#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/calib_dlg.hpp>

Inheritance diagram for Slic3r::GUI::VFA_Test_Dlg:

Collaboration diagram for Slic3r::GUI::VFA_Test_Dlg:

Public Member Functions
	VFA_Test_Dlg (wxWindow parent, wxWindowID id, Plater plater)
	~VFA_Test_Dlg ()
void	on_dpi_changed (const wxRect &suggested_rect) override
void	EndModal (int retCode) override
float	scale_factor () const
float	prev_scale_factor () const
void	set_scale_factor (float v)
void	set_prev_scale_factor (float v)
void	set_em_unit (int v)
bool	force_rescale () const
int	em_unit () const
const wxFont &	normal_font () const
void	enable_force_rescale ()
int	ShowModal ()

Protected Member Functions
virtual void	on_start (wxCommandEvent &event)
virtual void	on_sys_color_changed ()

Protected Attributes
Calib_Params	m_params
TextInput *	m_tiStart
TextInput *	m_tiEnd
TextInput *	m_tiStep
CheckBox *	m_cbAutoAdjust
CheckBox *	m_cbResize
Plater *	m_plater

Private Member Functions
void	update_em_unit ()
bool	is_new_scale_factor () const
void	rescale (const wxRect &suggested_rect)

Private Attributes
float	m_scale_factor
int	m_em_unit
wxFont	m_normal_font
float	m_prev_scale_factor
bool	m_can_rescale
bool	m_force_rescale
int	m_new_font_point_size

Detailed Description

Constructor & Destructor Documentation

◆ VFA_Test_Dlg()

Slic3r::GUI::VFA_Test_Dlg::VFA_Test_Dlg	(	wxWindow *	parent,
		wxWindowID	id,
		Plater *	plater )

    : DPIDialog(parent, id, _L("VFA test"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE)
    , m_plater(plater)
{
    SetBackgroundColour(*wxWHITE); // make sure background color set for dialog
    SetForegroundColour(wxColour("#363636"));
    SetFont(Label::Body_14);
 
    wxBoxSizer* v_sizer = new wxBoxSizer(wxVERTICAL);
    SetSizer(v_sizer);
 
    // Settings
    wxString start_str    = _L("Start speed: ");
    wxString end_vol_str  = _L("End speed: ");
    wxString vol_step_str = _L_CONTEXT("Step", "Increment") + ": ";
    int text_max = GetTextMax(this, std::vector<wxString>{start_str, end_vol_str, vol_step_str});
 
    auto st_size = wxSize(text_max, -1);
    auto ti_size = FromDIP(wxSize(120, -1));
 
    LabeledStaticBox* stb = new LabeledStaticBox(this, _L("Settings"));
    wxStaticBoxSizer* settings_sizer = new wxStaticBoxSizer(stb, wxVERTICAL);
 
    settings_sizer->AddSpacer(FromDIP(5));
 
    // start vol
    auto start_vol_sizer = new wxBoxSizer(wxHORIZONTAL);
    auto start_vol_text = new wxStaticText(this, wxID_ANY, start_str, wxDefaultPosition, st_size, wxALIGN_LEFT);
    m_tiStart = new TextInput(this, std::to_string(40), _L("mm/s"), "", wxDefaultPosition, ti_size);
    m_tiStart->GetTextCtrl()->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
 
    start_vol_sizer->Add(start_vol_text, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    start_vol_sizer->Add(m_tiStart     , 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    settings_sizer->Add(start_vol_sizer, 0, wxLEFT, FromDIP(3));
 
    // end vol
    auto end_vol_sizer = new wxBoxSizer(wxHORIZONTAL);
    auto end_vol_text = new wxStaticText(this, wxID_ANY, end_vol_str, wxDefaultPosition, st_size, wxALIGN_LEFT);
    m_tiEnd = new TextInput(this, std::to_string(200), _L("mm/s"), "", wxDefaultPosition, ti_size);
    m_tiEnd->GetTextCtrl()->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
    end_vol_sizer->Add(end_vol_text, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    end_vol_sizer->Add(m_tiEnd     , 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    settings_sizer->Add(end_vol_sizer, 0, wxLEFT, FromDIP(3));
 
