::GUI::PrintHostSendDialog::m_paths

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), init(), and storage().

m_post_actions

PrintHostPostUploadActions Slic3r::GUI::PrintHostSendDialog::m_post_actions

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

m_preselected_storage

wxString Slic3r::GUI::PrintHostSendDialog::m_preselected_storage

protectedinherited

Referenced by Slic3r::GUI::ElegooPrintHostSendDialog::init(), init(), and storage().

m_prev_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_prev_scale_factor

privateinherited

m_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_scale_factor

privateinherited

m_storage_names

wxArrayString Slic3r::GUI::PrintHostSendDialog::m_storage_names

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), and init().

m_switch_to_device_tab

bool Slic3r::GUI::PrintHostSendDialog::m_switch_to_device_tab

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), init(), and switch_to_device_tab().

m_timeLapse

int Slic3r::GUI::ElegooPrintHostSendDialog::m_timeLapse

private

Referenced by ElegooPrintHostSendDialog(), EndModal(), extendedInfo(), init(), and timeLapse().

m_valid_suffix

wxString Slic3r::GUI::PrintHostSendDialog::m_valid_suffix

protectedinherited

Referenced by Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

post_upload_action

PrintHostPostUploadAction Slic3r::GUI::PrintHostSendDialog::post_upload_action

protectedinherited

Referenced by PrintHostSendDialog(), Slic3r::GUI::ElegooPrintHostSendDialog::EndModal(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), init(), post_action(), and Slic3r::GUI::ElegooPrintHostSendDialog::refresh().

txt_filename

wxTextCtrl* Slic3r::GUI::PrintHostSendDialog::txt_filename

protectedinherited

Referenced by PrintHostSendDialog(), EndModal(), filename(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), and init().

uploadandprint_sizer

wxBoxSizer* Slic3r::GUI::ElegooPrintHostSendDialog::uploadandprint_sizer {nullptr}

private

{nullptr};

Referenced by init(), and refresh().

warning_text

wxStaticText* Slic3r::GUI::ElegooPrintHostSendDialog::warning_text {nullptr}

private

{nullptr};

Referenced by init(), and refresh().

---

The documentation for this class was generated from the following files:

• /home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/PrintHostDialogs.hpp
• /home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/PrintHostDialogs.cpp