#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/WebViewDialog.hpp>

Inheritance diagram for Slic3r::GUI::WebViewPanel:

Collaboration diagram for Slic3r::GUI::WebViewPanel:

Public Member Functions
	WebViewPanel (wxWindow *parent)
virtual	~WebViewPanel ()
void	load_url (wxString &url)
void	UpdateState ()
void	OnIdle (wxIdleEvent &evt)
void	OnUrl (wxCommandEvent &evt)
void	OnBack (wxCommandEvent &evt)
void	OnForward (wxCommandEvent &evt)
void	OnStop (wxCommandEvent &evt)
void	OnReload (wxCommandEvent &evt)
void	OnNavigationRequest (wxWebViewEvent &evt)
void	OnNavigationComplete (wxWebViewEvent &evt)
void	OnDocumentLoaded (wxWebViewEvent &evt)
void	OnTitleChanged (wxWebViewEvent &evt)
void	OnNewWindow (wxWebViewEvent &evt)
void	OnScriptMessage (wxWebViewEvent &evt)
void	OnScriptResponseMessage (wxCommandEvent &evt)
void	OnViewSourceRequest (wxCommandEvent &evt)
void	OnViewTextRequest (wxCommandEvent &evt)
void	OnToolsClicked (wxCommandEvent &evt)
void	OnError (wxWebViewEvent &evt)
void	OnCut (wxCommandEvent &evt)
void	OnCopy (wxCommandEvent &evt)
void	OnPaste (wxCommandEvent &evt)
void	OnUndo (wxCommandEvent &evt)
void	OnRedo (wxCommandEvent &evt)
void	OnMode (wxCommandEvent &evt)
void	RunScript (const wxString &javascript)
void	OnRunScriptString (wxCommandEvent &evt)
void	OnRunScriptInteger (wxCommandEvent &evt)
void	OnRunScriptDouble (wxCommandEvent &evt)
void	OnRunScriptBool (wxCommandEvent &evt)
void	OnRunScriptObject (wxCommandEvent &evt)
void	OnRunScriptArray (wxCommandEvent &evt)
void	OnRunScriptDOM (wxCommandEvent &evt)
void	OnRunScriptUndefined (wxCommandEvent &evt)
void	OnRunScriptNull (wxCommandEvent &evt)
void	OnRunScriptDate (wxCommandEvent &evt)
void	OnRunScriptMessage (wxCommandEvent &evt)
void	OnRunScriptCustom (wxCommandEvent &evt)
void	OnAddUserScript (wxCommandEvent &evt)
void	OnSetCustomUserAgent (wxCommandEvent &evt)
void	OnClearSelection (wxCommandEvent &evt)
void	OnDeleteSelection (wxCommandEvent &evt)
void	OnSelectAll (wxCommandEvent &evt)
void	OnLoadScheme (wxCommandEvent &evt)
void	OnUseMemoryFS (wxCommandEvent &evt)
void	OnEnableContextMenu (wxCommandEvent &evt)
void	OnEnableDevTools (wxCommandEvent &evt)
void	OnClose (wxCloseEvent &evt)
void	OnFreshLoginStatus (wxTimerEvent &event)
void	SendRecentList (int images)
void	SetLoginPanelVisibility (bool bshow)
void	SendDesignStaffpick (bool on)
void	OpenModelDetail (std::string id, NetworkAgent *agent)
void	SendLoginInfo ()
void	ShowNetpluginTip ()
void	SendCloudProvidersInfo ()
void	get_design_staffpick (int offset, int limit, std::function< void(std::string)> callback)
int	get_model_mall_detail_url (std::string *url, std::string id)
void	update_mode ()
void	set_cloud_mode (bool on, const wxString &url=wxString(), const wxString &page_url=wxString())
bool	cloud_mode_active () const
void	load_cloud_url (const wxString &url)
void	cloud_signed_out (const wxString &signout_url)
bool	Show (bool show=true) override

Static Public Member Functions
static WebViewPanel *	if_built ()
static WebViewPanel *	ensure ()
static void	when_built (std::function< void(WebViewPanel &)> fn)

Public Attributes
wxTimer *	m_LoginUpdateTimer {nullptr}

Private Member Functions
void	create_browser ()
void	create_cloud_browser ()
void	reset_browser ()
void	OnCloudWebViewEvent (wxWebViewEvent &evt)
bool	is_cloud_origin (const wxString &url) const
bool	should_divert_cloud_url (const wxString &url) const
void	on_cloud_script_message (const std::string &body)
void	load_cloud_after_signout (const wxString &url)
void	schedule_cloud_load (const wxString &url)
void	clear_cloud_storage ()
void	apply_cloud_layout (bool cloud_on)

Private Attributes
wxWebView *	m_browser
wxWebView *	m_cloud_browser {nullptr}
wxBoxSizer *	m_content_sizer {nullptr}
wxString	m_home_url
bool	m_reset_on_show {false}
wxString	m_cloud_base_url
wxString	m_cloud_seed_url
wxString	m_cloud_signout_url
wxString	m_cloud_after_signout_url
bool	m_cloud_pending_signout {false}
wxButton *	m_button_stop
wxTextCtrl *	m_url
wxBoxSizer *	bSizer_toolbar
wxButton *	m_button_back
wxButton *	m_button_forward
wxButton *	m_button_reload
wxButton *	m_button_tools
wxMenu *	m_tools_menu
wxMenuItem *	m_tools_handle_navigation
wxMenuItem *	m_tools_handle_new_window
wxMenuItem *	m_edit_cut
wxMenuItem *	m_edit_copy
wxMenuItem *	m_edit_paste
wxMenuItem *	m_edit_undo
wxMenuItem *	m_edit_redo
wxMenuItem *	m_edit_mode
wxMenuItem *	m_script_string
wxMenuItem *	m_script_integer
wxMenuItem *	m_script_double
wxMenuItem *	m_script_bool
wxMenuItem *	m_script_object
wxMenuItem *	m_script_array
wxMenuItem *	m_script_dom
wxMenuItem *	m_script_undefined
wxMenuItem *	m_script_null
wxMenuItem *	m_script_date
wxMenuItem *	m_script_message
wxMenuItem *	m_script_custom
wxMenuItem *	m_selection_clear
wxMenuItem *	m_selection_delete
wxMenuItem *	m_context_menu
wxMenuItem *	m_dev_tools
wxInfoBar *	m_info
long	m_zoomFactor
wxString	m_javascript
wxString	m_response_js

Static Private Attributes
static Lazy< WebViewPanel > *	s_lazy

Detailed Description

Constructor & Destructor Documentation

◆ WebViewPanel()

Slic3r::GUI::WebViewPanel::WebViewPanel ( wxWindow * parent )

        : wxPanel(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize)
 {
    m_home_url = file_url_from_path(boost::filesystem::path(resources_dir()) / "web/homepage/index.html");
    wxString strlang = wxGetApp().current_language_code_safe();
    if (strlang != "")
        m_home_url += "?lang=" + strlang;
 
    wxBoxSizer* topsizer = new wxBoxSizer(wxVERTICAL);
    
#if !BBL_RELEASE_TO_PUBLIC
    // Create the button
    bSizer_toolbar = new wxBoxSizer(wxHORIZONTAL);
 
    m_button_back = new wxButton(this, wxID_ANY, _L_CONTEXT("Back", "Navigation"), wxDefaultPosition, wxDefaultSize, 0);
    m_button_back->Enable(false);
    bSizer_toolbar->Add(m_button_back, 0, wxALL, 5);
 
    m_button_forward = new wxButton(this, wxID_ANY, _L("Forward"), wxDefaultPosition, wxDefaultSize, 0);
    m_button_forward->Enable(false);
    bSizer_toolbar->Add(m_button_forward, 0, wxALL, 5);
 
    m_button_stop = new wxButton(this, wxID_ANY, _L("Stop"), wxDefaultPosition, wxDefaultSize, 0);
 
    bSizer_toolbar->Add(m_button_stop, 0, wxALL, 5);
 
    m_button_reload = new wxButton(this, wxID_ANY, _L("Reload"), wxDefaultPosition, wxDefaultSize, 0);
    bSizer_toolbar->Add(m_button_reload, 0, wxALL, 5);
 
    m_url = new wxTextCtrl(this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER);
    bSizer_toolbar->Add(m_url, 1, wxALL | wxEXPAND, 5);
 
    m_button_tools = new wxButton(this, wxID_ANY, _L("Tools"), wxDefaultPosition, wxDefaultSize, 0);
    bSizer_toolbar->Add(m_button_tools, 0, wxALL, 5);
 
    topsizer->Add(bSizer_toolbar, 0, wxEXPAND, 0);
    bSizer_toolbar->Show(false);
 