    // vol step
    auto vol_step_sizer = new wxBoxSizer(wxHORIZONTAL);
    auto vol_step_text = new wxStaticText(this, wxID_ANY, vol_step_str, wxDefaultPosition, st_size, wxALIGN_LEFT);
    m_tiStep = new TextInput(this, wxString::FromDouble(10), _L("mm/s"), "", wxDefaultPosition, ti_size);
    m_tiStep->GetTextCtrl()->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
    vol_step_sizer->Add(vol_step_text, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    vol_step_sizer->Add(m_tiStep     , 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    settings_sizer->Add(vol_step_sizer, 0, wxLEFT, FromDIP(3));
 
    // Resize the model to the nozzle diameter (recommended)
    m_cbResize = add_scale_checkbox(this, settings_sizer);
 
    // Auto-adjust parameters to the filament's max volumetric speed
    auto auto_adjust_sizer = new wxBoxSizer(wxHORIZONTAL);
    m_cbAutoAdjust = new CheckBox(this);
    m_cbAutoAdjust->SetValue(true);
    auto auto_adjust_text = new wxStaticText(this, wxID_ANY, _L("Auto-adjust to max volumetric speed"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
    m_cbAutoAdjust->SetToolTip(_L("If the end speed would exceed the filament's maximum volumetric speed, automatically lower the layer "
                                  "height (keeping standard values and staying within the machine's limits) to reach it. If even the "
                                  "minimum layer height is not enough, lower the end speed instead."));
    auto_adjust_text->SetToolTip(m_cbAutoAdjust->GetToolTipText());
    auto_adjust_sizer->Add(m_cbAutoAdjust  , 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    auto_adjust_sizer->Add(auto_adjust_text, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    settings_sizer->Add(auto_adjust_sizer, 0, wxLEFT | wxTOP, FromDIP(3));
 
    settings_sizer->AddSpacer(FromDIP(5));
 
    v_sizer->Add(settings_sizer, 0, wxTOP | wxRIGHT | wxLEFT | wxEXPAND, FromDIP(10));
    v_sizer->AddSpacer(FromDIP(5));
 
    auto dlg_btns = new DialogButtons(this, {"OK"});
 
    auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
 
    auto wiki_btn = new Button(this, "", "toolbar_wiki", 0, 15);
    auto wiki_url = "https://www.orcaslicer.com/wiki/vfa_calib";
    wiki_btn->SetToolTip(_L("Wiki Guide") + "\n" + wiki_url);
    wiki_btn->SetStyle(ButtonStyle::Confirm, ButtonType::Circle);
    wiki_btn->SetCanFocus(false);
    wiki_btn->Bind(wxEVT_LEFT_DOWN, ([wiki_url](auto& e) {wxLaunchDefaultBrowser(wiki_url);}));
 
    bottom_sizer->Add(wiki_btn, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(10));
    bottom_sizer->AddStretchSpacer();
    bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
    v_sizer->Add(bottom_sizer, 0, wxEXPAND);
 
    dlg_btns->GetOK()->Bind(wxEVT_BUTTON, &VFA_Test_Dlg::on_start, this);
 
    wxGetApp().UpdateDlgDarkUI(this);
 
    Layout();
    Fit();
    v_sizer->SetSizeHints(this);
}

References _L, _L_CONTEXT, Label::Body_14, Circle, Confirm, Slic3r::GUI::DialogButtons::GetOK(), m_cbAutoAdjust, m_cbResize, m_plater, m_tiEnd, m_tiStart, m_tiStep, on_start(), Slic3r::GUI::plater(), and wxStaticText.

Here is the call graph for this function:

◆ ~VFA_Test_Dlg()

Slic3r::GUI::VFA_Test_Dlg::~VFA_Test_Dlg ( )

{
    // Disconnect Events
}

Member Function Documentation

◆ em_unit()

int Slic3r::GUI::DPIAware< wxDialog >::em_unit ( ) const

inlineinherited

203{ return m_em_unit; }

Slic3r::GUI::DPIAware

Definition GUI_Utils.hpp:107

Here is the caller graph for this function:

◆ enable_force_rescale()

void Slic3r::GUI::DPIAware< wxDialog >::enable_force_rescale ( )

inlineinherited

206{ m_force_rescale = true; }

◆ EndModal()

void Slic3r::GUI::DPIDialog::EndModal ( int retCode )

inlineoverrideinherited

    {
        if (!dialogStack.empty() && dialogStack.front() != this) {
            // This is a bug in wxWidgets
            // when the dialog is not top modal dialog, EndModal() just hide dialog without quit 
            // the modal event loop. And the modal event loop blocks us from bottom widgets.
            // Solution: let user click it manually or close outside. FIXME
            BOOST_LOG_TRIVIAL(warning) << "DPIAware::EndModal Error: dialogStack is not empty, but top dialog is not this one. retCode=" << retCode;
            return;
        }
 
        return wxDialog::EndModal(retCode);
    }

References Slic3r::GUI::dialogStack.