    // Create panel for find toolbar.
    wxPanel* panel = new wxPanel(this);
    topsizer->Add(panel, wxSizerFlags().Expand());
 
    // Create sizer for panel.
    wxBoxSizer* panel_sizer = new wxBoxSizer(wxVERTICAL);
    panel->SetSizer(panel_sizer);
#endif //BBL_RELEASE_TO_PUBLIC
    // Create the info panel
    m_info = new wxInfoBar(this);
    topsizer->Add(m_info, wxSizerFlags().Expand());
    // Create the webview
    create_browser();
    m_reset_on_show = WebView::NeedsRecreateOnShow();
    SetSizer(topsizer);
 
    // The homepage shell is the left nav column; when OrcaCloud opens, its page lives in a
    // second native pane beside it (the site refuses to be framed).
    m_content_sizer = new wxBoxSizer(wxHORIZONTAL);
    m_content_sizer->Add(m_browser, wxSizerFlags().Expand().Proportion(1));
    topsizer->Add(m_content_sizer, wxSizerFlags().Expand().Proportion(1));
 
    // Log backend information
    /* m_browser->GetUserAgent() may lead crash
    if (wxGetApp().get_mode() == comDevelop) {
        wxLogMessage(wxWebView::GetBackendVersionInfo().ToString());
        wxLogMessage("Backend: %s Version: %s", m_browser->GetClassInfo()->GetClassName(),
            wxWebView::GetBackendVersionInfo().ToString());
        wxLogMessage("User Agent: %s", m_browser->GetUserAgent());
    }
    */
 
    // Create the Tools menu
    m_tools_menu = new wxMenu();
    wxMenuItem* viewSource = m_tools_menu->Append(wxID_ANY, _L("View Source"));
    wxMenuItem* viewText = m_tools_menu->Append(wxID_ANY, _L("View Text"));
    m_tools_menu->AppendSeparator();
    m_tools_handle_navigation = m_tools_menu->AppendCheckItem(wxID_ANY, _L("Handle Navigation"));
    m_tools_handle_new_window = m_tools_menu->AppendCheckItem(wxID_ANY, _L("Handle New Windows"));
    m_tools_menu->AppendSeparator();
 
    //Create an editing menu
    wxMenu* editmenu = new wxMenu();
    m_edit_cut = editmenu->Append(wxID_ANY, _L("Cut"));
    m_edit_copy = editmenu->Append(wxID_ANY, _L("Copy"));
    m_edit_paste = editmenu->Append(wxID_ANY, _L("Paste"));
    editmenu->AppendSeparator();
    m_edit_undo = editmenu->Append(wxID_ANY, _L("Undo"));
    m_edit_redo = editmenu->Append(wxID_ANY, _L("Redo"));
    editmenu->AppendSeparator();
    m_edit_mode = editmenu->AppendCheckItem(wxID_ANY, _L("Edit Mode"));
    m_tools_menu->AppendSubMenu(editmenu, "Edit");
 
    wxMenu* script_menu = new wxMenu;
    m_script_string = script_menu->Append(wxID_ANY, "Return String");
    m_script_integer = script_menu->Append(wxID_ANY, "Return integer");
    m_script_double = script_menu->Append(wxID_ANY, "Return double");
    m_script_bool = script_menu->Append(wxID_ANY, "Return bool");
    m_script_object = script_menu->Append(wxID_ANY, "Return JSON object");
    m_script_array = script_menu->Append(wxID_ANY, "Return array");
    m_script_dom = script_menu->Append(wxID_ANY, "Modify DOM");
    m_script_undefined = script_menu->Append(wxID_ANY, "Return undefined");
    m_script_null = script_menu->Append(wxID_ANY, "Return null");
    m_script_date = script_menu->Append(wxID_ANY, "Return Date");
    m_script_message = script_menu->Append(wxID_ANY, "Send script message");
    m_script_custom = script_menu->Append(wxID_ANY, "Custom script");
    m_tools_menu->AppendSubMenu(script_menu, _L("Run Script"));
    wxMenuItem* addUserScript = m_tools_menu->Append(wxID_ANY, _L("Add user script"));
    wxMenuItem* setCustomUserAgent = m_tools_menu->Append(wxID_ANY, _L("Set custom user agent"));
 
    //Selection menu
    wxMenu* selection = new wxMenu();
    m_selection_clear = selection->Append(wxID_ANY, _L("Clear Selection"));
    m_selection_delete = selection->Append(wxID_ANY, _L("Delete Selection"));
    wxMenuItem* selectall = selection->Append(wxID_ANY, _L("Select All"));
 
    editmenu->AppendSubMenu(selection, "Selection");
 
    wxMenuItem* loadscheme = m_tools_menu->Append(wxID_ANY, _L("Custom Scheme Example"));
    wxMenuItem* usememoryfs = m_tools_menu->Append(wxID_ANY, _L("Memory File System Example"));
 
    m_context_menu = m_tools_menu->AppendCheckItem(wxID_ANY, _L("Enable Context Menu"));
    m_dev_tools = m_tools_menu->AppendCheckItem(wxID_ANY, _L("Enable Dev Tools"));
 
    //By default we want to handle navigation and new windows
    m_tools_handle_navigation->Check();
    m_tools_handle_new_window->Check();
 
    //Zoom
    m_zoomFactor = 100;
 
    // Connect the button events
#if !BBL_RELEASE_TO_PUBLIC
    Bind(wxEVT_BUTTON, &WebViewPanel::OnBack, this, m_button_back->GetId());
    Bind(wxEVT_BUTTON, &WebViewPanel::OnForward, this, m_button_forward->GetId());
    Bind(wxEVT_BUTTON, &WebViewPanel::OnStop, this, m_button_stop->GetId());
    Bind(wxEVT_BUTTON, &WebViewPanel::OnReload, this, m_button_reload->GetId());
    Bind(wxEVT_BUTTON, &WebViewPanel::OnToolsClicked, this, m_button_tools->GetId());
    Bind(wxEVT_TEXT_ENTER, &WebViewPanel::OnUrl, this, m_url->GetId());
 
#endif //BBL_RELEASE_TO_PUBLIC
 
    // Connect the webview events
    Bind(wxEVT_WEBVIEW_NAVIGATING, &WebViewPanel::OnNavigationRequest, this);
    Bind(wxEVT_WEBVIEW_NAVIGATED, &WebViewPanel::OnNavigationComplete, this);
    Bind(wxEVT_WEBVIEW_LOADED, &WebViewPanel::OnDocumentLoaded, this);
    Bind(wxEVT_WEBVIEW_TITLE_CHANGED, &WebViewPanel::OnTitleChanged, this);
    Bind(wxEVT_WEBVIEW_ERROR, &WebViewPanel::OnError, this);
    Bind(wxEVT_WEBVIEW_NEWWINDOW, &WebViewPanel::OnNewWindow, this);
    Bind(wxEVT_WEBVIEW_SCRIPT_MESSAGE_RECEIVED, &WebViewPanel::OnScriptMessage, this);
    Bind(EVT_RESPONSE_MESSAGE, &WebViewPanel::OnScriptResponseMessage, this);
 
    // Connect the menu events
    Bind(wxEVT_MENU, &WebViewPanel::OnViewSourceRequest, this, viewSource->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnViewTextRequest, this, viewText->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnCut, this, m_edit_cut->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnCopy, this, m_edit_copy->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnPaste, this, m_edit_paste->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnUndo, this, m_edit_undo->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRedo, this, m_edit_redo->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnMode, this, m_edit_mode->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptString, this, m_script_string->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptInteger, this, m_script_integer->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptDouble, this, m_script_double->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptBool, this, m_script_bool->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptObject, this, m_script_object->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptArray, this, m_script_array->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptDOM, this, m_script_dom->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptUndefined, this, m_script_undefined->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptNull, this, m_script_null->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptDate, this, m_script_date->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptMessage, this, m_script_message->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnRunScriptCustom, this, m_script_custom->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnAddUserScript, this, addUserScript->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnSetCustomUserAgent, this, setCustomUserAgent->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnClearSelection, this, m_selection_clear->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnDeleteSelection, this, m_selection_delete->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnSelectAll, this, selectall->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnLoadScheme, this, loadscheme->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnUseMemoryFS, this, usememoryfs->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnEnableContextMenu, this, m_context_menu->GetId());
    Bind(wxEVT_MENU, &WebViewPanel::OnEnableDevTools, this, m_dev_tools->GetId());
 