◆ force_rescale()

bool Slic3r::GUI::DPIAware< wxDialog >::force_rescale ( ) const

inlineinherited

201{ return m_force_rescale; }

◆ is_new_scale_factor()

bool Slic3r::GUI::DPIAware< wxDialog >::is_new_scale_factor ( ) const

inlineprivateinherited

262{ return fabs(m_scale_factor - m_prev_scale_factor) > 0.001; }

◆ normal_font()

const wxFont & Slic3r::GUI::DPIAware< wxDialog >::normal_font ( ) const

inlineinherited

205{ return m_normal_font; }

Here is the caller graph for this function:

◆ on_dpi_changed()

void Slic3r::GUI::VFA_Test_Dlg::on_dpi_changed ( const wxRect & suggested_rect )

overridevirtual

Implements Slic3r::GUI::DPIAware< wxDialog >.

{
    this->Refresh();
    Fit();
}

◆ on_start()

void Slic3r::GUI::VFA_Test_Dlg::on_start ( wxCommandEvent & event )

protectedvirtual

{
    bool read_double = false;
    read_double = m_tiStart->GetTextCtrl()->GetValue().ToDouble(&m_params.start);
    read_double = read_double && m_tiEnd->GetTextCtrl()->GetValue().ToDouble(&m_params.end);
    read_double = read_double && m_tiStep->GetTextCtrl()->GetValue().ToDouble(&m_params.step);
 
    if (!read_double || m_params.start <= 10 || m_params.step <= 0 || m_params.end < (m_params.start + m_params.step)) {
        MessageDialog msg_dlg(nullptr, _L("Please input valid values:\nstart > 10\nstep >= 0\nend > start + step"), wxEmptyString, wxICON_WARNING | wxOK);
        msg_dlg.ShowModal();
        return;
    }
 
    // If the requested end speed would exceed the filament's maximum volumetric speed, the slicer clamps the
    // outer wall speed, so the upper blocks of the tower would all print at the same (clamped) speed instead of
    // the requested one. Depending on the "Auto-adjust" option, either fix it automatically or just warn.
    m_params.vfa_layer_height    = 0.0; // 0 = auto (nozzle/2); overridden below when auto-adjusting
    m_params.nozzle_based_resize = m_cbResize->GetValue();
    if (const auto* preset_bundle = wxGetApp().preset_bundle) {
        const auto& printer_config  = preset_bundle->printers.get_edited_preset().config;
        const auto& print_config    = preset_bundle->prints.get_edited_preset().config;
        const auto& filament_config = preset_bundle->filaments.get_edited_preset().config;
 
        const int extruder_id = std::max(m_params.extruder_id, 0);
        auto get_at = [extruder_id](const ConfigOptionFloats* opt, double fallback) {
            if (opt == nullptr || opt->values.empty())
                return fallback;
            return opt->values[std::min(static_cast<size_t>(extruder_id), opt->values.size() - 1)];
        };
 
        const double nozzle_diameter = get_at(printer_config.option<ConfigOptionFloats>("nozzle_diameter"), vfa_base_nozzle_diameter);
        double preset_lh = nozzle_diameter / 2.0;
        if (const auto* lh_opt = print_config.option<ConfigOptionFloat>("layer_height"))
            if (lh_opt->value > 0.0)
                preset_lh = lh_opt->value;
        // Layer height the tower will actually print at: nozzle/2 when resizing, else the preset value.
        const double default_lh      = m_params.nozzle_based_resize ? nozzle_diameter / 2.0 : preset_lh;
        const double max_vol_speed   = get_at(filament_config.option<ConfigOptionFloats>("filament_max_volumetric_speed"), 0.0);
        const double machine_min_lh  = get_at(printer_config.option<ConfigOptionFloats>("min_layer_height"), 0.0);
        const double machine_max_lh  = get_at(printer_config.option<ConfigOptionFloats>("max_layer_height"), 0.0);
 
        double line_width = print_config.get_abs_value("outer_wall_line_width", nozzle_diameter);
        if (line_width <= 0.0)
            line_width = print_config.get_abs_value("line_width", nozzle_diameter);
        if (line_width <= 0.0)
            line_width = nozzle_diameter;
 