    //Connect the idle events
    Bind(wxEVT_IDLE, &WebViewPanel::OnIdle, this);
    Bind(wxEVT_CLOSE_WINDOW, &WebViewPanel::OnClose, this);
 
    m_LoginUpdateTimer = nullptr;
    update_mode();
 }

References WebViewPanel(), _L, _L_CONTEXT, bSizer_toolbar, create_browser(), Slic3r::GUI::file_url_from_path(), m_browser, m_button_back, m_button_forward, m_button_reload, m_button_stop, m_button_tools, m_content_sizer, m_context_menu, m_dev_tools, m_edit_copy, m_edit_cut, m_edit_mode, m_edit_paste, m_edit_redo, m_edit_undo, m_home_url, m_info, m_LoginUpdateTimer, m_reset_on_show, m_script_array, m_script_bool, m_script_custom, m_script_date, m_script_dom, m_script_double, m_script_integer, m_script_message, m_script_null, m_script_object, m_script_string, m_script_undefined, m_selection_clear, m_selection_delete, m_tools_handle_navigation, m_tools_handle_new_window, m_tools_menu, m_url, m_zoomFactor, WebView::NeedsRecreateOnShow(), OnAddUserScript(), OnBack(), OnClearSelection(), OnClose(), OnCopy(), OnCut(), OnDeleteSelection(), OnDocumentLoaded(), OnEnableContextMenu(), OnEnableDevTools(), OnError(), OnForward(), OnIdle(), OnLoadScheme(), OnMode(), OnNavigationComplete(), OnNavigationRequest(), OnNewWindow(), OnPaste(), OnRedo(), OnReload(), OnRunScriptArray(), OnRunScriptBool(), OnRunScriptCustom(), OnRunScriptDate(), OnRunScriptDOM(), OnRunScriptDouble(), OnRunScriptInteger(), OnRunScriptMessage(), OnRunScriptNull(), OnRunScriptObject(), OnRunScriptString(), OnRunScriptUndefined(), OnScriptMessage(), OnScriptResponseMessage(), OnSelectAll(), OnSetCustomUserAgent(), OnStop(), OnTitleChanged(), OnToolsClicked(), OnUndo(), OnUrl(), OnUseMemoryFS(), OnViewSourceRequest(), OnViewTextRequest(), Slic3r::resources_dir(), update_mode(), and wxButton.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ ~WebViewPanel()

Slic3r::GUI::WebViewPanel::~WebViewPanel ( )

virtual

{
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << " Start";
    SetEvtHandlerEnabled(false);
    
    delete m_tools_menu;
 
    if (m_LoginUpdateTimer != nullptr) {
        m_LoginUpdateTimer->Stop();
        delete m_LoginUpdateTimer;
        m_LoginUpdateTimer = NULL;
    }
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << " End";
}

References m_LoginUpdateTimer, m_tools_menu, and Slic3r::trace().

Here is the call graph for this function:

Member Function Documentation

◆ apply_cloud_layout()

void Slic3r::GUI::WebViewPanel::apply_cloud_layout ( bool cloud_on )

private

{
    if (!m_content_sizer)
        return;
 
    // Cloud mode pins the homepage to the nav column width; otherwise it fills the panel.
    if (m_browser) {
        if (wxSizerItem* item = m_content_sizer->GetItem(m_browser))
            item->SetProportion(cloud_on ? 0 : 1);
        // kLeftNavWidth is in DIP: the web view's CSS px are DIP, so scale to physical pixels.
        m_browser->SetMinSize(cloud_on ? m_browser->FromDIP(wxSize(kLeftNavWidth, -1)) : wxDefaultSize);
    }
    Layout();
}

References Slic3r::GUI::kLeftNavWidth, m_browser, and m_content_sizer.

Referenced by reset_browser(), and set_cloud_mode().

Here is the caller graph for this function:

◆ clear_cloud_storage()

void Slic3r::GUI::WebViewPanel::clear_cloud_storage ( )

private

{
    if (m_cloud_browser)
        m_cloud_browser->ClearBrowsingData(wxWEBVIEW_BROWSING_DATA_ALL);
}

References m_cloud_browser.

Referenced by cloud_signed_out(), and load_cloud_after_signout().

Here is the caller graph for this function:

◆ cloud_mode_active()

bool Slic3r::GUI::WebViewPanel::cloud_mode_active ( ) const

inline

127{ return m_cloud_browser && m_cloud_browser->IsShown(); }

References m_cloud_browser.

◆ cloud_signed_out()

void Slic3r::GUI::WebViewPanel::cloud_signed_out ( const wxString & signout_url )

{
    if (signout_url.empty())
        return;
    m_cloud_signout_url = signout_url;
    // The next Start URL must re-seed the pane (it now reflects the signed-out state), so forget
    // the previous seed regardless of which branch below runs.
    m_cloud_seed_url.clear();
    if (m_cloud_browser) {
        m_cloud_pending_signout = false;
        // Run the sign-out page (ends the server-side session), then clear the pane's stored data.
        load_cloud_url(signout_url);
        clear_cloud_storage();
    } else {
        // Pane never opened this run: clear the persisted session on its first open.
        m_cloud_pending_signout = true;
    }
}

References clear_cloud_storage(), load_cloud_url(), m_cloud_browser, m_cloud_pending_signout, m_cloud_seed_url, and m_cloud_signout_url.

Here is the call graph for this function:

◆ create_browser()

void Slic3r::GUI::WebViewPanel::create_browser ( )

private

{
    // Created empty and loaded after the strings are added, so the first load already has them.
    m_browser = WebView::CreateWebView(this, wxEmptyString);
    m_browser->AddUserScript(wxString::FromUTF8(WebViewHostDialog::localized_strings_script(home_page_strings())));
    WebView::LoadUrl(m_browser, m_home_url);
    m_browser->Hide();
}

References WebView::CreateWebView(), Slic3r::GUI::home_page_strings(), WebView::LoadUrl(), Slic3r::GUI::WebViewHostDialog::localized_strings_script(), m_browser, and m_home_url.

Referenced by WebViewPanel(), and reset_browser().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ create_cloud_browser()

void Slic3r::GUI::WebViewPanel::create_cloud_browser ( )

private

{
    m_cloud_browser = WebView::CreateWebView(this, wxEmptyString);
 
#ifdef __linux__
    // The pane's web session is a cookie (guide §3), and WebKitGTK keeps cookies only in memory
    // unless a persistent store is set up, so without this the sign-in is lost on every restart
    // (and on every reset_browser). Each wxWebView has its own context, so give the cloud pane its
    // own store instead of sharing PrinterWebView's. Mirrors PrinterWebView::create_browser.
    if (auto* wv = static_cast<WebKitWebView*>(m_cloud_browser->GetNativeBackend())) {
        const auto cookies_path = boost::filesystem::path(data_dir() + "/cache/cloud_cookies.db");
        auto*      cookie_manager = webkit_web_context_get_cookie_manager(webkit_web_view_get_context(wv));
        webkit_cookie_manager_set_persistent_storage(cookie_manager, cookies_path.c_str(),
                                                     WEBKIT_COOKIE_PERSISTENT_STORAGE_SQLITE);
    }
#endif
 
    // Webview events are command events, so they would otherwise propagate up to the
    // panel's handlers, which drive the homepage view. Keep the cloud pane's events here.
    m_cloud_browser->Bind(wxEVT_WEBVIEW_NAVIGATING, &WebViewPanel::OnCloudWebViewEvent, this);
    m_cloud_browser->Bind(wxEVT_WEBVIEW_NAVIGATED, &WebViewPanel::OnCloudWebViewEvent, this);
    m_cloud_browser->Bind(wxEVT_WEBVIEW_LOADED, &WebViewPanel::OnCloudWebViewEvent, this);
    m_cloud_browser->Bind(wxEVT_WEBVIEW_TITLE_CHANGED, &WebViewPanel::OnCloudWebViewEvent, this);
    m_cloud_browser->Bind(wxEVT_WEBVIEW_ERROR, &WebViewPanel::OnCloudWebViewEvent, this);
    m_cloud_browser->Bind(wxEVT_WEBVIEW_NEWWINDOW, &WebViewPanel::OnCloudWebViewEvent, this);
    m_cloud_browser->Bind(wxEVT_WEBVIEW_SCRIPT_MESSAGE_RECEIVED, &WebViewPanel::OnCloudWebViewEvent, this);
 
    m_cloud_browser->Hide();
    if (m_content_sizer)
        m_content_sizer->Add(m_cloud_browser, wxSizerFlags().Expand().Proportion(1));
}

References WebView::CreateWebView(), Slic3r::data_dir(), m_cloud_browser, m_content_sizer, and OnCloudWebViewEvent().

Referenced by reset_browser(), and set_cloud_mode().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ensure()

WebViewPanel * Slic3r::GUI::LazyInstance< WebViewPanel >::ensure ( )

inlinestaticinherited

186{ return s_lazy ? s_lazy->ensure() : nullptr; }

Slic3r::GUI::LazyInstance

Definition Lazy.hpp:180

Slic3r::GUI::LazyInstance::ensure

static Self * ensure()

Definition Lazy.hpp:186

Referenced by Slic3r::GUI::MainFrame::init_tabpanel(), and Slic3r::GUI::GUI_App::open_orca_cloud().

Here is the caller graph for this function:

◆ get_design_staffpick()

void Slic3r::GUI::WebViewPanel::get_design_staffpick	(	int	offset,
		int	limit,
		std::function< void(std::string)>	callback )

{
    // auto host = wxGetApp().get_http_url(wxGetApp().app_config->get_country_code(), "v1/design-service/design/staffpick");
    // std::string url = (boost::format("%1%/?offset=%2%&limit=%3%") % host % offset % limit).str();
 
    // Http http = Http::get(url);
    // http.header("accept", "application/json")
    //     .header("Content-Type", "application/json")
    //     .on_complete([this, callback](std::string body, unsigned status) { callback(body); })
    //     .on_error([this, callback](std::string body, std::string error, unsigned status) {
    //         callback(body);
    //     })
    //     .perform();
}

References Slic3r::offset().

Here is the call graph for this function:

◆ get_model_mall_detail_url()

int Slic3r::GUI::WebViewPanel::get_model_mall_detail_url	(	std::string *	url,
		std::string	id )

{
    // https://makerhub-qa.bambu-lab.com/en/models/2077
    std::string h = wxGetApp().get_model_http_url(wxGetApp().app_config->get_country_code());
    auto l = wxGetApp().current_language_code_safe();
    if (auto n = l.find('_'); n != std::string::npos)
        l = l.substr(0, n);
    *url = (boost::format("%1%%2%/models/%3%") % h % l % id).str();
    return 0;
}

Referenced by OpenModelDetail().

Here is the caller graph for this function:

◆ if_built()

WebViewPanel * Slic3r::GUI::LazyInstance< WebViewPanel >::if_built ( )

inlinestaticinherited

183{ return s_lazy ? s_lazy->get() : nullptr; }

Here is the caller graph for this function:

◆ is_cloud_origin()

bool Slic3r::GUI::WebViewPanel::is_cloud_origin ( const wxString & url ) const

private

{
    const wxString origin = http_origin_of(url);
    return !origin.IsEmpty() && !m_cloud_base_url.IsEmpty() && origin == m_cloud_base_url;
}

References Slic3r::GUI::http_origin_of(), and m_cloud_base_url.

Referenced by OnCloudWebViewEvent().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ load_cloud_after_signout()

void Slic3r::GUI::WebViewPanel::load_cloud_after_signout ( const wxString & url )

private

{
    if (m_cloud_pending_signout && !m_cloud_signout_url.IsEmpty()) {
        // The pane did not exist when the user signed out, so its persisted session must be
        // cleared before the sign-out page runs and `url` loads once that navigation finishes
        // (see OnCloudWebViewEvent).
        m_cloud_pending_signout    = false;
        m_cloud_after_signout_url  = url;
        clear_cloud_storage();
        load_cloud_url(m_cloud_signout_url);
        return;
    }
    load_cloud_url(url);
}

References clear_cloud_storage(), load_cloud_url(), m_cloud_after_signout_url, m_cloud_pending_signout, and m_cloud_signout_url.

Referenced by schedule_cloud_load(), and set_cloud_mode().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ load_cloud_url()

void Slic3r::GUI::WebViewPanel::load_cloud_url ( const wxString & url )

{
    if (url.empty())
        return;
    // Track the origin of whatever the pane is told to load (Start URL, Complete URL, sign-out or
    // the plain cloud fallback), so navigation policy has the right origin from the first load on.
    const wxString origin = http_origin_of(url);
    if (!origin.IsEmpty())
        m_cloud_base_url = origin;
    if (!m_cloud_browser)
        return;
    // Raw LoadURL: WebView::LoadUrl re-serialises through wxURI, which must not alter the
    // fragment that carries the one-time handoff token. Log only the redacted URL.
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << WebView::RedactUrl(url).ToUTF8().data();
    m_cloud_browser->LoadURL(url);
}

References Slic3r::GUI::http_origin_of(), m_cloud_base_url, m_cloud_browser, WebView::RedactUrl(), and Slic3r::trace().

Referenced by cloud_signed_out(), load_cloud_after_signout(), OnCloudWebViewEvent(), and set_cloud_mode().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ load_url()

void Slic3r::GUI::WebViewPanel::load_url ( wxString & url )

{
    this->Show();
    this->Raise();
    m_url->ChangeValue(url);
 
    if (wxGetApp().get_mode() == comDevelop)
        wxLogMessage(m_url->GetValue());
    m_browser->LoadURL(url);
    m_browser->SetFocus();
    UpdateState();
}

References Slic3r::comDevelop, m_browser, m_url, Show(), and UpdateState().

Referenced by Slic3r::GUI::MainFrame::init_tabpanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ on_cloud_script_message()

void Slic3r::GUI::WebViewPanel::on_cloud_script_message ( const std::string & body )

private

{
    const json msg = json::parse(body, nullptr, false);
    if (msg.is_discarded() || !msg.is_object() || msg.value("command", std::string()) != "request_web_session")
        return;
 
    std::string state;
    if (msg.contains("data") && msg["data"].is_object())
        state = msg["data"].value("state", std::string());
    if (state.empty())
        return;
 
    wxGetApp().CallAfter([state = std::move(state)] { wxGetApp().request_cloud_web_session(state); });
}

Referenced by OnCloudWebViewEvent().

Here is the caller graph for this function:

◆ OnAddUserScript()

void Slic3r::GUI::WebViewPanel::OnAddUserScript ( wxCommandEvent & evt )

{
    wxString userScript = "window.wx_test_var = 'wxWidgets webview sample';";
    wxTextEntryDialog dialog
    (
        this,
        "Enter the JavaScript code to run as the initialization script that runs before any script in the HTML document.",
        wxGetTextFromUserPromptStr,
        userScript,
        wxOK | wxCANCEL | wxCENTRE | wxTE_MULTILINE
    );
    if (dialog.ShowModal() != wxID_OK)
        return;
 
    if (!m_browser->AddUserScript(dialog.GetValue()))
        wxLogError("Could not add user script");
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnBack()

void Slic3r::GUI::WebViewPanel::OnBack ( wxCommandEvent & evt )

Callback invoked when user pressed the "back" button

{
    m_browser->GoBack();
    UpdateState();
}

References m_browser, and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnClearSelection()

void Slic3r::GUI::WebViewPanel::OnClearSelection ( wxCommandEvent & evt )

{
    m_browser->ClearSelection();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnClose()

void Slic3r::GUI::WebViewPanel::OnClose ( wxCloseEvent & evt )

{
    this->Hide();
}

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnCloudWebViewEvent()

void Slic3r::GUI::WebViewPanel::OnCloudWebViewEvent ( wxWebViewEvent & evt )

private

{
    const wxEventType event_type = evt.GetEventType();
    if (event_type == wxEVT_WEBVIEW_NAVIGATING) {
        const wxString url = evt.GetURL();
        // Guide §3: keep every {web} page in the pane and open other sites (OAuth providers
        // included) in the system browser. Only top-level navigations are diverted, and
        // should_divert_cloud_url() excludes same-origin URLs and internal schemes.
        if (should_divert_cloud_url(url) && cloud_navigation_is_top_level(evt)) {
            evt.Veto();
            open_cloud_url_externally(url);
        }
    } else if (event_type == wxEVT_WEBVIEW_NEWWINDOW) {
        const wxString url = evt.GetURL();
        if (!url.empty()) {
            if (is_cloud_origin(url))
                load_cloud_url(url);
            else
                open_cloud_url_externally(url);
        }
        evt.Veto();
    } else if (event_type == wxEVT_WEBVIEW_SCRIPT_MESSAGE_RECEIVED) {
        on_cloud_script_message(evt.GetString().utf8_string());
    } else if (event_type == wxEVT_WEBVIEW_LOADED || event_type == wxEVT_WEBVIEW_ERROR) {
        // A Start URL deferred behind a sign-out (see load_cloud_after_signout).
        if (!m_cloud_after_signout_url.IsEmpty()) {
            const wxString next = std::exchange(m_cloud_after_signout_url, wxString());
            load_cloud_url(next);
        }
    }
}

References Slic3r::GUI::cloud_navigation_is_top_level(), is_cloud_origin(), load_cloud_url(), m_cloud_after_signout_url, on_cloud_script_message(), Slic3r::GUI::open_cloud_url_externally(), and should_divert_cloud_url().