        // Max outer-wall speed printable at a given layer height without exceeding the volumetric limit.
        auto speed_limit_for_lh = [&](double lh) -> double {
            const double mm3_per_mm = Flow(line_width, lh, nozzle_diameter).mm3_per_mm();
            return mm3_per_mm > 0.0 ? max_vol_speed / mm3_per_mm : 1e9;
        };
 
        auto confirm_clamp = [&](const wxString& question) -> bool {
            MessageDialog msg_dlg(nullptr,
                wxString::Format(_L("The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed "
                                    "(%.1f mm³/s), which limits the outer wall to about %.0f mm/s at this line width and "
                                    "layer height.\n Speeds above this will be clamped, so the upper blocks of the tower "
                                    "will not print at the requested speed.\n\n%s"),
                                 m_params.end, max_vol_speed, speed_limit_for_lh(default_lh), question),
                _L("VFA test"), wxICON_WARNING | wxYES_NO | wxNO_DEFAULT);
            return msg_dlg.ShowModal() == wxID_YES;
        };
 
        if (max_vol_speed > 0.0 && nozzle_diameter > 0.0 && m_params.end > speed_limit_for_lh(default_lh)) {
            // The layer-height auto-adjust only applies when resizing is enabled (it changes the layer height).
            if (m_cbAutoAdjust->GetValue() && m_params.nozzle_based_resize) {
                // Candidate layer heights are the ones actually used by the process profiles compatible with the
                // current printer (clamped to the machine's layer-height limits, when set). A smaller layer height
                // means a smaller cross-section, hence a higher printable speed under the volumetric limit; pick the
                // largest candidate that still reaches the end speed to keep the change from the default minimal.
                std::vector<double> candidates;
                for (const auto& preset : preset_bundle->prints.get_presets()) {
                    if (!preset.is_compatible || preset.is_default)
                        continue;
                    const auto* lh_opt = preset.config.option<ConfigOptionFloat>("layer_height");
                    if (lh_opt == nullptr || lh_opt->value <= 0.0)
                        continue;
                    const double lh = lh_opt->value;
                    if ((machine_min_lh > 0.0 && lh < machine_min_lh - 1e-6) ||
                        (machine_max_lh > 0.0 && lh > machine_max_lh + 1e-6))
                        continue;
                    candidates.push_back(lh);
                }
                std::sort(candidates.begin(), candidates.end());
                candidates.erase(std::unique(candidates.begin(), candidates.end(),
                                             [](double a, double b) { return std::abs(a - b) < 1e-6; }),
                                 candidates.end());
 
                // Largest candidate <= the default layer height that still reaches the end speed (smallest change).
                double chosen_lh = 0.0;
                for (auto it = candidates.rbegin(); it != candidates.rend(); ++it) {
                    if (*it > default_lh + 1e-6)
                        continue; // never increase the layer height above the default
                    if (speed_limit_for_lh(*it) >= m_params.end) { chosen_lh = *it; break; }
                }
 
                if (chosen_lh > 0.0) {
                    // Reducing the layer height is enough to reach the requested end speed.
                    m_params.vfa_layer_height = chosen_lh;
                    MessageDialog msg_dlg(nullptr,
                        wxString::Format(_L("The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed "
                                            "(%.1f mm³/s) at the default layer height (%.2f mm).\n\n"
                                            "The layer height has been reduced to %.2f mm (a value used by this printer's "
                                            "profiles) so the tower can reach the requested speed."),
                                         m_params.end, max_vol_speed, default_lh, chosen_lh),
                        _L("VFA test"), wxICON_INFORMATION | wxOK);
                    msg_dlg.ShowModal();
                } else if (!candidates.empty()) {
                    // Even the smallest available layer height cannot reach the end speed; propose a lower end speed
                    // based on that layer height, the line width and the maximum volumetric speed.
                    const double min_lh    = candidates.front();
                    const double reachable = speed_limit_for_lh(min_lh);
                    double new_end = std::floor(reachable / m_params.step) * m_params.step; // snap down to a step multiple
                    if (new_end < m_params.start + m_params.step)
                        new_end = m_params.start + m_params.step;
                    MessageDialog msg_dlg(nullptr,
                        wxString::Format(_L("Even at the smallest layer height used by this printer's profiles (%.2f mm) the "
                                            "end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed "
                                            "(%.1f mm³/s).\n\n"
                                            "The layer height will be set to %.2f mm and the end speed lowered to %.0f mm/s.\n\n"
                                            "Continue?"),
                                         min_lh, m_params.end, max_vol_speed, min_lh, new_end),
                        _L("VFA test"), wxICON_WARNING | wxYES_NO | wxNO_DEFAULT);
                    if (msg_dlg.ShowModal() != wxID_YES)
                        return;
                    m_params.end              = new_end;
                    m_params.vfa_layer_height = min_lh;
                } else {
                    // No compatible process profiles to draw layer heights from: warn and let the user decide.
                    if (!confirm_clamp(_L("Continue anyway?")))
                        return;
                }
            } else {
                // Auto-adjust off, or resizing disabled (which forbids changing the layer height): just warn.
                if (!confirm_clamp(m_params.nozzle_based_resize
                        ? _L("Enable \"Auto-adjust\" to fix this automatically, or continue anyway?")
                        : _L("Enable \"Auto-scale for nozzle\" and \"Auto-adjust\" to fix this automatically, or continue anyway?")))
                    return;
            }
        }
    }
 