Referenced by create_cloud_browser().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnCopy()

void Slic3r::GUI::WebViewPanel::OnCopy ( wxCommandEvent & evt )

{
    m_browser->Copy();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnCut()

void Slic3r::GUI::WebViewPanel::OnCut ( wxCommandEvent & evt )

{
    m_browser->Cut();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnDeleteSelection()

void Slic3r::GUI::WebViewPanel::OnDeleteSelection ( wxCommandEvent & evt )

{
    m_browser->DeleteSelection();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnDocumentLoaded()

void Slic3r::GUI::WebViewPanel::OnDocumentLoaded ( wxWebViewEvent & evt )

Callback invoked when a page is finished loading

{
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << evt.GetTarget().ToUTF8().data();
    // Only notify if the document is the main frame, not a subframe
    if (evt.GetURL() == m_browser->GetCurrentURL())
    {
        if (wxGetApp().get_mode() == comDevelop)
            wxLogMessage("%s", "Document loaded; url='" + evt.GetURL() + "'");
    }
    // A reloaded homepage loses its cloud-mode class; restore it if the pane is open.
    if (m_cloud_browser && m_cloud_browser->IsShown())
        RunScript("SetCloudMode(true)");
    UpdateState();
    SendCloudProvidersInfo();
}

References Slic3r::comDevelop, m_browser, m_cloud_browser, RunScript(), SendCloudProvidersInfo(), Slic3r::trace(), and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnEnableContextMenu()

void Slic3r::GUI::WebViewPanel::OnEnableContextMenu ( wxCommandEvent & evt )

{
    m_browser->EnableContextMenu(evt.IsChecked());
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnEnableDevTools()

void Slic3r::GUI::WebViewPanel::OnEnableDevTools ( wxCommandEvent & evt )

{
    m_browser->EnableAccessToDevTools(evt.IsChecked());
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnError()

void Slic3r::GUI::WebViewPanel::OnError ( wxWebViewEvent & evt )

Callback invoked when a loading error occurs

{
#define WX_ERROR_CASE(type) \
    case type: \
    category = #type; \
    break;
 
    wxString category;
    switch (evt.GetInt())
    {
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_CONNECTION);
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_CERTIFICATE);
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_AUTH);
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_SECURITY);
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_NOT_FOUND);
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_REQUEST);
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_USER_CANCELLED);
        WX_ERROR_CASE(wxWEBVIEW_NAV_ERR_OTHER);
    }
 
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": [" << category << "] " << evt.GetString().ToUTF8().data();
 
    if (wxGetApp().get_mode() == comDevelop) 
    {
        wxLogMessage("%s", "Error; url='" + evt.GetURL() + "', error='" + category + " (" + evt.GetString() + ")'");
 
        // Show the info bar with an error
        m_info->ShowMessage(wxString::Format(_L("An error occurred loading %s"), evt.GetURL()) + "\n" + "'" + category + "'", wxICON_ERROR);
    }
 
    UpdateState();
}

References _L, Slic3r::comDevelop, m_info, Slic3r::trace(), UpdateState(), and WX_ERROR_CASE.

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnForward()

void Slic3r::GUI::WebViewPanel::OnForward ( wxCommandEvent & evt )

Callback invoked when user pressed the "forward" button

{
    m_browser->GoForward();
    UpdateState();
}

References m_browser, and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnFreshLoginStatus()

void Slic3r::GUI::WebViewPanel::OnFreshLoginStatus ( wxTimerEvent & event )

{
    if (WebViewPanel::if_built() == this) {
        auto* app_config = Slic3r::GUI::wxGetApp().app_config;
        if (app_config && app_config->get_stealth_mode()) return;
        Slic3r::GUI::wxGetApp().get_login_info(ORCA_CLOUD_PROVIDER);
        if (app_config && app_config->has_cloud_provider(BBL_CLOUD_PROVIDER)) {
            Slic3r::GUI::wxGetApp().get_login_info(BBL_CLOUD_PROVIDER);
        }
    }
}

References Slic3r::BBL_CLOUD_PROVIDER(), Slic3r::GUI::LazyInstance< WebViewPanel >::if_built(), and Slic3r::ORCA_CLOUD_PROVIDER().

Here is the call graph for this function:

◆ OnIdle()

void Slic3r::GUI::WebViewPanel::OnIdle ( wxIdleEvent & evt )

{
#if !BBL_RELEASE_TO_PUBLIC
    if (m_browser->IsBusy())
    {
        wxSetCursor(wxCURSOR_ARROWWAIT);
        m_button_stop->Enable(true);
    }
    else
    {
        wxSetCursor(wxNullCursor);
        m_button_stop->Enable(false);
    }
#endif //BBL_RELEASE_TO_PUBLIC
}

References m_browser, and m_button_stop.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnLoadScheme()

void Slic3r::GUI::WebViewPanel::OnLoadScheme ( wxCommandEvent & evt )

{
    wxPathList pathlist;
    pathlist.Add(".");
    pathlist.Add("..");
    pathlist.Add("../help");
    pathlist.Add("../../../samples/help");
 
    wxFileName helpfile(pathlist.FindValidPath("doc.zip"));
    helpfile.MakeAbsolute();
    wxString path = helpfile.GetFullPath();
    //Under MSW we need to flip the slashes
    path.Replace("\\", "/");
    path = "wxfs:///" + path + ";protocol=zip/doc.htm";
    m_browser->LoadURL(path);
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnMode()

void Slic3r::GUI::WebViewPanel::OnMode ( wxCommandEvent & evt )

{
    m_browser->SetEditable(m_edit_mode->IsChecked());
}

References m_browser, and m_edit_mode.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnNavigationComplete()

void Slic3r::GUI::WebViewPanel::OnNavigationComplete ( wxWebViewEvent & evt )

Callback invoked when a navigation request was accepted

{
    m_browser->Show();
    Layout();
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << WebView::RedactUrl(evt.GetURL()).ToUTF8().data();
    if (wxGetApp().get_mode() == comDevelop)
        wxLogMessage("%s", "Navigation complete; url='" + evt.GetURL() + "'");
    UpdateState();
    ShowNetpluginTip();
}

References Slic3r::comDevelop, m_browser, WebView::RedactUrl(), ShowNetpluginTip(), Slic3r::trace(), and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnNavigationRequest()

void Slic3r::GUI::WebViewPanel::OnNavigationRequest ( wxWebViewEvent & evt )

Callback invoked when there is a request to load a new page (for instance when the user clicks a link)

{
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << WebView::RedactUrl(evt.GetURL()).ToUTF8().data();
    const wxString &url = evt.GetURL();
    if (url.StartsWith("File://") || url.StartsWith("file://")) {
        if (!url.Contains("/web/homepage/index.html")) {
            auto file = wxURL::Unescape(wxURL(url).GetPath());
#ifdef _WIN32
            if (file.StartsWith('/'))
                file = file.Mid(1);
            else
                file = "//" + file; // When file from network location
#endif
            wxGetApp().plater()->load_files(wxArrayString{1, &file});
            evt.Veto();
            return;
        }
    }
 
    if (m_info->IsShown())
    {
        m_info->Dismiss();
    }
 
    if (wxGetApp().get_mode() == comDevelop)
        wxLogMessage("%s", "Navigation request to '" + evt.GetURL() + "' (target='" +
            evt.GetTarget() + "')");
 
    //If we don't want to handle navigation then veto the event and navigation
    //will not take place, we also need to stop the loading animation
    if (!m_tools_handle_navigation->IsChecked())
    {
        evt.Veto();
        m_button_stop->Enable(false);
    }
    else
    {
        UpdateState();
    }
}

References Slic3r::comDevelop, m_button_stop, m_info, m_tools_handle_navigation, WebView::RedactUrl(), Slic3r::trace(), and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnNewWindow()

void Slic3r::GUI::WebViewPanel::OnNewWindow ( wxWebViewEvent & evt )

On new window, we veto to stop extra windows appearing

{
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << WebView::RedactUrl(evt.GetURL()).ToUTF8().data();
    wxString flag = " (other)";
 
    if (evt.GetNavigationAction() == wxWEBVIEW_NAV_ACTION_USER)
    {
        flag = " (user)";
    }
 
    if (wxGetApp().get_mode() == comDevelop)
        wxLogMessage("%s", "New window; url='" + evt.GetURL() + "'" + flag);
 
    //If we handle new window events then just load them in this window as we
    //are a single window browser
    if (m_tools_handle_new_window->IsChecked())
        m_browser->LoadURL(evt.GetURL());
 
    UpdateState();
}

References Slic3r::comDevelop, m_browser, m_tools_handle_new_window, WebView::RedactUrl(), Slic3r::trace(), and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnPaste()

void Slic3r::GUI::WebViewPanel::OnPaste ( wxCommandEvent & evt )

{
    m_browser->Paste();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnRedo()

void Slic3r::GUI::WebViewPanel::OnRedo ( wxCommandEvent & evt )

{
    m_browser->Redo();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnReload()

void Slic3r::GUI::WebViewPanel::OnReload ( wxCommandEvent & evt )

Callback invoked when user pressed the "reload" button

{
    m_browser->Reload();
    UpdateState();
}

References m_browser, and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptArray()

void Slic3r::GUI::WebViewPanel::OnRunScriptArray ( wxCommandEvent & evt )

{
    RunScript("function f(){ return [\"foo\", \"bar\"]; }f();");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptBool()

void Slic3r::GUI::WebViewPanel::OnRunScriptBool ( wxCommandEvent & evt )

{
    RunScript("function f(a){return a;}f(false);");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptCustom()

void Slic3r::GUI::WebViewPanel::OnRunScriptCustom ( wxCommandEvent & evt )

{
    wxTextEntryDialog dialog
    (
        this,
        "Please enter JavaScript code to execute",
        wxGetTextFromUserPromptStr,
        m_javascript,
        wxOK | wxCANCEL | wxCENTRE | wxTE_MULTILINE
    );
    if (dialog.ShowModal() != wxID_OK)
        return;
 
    RunScript(dialog.GetValue());
}

References m_javascript, and RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptDate()

void Slic3r::GUI::WebViewPanel::OnRunScriptDate ( wxCommandEvent & evt )

{
    RunScript("function f(){var d = new Date('10/08/2017 21:30:40'); \
    var tzoffset = d.getTimezoneOffset() * 60000; \
    return new Date(d.getTime() - tzoffset);}f();");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptDOM()

void Slic3r::GUI::WebViewPanel::OnRunScriptDOM ( wxCommandEvent & evt )

{
    RunScript("document.write(\"Hello World!\");");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptDouble()

void Slic3r::GUI::WebViewPanel::OnRunScriptDouble ( wxCommandEvent & evt )

{
    RunScript("function f(a){return a;}f(2.34);");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptInteger()

void Slic3r::GUI::WebViewPanel::OnRunScriptInteger ( wxCommandEvent & evt )

{
    RunScript("function f(a){return a;}f(123);");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptMessage()

void Slic3r::GUI::WebViewPanel::OnRunScriptMessage ( wxCommandEvent & evt )

{
    RunScript("window.wx.postMessage('This is a web message');");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptNull()

void Slic3r::GUI::WebViewPanel::OnRunScriptNull ( wxCommandEvent & evt )

{
    RunScript("function f(){return null;}f();");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptObject()

void Slic3r::GUI::WebViewPanel::OnRunScriptObject ( wxCommandEvent & evt )

{
    RunScript("function f(){var person = new Object();person.name = 'Foo'; \
    person.lastName = 'Bar';return person;}f();");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptString()

void Slic3r::GUI::WebViewPanel::OnRunScriptString ( wxCommandEvent & evt )

{
    RunScript("setCount(345);");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnRunScriptUndefined()

void Slic3r::GUI::WebViewPanel::OnRunScriptUndefined ( wxCommandEvent & evt )

{
    RunScript("function f(){var person = new Object();}f();");
}

References RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnScriptMessage()

void Slic3r::GUI::WebViewPanel::OnScriptMessage ( wxWebViewEvent & evt )

{
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << evt.GetString().ToUTF8().data();
    // update login status
    if (m_LoginUpdateTimer == nullptr) {
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " Create Timer";
        m_LoginUpdateTimer = new wxTimer(this, LOGIN_INFO_UPDATE_TIMER_ID);
        m_LoginUpdateTimer->Start(2000);
    }
 
    if (wxGetApp().get_mode() == comDevelop)
        wxLogMessage("Script message received; value = %s, handler = %s", evt.GetString(), evt.GetMessageHandler());
    std::string response = wxGetApp().handle_web_request(evt.GetString().ToUTF8().data());
    if (response.empty()) return;
 
    /* remove \n in response string */
    response.erase(std::remove(response.begin(), response.end(), '\n'), response.end());
    if (!response.empty()) {
        m_response_js = wxString::Format("window.postMessage('%s')", response);
        wxCommandEvent* event = new wxCommandEvent(EVT_RESPONSE_MESSAGE, this->GetId());
        wxQueueEvent(this, event);
    }
    else {
        m_response_js.clear();
    }
}

References Slic3r::comDevelop, LOGIN_INFO_UPDATE_TIMER_ID, m_LoginUpdateTimer, m_response_js, and Slic3r::trace().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnScriptResponseMessage()

void Slic3r::GUI::WebViewPanel::OnScriptResponseMessage ( wxCommandEvent & evt )

{
    if (!m_response_js.empty()) {
        RunScript(m_response_js);
    }
}

References m_response_js, and RunScript().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnSelectAll()

void Slic3r::GUI::WebViewPanel::OnSelectAll ( wxCommandEvent & evt )

{
    m_browser->SelectAll();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnSetCustomUserAgent()

void Slic3r::GUI::WebViewPanel::OnSetCustomUserAgent ( wxCommandEvent & evt )

{
    wxString customUserAgent = "Mozilla/5.0 (iPhone; CPU iPhone OS 13_1_3 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/13.0.1 Mobile/15E148 Safari/604.1";
    wxTextEntryDialog dialog
    (
        this,
        "Enter the custom user agent string you would like to use.",
        wxGetTextFromUserPromptStr,
        customUserAgent,
        wxOK | wxCANCEL | wxCENTRE
    );
    if (dialog.ShowModal() != wxID_OK)
        return;
 
    if (!m_browser->SetUserAgent(customUserAgent))
        wxLogError("Could not set custom user agent");
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnStop()

void Slic3r::GUI::WebViewPanel::OnStop ( wxCommandEvent & evt )

Callback invoked when user pressed the "stop" button

{
    m_browser->Stop();
    UpdateState();
}

References m_browser, and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnTitleChanged()

void Slic3r::GUI::WebViewPanel::OnTitleChanged ( wxWebViewEvent & evt )

{
    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << evt.GetString().ToUTF8().data();
    // wxGetApp().CallAfter([this] { SendRecentList(); });
}

References Slic3r::trace().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnToolsClicked()

void Slic3r::GUI::WebViewPanel::OnToolsClicked ( wxCommandEvent & evt )

Invoked when user selects the "Menu" item

{
    if (m_browser->GetCurrentURL() == "")
        return;
 
    m_edit_cut->Enable(m_browser->CanCut());
    m_edit_copy->Enable(m_browser->CanCopy());
    m_edit_paste->Enable(m_browser->CanPaste());
 
    m_edit_undo->Enable(m_browser->CanUndo());
    m_edit_redo->Enable(m_browser->CanRedo());
 
    m_selection_clear->Enable(m_browser->HasSelection());
    m_selection_delete->Enable(m_browser->HasSelection());
 
    m_context_menu->Check(m_browser->IsContextMenuEnabled());
    m_dev_tools->Check(m_browser->IsAccessToDevToolsEnabled());
 
    wxPoint position = ScreenToClient(wxGetMousePosition());
    PopupMenu(m_tools_menu, position.x, position.y);
}

References m_browser, m_context_menu, m_dev_tools, m_edit_copy, m_edit_cut, m_edit_paste, m_edit_redo, m_edit_undo, m_selection_clear, m_selection_delete, and m_tools_menu.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnUndo()

void Slic3r::GUI::WebViewPanel::OnUndo ( wxCommandEvent & evt )

{
    m_browser->Undo();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnUrl()

void Slic3r::GUI::WebViewPanel::OnUrl ( wxCommandEvent & evt )

Callback invoked when user entered an URL and pressed enter

{
    if (wxGetApp().get_mode() == comDevelop)
        wxLogMessage(m_url->GetValue());
    m_browser->LoadURL(m_url->GetValue());
    m_browser->SetFocus();
    UpdateState();
}

References Slic3r::comDevelop, m_browser, m_url, and UpdateState().

Referenced by WebViewPanel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ OnUseMemoryFS()

void Slic3r::GUI::WebViewPanel::OnUseMemoryFS ( wxCommandEvent & evt )

{
    m_browser->LoadURL("memory:page1.htm");
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnViewSourceRequest()

void Slic3r::GUI::WebViewPanel::OnViewSourceRequest ( wxCommandEvent & evt )

Invoked when user selects the "View Source" menu item

{
    SourceViewDialog dlg(this, m_browser->GetPageSource());
    dlg.ShowModal();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OnViewTextRequest()

void Slic3r::GUI::WebViewPanel::OnViewTextRequest ( wxCommandEvent & evt )

Invoked when user selects the "View Text" menu item

{
    wxDialog textViewDialog(this, wxID_ANY, "Page Text",
        wxDefaultPosition, wxSize(700, 500),
        wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER);
 
    wxTextCtrl* text = new wxTextCtrl(this, wxID_ANY, m_browser->GetPageText(),
        wxDefaultPosition, wxDefaultSize,
        wxTE_MULTILINE |
        wxTE_RICH |
        wxTE_READONLY);
 
    wxBoxSizer* sizer = new wxBoxSizer(wxVERTICAL);
    sizer->Add(text, 1, wxEXPAND);
    SetSizer(sizer);
    textViewDialog.ShowModal();
}

References m_browser.

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ OpenModelDetail()

void Slic3r::GUI::WebViewPanel::OpenModelDetail	(	std::string	id,
		NetworkAgent *	agent )

{
    std::string url;
    if ((agent ? agent->get_model_mall_detail_url(&url, id, wxGetApp().get_printer_cloud_provider()) : get_model_mall_detail_url(&url, id)) == 0)
    {
        if (url.find("?") != std::string::npos) 
        { 
            url += "&from=orcaslicer";
        } else {
            url += "?from=orcaslicer";
        }
        
        wxLaunchDefaultBrowser(url); 
    }
}

References get_model_mall_detail_url(), and Slic3r::NetworkAgent::get_model_mall_detail_url().

Here is the call graph for this function:

◆ reset_browser()

void Slic3r::GUI::WebViewPanel::reset_browser ( )

private

{
    // Rebuild both views the same way, keeping the cloud pane's open/closed state.
    const bool cloud_on = m_cloud_browser && m_cloud_browser->IsShown();
 
    m_browser->Destroy(); // also removes it from the sizer
    create_browser();
    m_content_sizer->Insert(size_t(0), m_browser, wxSizerFlags().Expand().Proportion(1));
 
    if (m_cloud_browser) {
        m_cloud_browser->Destroy();
        m_cloud_browser = nullptr;
        create_cloud_browser();
        schedule_cloud_load(wxString(kCloudUrl));
        m_cloud_browser->Show(cloud_on);
        // The rebuilt pane holds no seed, so the next open loads the Start URL again.
        m_cloud_seed_url.clear();
    }
 
    apply_cloud_layout(cloud_on);
}

References apply_cloud_layout(), create_browser(), create_cloud_browser(), Slic3r::GUI::kCloudUrl, m_browser, m_cloud_browser, m_cloud_seed_url, m_content_sizer, and schedule_cloud_load().

Referenced by Show().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ RunScript()

void Slic3r::GUI::WebViewPanel::RunScript ( const wxString & javascript )

{
    // Remember the script we run in any case, so the next time the user opens
    // the "Run Script" dialog box, it is shown there for convenient updating.
    m_javascript = javascript;
 
    if (!m_browser) return;
 
    WebView::RunScript(m_browser, javascript);
}

References m_browser, m_javascript, and WebView::RunScript().

Referenced by OnDocumentLoaded(), OnRunScriptArray(), OnRunScriptBool(), OnRunScriptCustom(), OnRunScriptDate(), OnRunScriptDOM(), OnRunScriptDouble(), OnRunScriptInteger(), OnRunScriptMessage(), OnRunScriptNull(), OnRunScriptObject(), OnRunScriptString(), OnRunScriptUndefined(), OnScriptResponseMessage(), SendCloudProvidersInfo(), SendLoginInfo(), SendRecentList(), set_cloud_mode(), SetLoginPanelVisibility(), and ShowNetpluginTip().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ schedule_cloud_load()

void Slic3r::GUI::WebViewPanel::schedule_cloud_load ( const wxString & url )

private

{
    if (!m_cloud_browser) {
        load_cloud_after_signout(url);
        return;
    }
    // CreateWebView queues the "wx" handler add on the view (macOS/Linux); queue the load behind
    // it so the page's first scripts already see the bridge (guide §3).
    m_cloud_browser->CallAfter([this, url]() { load_cloud_after_signout(url); });
}

References load_cloud_after_signout(), and m_cloud_browser.

Referenced by reset_browser(), and set_cloud_mode().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SendCloudProvidersInfo()

void Slic3r::GUI::WebViewPanel::SendCloudProvidersInfo ( )

{
    auto* app_config = wxGetApp().app_config;
    if (!app_config)
        return;
 
    json j;
    j["command"] = "cloud_providers_info";
    json data;
    json provider_array = json::array();
 
    if (!app_config->get_hide_login_side_panel()) {
        auto providers = app_config->get_cloud_providers();
        for (const auto& p : providers) {
            provider_array.push_back(p);
        }
    }
 
    data["providers"] = provider_array;
    j["data"] = data;
 
    wxString strJS = wxString::Format("window.postMessage(%s)", j.dump());
    RunScript(strJS);
}

References RunScript().

Referenced by OnDocumentLoaded().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SendDesignStaffpick()

void Slic3r::GUI::WebViewPanel::SendDesignStaffpick ( bool on )

{
    // if (on) {
    //     get_design_staffpick(0, 60, [this](std::string body) {
    //         if (body.empty() || body.front() != '{') {
    //             BOOST_LOG_TRIVIAL(warning) << "get_design_staffpick failed " + body;
    //             return;
    //         }
    //         CallAfter([this, body] {
    //             auto body2 = from_u8(body);
    //             body2.insert(1, "\"command\": \"modelmall_model_advise_get\", ");
    //             RunScript(wxString::Format("window.postMessage(%s)", body2));
    //         });
    //     });
    // } else {
    //     std::string body2 = "{\"total\":0, \"hits\":[]}";
    //     body2.insert(1, "\"command\": \"modelmall_model_advise_get\", ");
    //     RunScript(wxString::Format("window.postMessage(%s)", body2));
    // }
}

◆ SendLoginInfo()

void Slic3r::GUI::WebViewPanel::SendLoginInfo ( )

{
    if (wxGetApp().getAgent()) {
        std::string login_info = wxGetApp().getAgent()->build_login_info();
        wxString strJS = wxString::Format("window.postMessage(%s)", login_info);
        RunScript(strJS);
    }
}

References RunScript().

Here is the call graph for this function:

◆ SendRecentList()

void Slic3r::GUI::WebViewPanel::SendRecentList ( int images )

{
    boost::property_tree::wptree req;
    boost::property_tree::wptree data;
    wxGetApp().mainframe->get_recent_projects(data, images);
    req.put(L"sequence_id", "");
    req.put(L"command", L"get_recent_projects");
    req.put_child(L"response", data);
    std::wostringstream oss;
    pt::write_json(oss, req, false);
    RunScript(wxString::Format("window.postMessage(%s)", oss.str()));
}

References L, and RunScript().

Here is the call graph for this function:

◆ set_cloud_mode()

void Slic3r::GUI::WebViewPanel::set_cloud_mode	(	bool	on,
		const wxString &	url = wxString(),
		const wxString &	page_url = wxString() )

{
    if (on) {
        // load_cloud_url records the origin from whatever it loads, including the plain cloud
        // fallback used when `url` is empty.
        if (!m_cloud_browser) {
            create_cloud_browser();
            m_cloud_seed_url = url;
            schedule_cloud_load(url.empty() ? wxString(kCloudUrl) : url);
        } else if (!page_url.empty()) {
            // The pane already holds a session, so an explicit page loads straight in; the handoff is
            // only needed to establish one, not to reach an ordinary page.
            load_cloud_url(page_url);
        } else if (!url.empty() && url != m_cloud_seed_url) {
            // Re-seed only when the Start URL actually changed — a login, an account switch or a
            // sign-out changes it; an ordinary re-open does not (guide §8). Reloading an unchanged
            // Start URL re-runs the page's auth check on every open, which flashes "Signing you
            // in…" and re-requests a session (guide §10: mint when the page asks, not per open).
            // The pane is kept alive, so an unchanged open just shows the page it already holds.
            m_cloud_seed_url = url;
            load_cloud_after_signout(url);
        }
        m_cloud_browser->Show();
        // The homepage shell owns the nav highlight and the cloud-mode layout class. A native open
        // (not the page's own GotoCloud) must ask it to switch; the page's SetCloudMode no-ops if it
        // already did. OnDocumentLoaded re-applies this when the homepage was still loading.
        RunScript("SetCloudMode(true)");
    } else if (m_cloud_browser) {
        // Closing keeps the pane alive with its session, so re-opening does not have to sign in
        // again (guide §10). Nothing is cleared here.
        m_cloud_browser->Hide();
    }
    apply_cloud_layout(on && m_cloud_browser != nullptr);
}

References apply_cloud_layout(), create_cloud_browser(), Slic3r::GUI::kCloudUrl, load_cloud_after_signout(), load_cloud_url(), m_cloud_browser, m_cloud_seed_url, RunScript(), and schedule_cloud_load().

Here is the call graph for this function:

◆ SetLoginPanelVisibility()

void Slic3r::GUI::WebViewPanel::SetLoginPanelVisibility ( bool bshow )

{
    wxString strJS = wxString::Format("SetLoginPanelVisibility(%s)", bshow ? "true" : "false");
    RunScript(strJS);
}

References RunScript().

Here is the call graph for this function:

◆ should_divert_cloud_url()

bool Slic3r::GUI::WebViewPanel::should_divert_cloud_url ( const wxString & url ) const

private

{
    const wxString origin = http_origin_of(url);
    // Unknown cloud origin or a non-web scheme: never divert (the pane must keep working).
    if (origin.IsEmpty() || m_cloud_base_url.IsEmpty())
        return false;
    return origin != m_cloud_base_url;
}

References Slic3r::GUI::http_origin_of(), and m_cloud_base_url.

Referenced by OnCloudWebViewEvent().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ Show()

bool Slic3r::GUI::WebViewPanel::Show ( bool show = true )

override

{
    if (show && std::exchange(m_reset_on_show, false))
        reset_browser();
    return wxPanel::Show(show);
}

References m_reset_on_show, and reset_browser().

Referenced by load_url().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ShowNetpluginTip()

void Slic3r::GUI::WebViewPanel::ShowNetpluginTip ( )

{
    // Install Network Plugin
    const auto bblnetwork_enabled =wxGetApp().app_config->get_bool("installed_networking");
    if(!bblnetwork_enabled) {
        return;
    }
    bool        bValid       = wxGetApp().is_compatibility_version();
 
    int nShow = 0;
    if (!bValid) nShow = 1;
 
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__<< boost::format(": bValid=%1%, nShow=%2%")%bValid %nShow;
 
    json m_Res           = json::object();
    m_Res["command"]     = "network_plugin_installtip";
    m_Res["sequence_id"] = "10001";
    m_Res["show"]        = nShow;
 
    wxString strJS = wxString::Format("window.postMessage(%s)", m_Res.dump(-1, ' ', false, json::error_handler_t::ignore));
 
    RunScript(strJS);
}

References RunScript().

Referenced by OnNavigationComplete().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ update_mode()

void Slic3r::GUI::WebViewPanel::update_mode ( )

{
    GetSizer()->Show(size_t(0), wxGetApp().app_config->get("internal_developer_mode") == "true");
    GetSizer()->Layout();
}

Referenced by WebViewPanel().

Here is the caller graph for this function:

◆ UpdateState()

void Slic3r::GUI::WebViewPanel::UpdateState ( )

Method that retrieves the current state from the web control and updates the GUI the reflect this current state.

{
#if !BBL_RELEASE_TO_PUBLIC
    if (m_browser->CanGoBack()) {
        m_button_back->Enable(true);
    }
    else {
        m_button_back->Enable(false);
    }
    if (m_browser->CanGoForward()) {
        m_button_forward->Enable(true);
    }
    else {
        m_button_forward->Enable(false);
    }
    if (m_browser->IsBusy())
    {
        m_button_stop->Enable(true);
    }
    else
    {
        m_button_stop->Enable(false);
    }
 
    //SetTitle(m_browser->GetCurrentTitle());
    m_url->SetValue(m_browser->GetCurrentURL());
#endif //BBL_RELEASE_TO_PUBLIC
}

References m_browser, m_button_back, m_button_forward, m_button_stop, and m_url.

Referenced by load_url(), OnBack(), OnDocumentLoaded(), OnError(), OnForward(), OnNavigationComplete(), OnNavigationRequest(), OnNewWindow(), OnReload(), OnStop(), and OnUrl().

Here is the caller graph for this function:

◆ when_built()

void Slic3r::GUI::LazyInstance< WebViewPanel >::when_built ( std::function< void(WebViewPanel &)> fn )

inlinestaticinherited

    {
        if (s_lazy)
            s_lazy->when_built(std::move(fn));
    }

176{false};

Referenced by cloud_signed_out(), and load_cloud_after_signout().

◆ m_cloud_seed_url

wxString Slic3r::GUI::WebViewPanel::m_cloud_seed_url

private

Referenced by cloud_signed_out(), reset_browser(), and set_cloud_mode().

◆ m_cloud_signout_url

wxString Slic3r::GUI::WebViewPanel::m_cloud_signout_url

private

Referenced by cloud_signed_out(), and load_cloud_after_signout().

◆ m_content_sizer

wxBoxSizer* Slic3r::GUI::WebViewPanel::m_content_sizer {nullptr}

◆ s_lazy

Lazy<WebViewPanel>* Slic3r::GUI::LazyInstance< WebViewPanel >::s_lazy

inlinestaticprivateinherited

196{ nullptr };

The documentation for this class was generated from the following files:

/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/WebViewDialog.hpp
/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/WebViewDialog.cpp

	OrcaSlicer latest OrcaSlicer

Public Member Functions

Static Public Member Functions

Public Attributes

Private Member Functions

Private Attributes

Static Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ WebViewPanel()

◆ ~WebViewPanel()

Member Function Documentation

◆ apply_cloud_layout()

◆ clear_cloud_storage()

◆ cloud_mode_active()

◆ cloud_signed_out()

◆ create_browser()

◆ create_cloud_browser()

◆ ensure()

◆ get_design_staffpick()

◆ get_model_mall_detail_url()

◆ if_built()

◆ is_cloud_origin()

◆ load_cloud_after_signout()

◆ load_cloud_url()

◆ load_url()

◆ on_cloud_script_message()

◆ OnAddUserScript()

◆ OnBack()

◆ OnClearSelection()

◆ OnClose()

◆ OnCloudWebViewEvent()

◆ OnCopy()

◆ OnCut()

◆ OnDeleteSelection()

◆ OnDocumentLoaded()

◆ OnEnableContextMenu()

◆ OnEnableDevTools()

◆ OnError()

◆ OnForward()

◆ OnFreshLoginStatus()

◆ OnIdle()

◆ OnLoadScheme()

◆ OnMode()

◆ OnNavigationComplete()

◆ OnNavigationRequest()

◆ OnNewWindow()

◆ OnPaste()

◆ OnRedo()

◆ OnReload()

◆ OnRunScriptArray()

◆ OnRunScriptBool()

◆ OnRunScriptCustom()

◆ OnRunScriptDate()

◆ OnRunScriptDOM()

◆ OnRunScriptDouble()

◆ OnRunScriptInteger()

◆ OnRunScriptMessage()

◆ OnRunScriptNull()

◆ OnRunScriptObject()

◆ OnRunScriptString()

◆ OnRunScriptUndefined()

◆ OnScriptMessage()

◆ OnScriptResponseMessage()

◆ OnSelectAll()

◆ OnSetCustomUserAgent()

◆ OnStop()

◆ OnTitleChanged()

◆ OnToolsClicked()

◆ OnUndo()

◆ OnUrl()

◆ OnUseMemoryFS()

◆ OnViewSourceRequest()

◆ OnViewTextRequest()

◆ OpenModelDetail()

◆ reset_browser()

◆ RunScript()

◆ schedule_cloud_load()

◆ SendCloudProvidersInfo()

◆ SendDesignStaffpick()

◆ SendLoginInfo()