    m_params.mode = CalibMode::Calib_VFA_Tower;
    m_plater->calib_VFA(m_params);
    EndModal(wxID_OK);
}

References _L, Slic3r::Calib_VFA_Tower, Slic3r::GUI::DPIDialog::EndModal(), m_cbAutoAdjust, m_cbResize, m_params, m_plater, m_tiEnd, m_tiStart, m_tiStep, Slic3r::Flow::mm3_per_mm(), Slic3r::nozzle_diameter(), Slic3r::GUI::printer_config(), Slic3r::GUI::DPIAware< P >::ShowModal(), Slic3r::ConfigOptionSingle< T >::value, and Slic3r::vfa_base_nozzle_diameter.

Referenced by VFA_Test_Dlg().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ on_sys_color_changed()

virtual void Slic3r::GUI::DPIAware< wxDialog >::on_sys_color_changed ( )

inlineprotectedvirtualinherited

Reimplemented in PrintHostQueueDialog, Slic3r::GUI::ColorPickerDialog, Slic3r::GUI::ConfigWizard, Slic3r::GUI::DesignTextDialog, Slic3r::GUI::DiffPresetDialog, Slic3r::GUI::EditGCodeDialog, Slic3r::GUI::MultiMachinePickPage, Slic3r::GUI::ObjectTableDialog, Slic3r::GUI::PhysicalPrinterDialog, Slic3r::GUI::PrintHostQueueDialog, Slic3r::GUI::PublishSettingsDialog, Slic3r::GUI::SavePresetDialog, Slic3r::GUI::SendMultiMachinePage, and Slic3r::GUI::UnsavedChangesDialog.

226{};

◆ prev_scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::prev_scale_factor ( ) const

inlineinherited

196{ return m_prev_scale_factor; }

◆ rescale()

void Slic3r::GUI::DPIAware< wxDialog >::rescale ( const wxRect & suggested_rect )

inlineprivateinherited

    {
        this->Freeze();
 
        m_force_rescale = false;
 
        // set normal application font as a current window font
        m_normal_font = this->GetFont();
 
        update_em_unit();
 
        // rescale missed controls sizes and images
        on_dpi_changed(suggested_rect);
 
        this->Layout();
        this->Thaw();
 
        // reset previous scale factor from current scale factor value
        m_prev_scale_factor = m_scale_factor;
    }

◆ scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::scale_factor ( ) const

inlineinherited

195{ return m_scale_factor; }

◆ set_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::set_em_unit ( int v )

inlineinherited

200{ m_em_unit = v; }

◆ set_prev_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_prev_scale_factor ( float v )

inlineinherited

199{ m_prev_scale_factor = v; }

◆ set_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_scale_factor ( float v )

inlineinherited

198{ m_scale_factor = v; }

◆ ShowModal()

int Slic3r::GUI::DPIAware< wxDialog >::ShowModal ( )

inlineinherited

    {
        dialogStack.push_front(this);
        int r = wxDialog::ShowModal();
        dialogStack.pop_front();
        return r;
    }

Referenced by Slic3r::GUI::EditFilamentPresetDialog::delete_preset(), Slic3r::GUI::SingleChoiceDialog::GetSingleChoiceIndex(), Slic3r::GUI::ConfirmBeforeSendDialog::on_show(), Slic3r::GUI::PrivacyUpdateDialog::on_show(), Slic3r::GUI::AMSMaterialsSetting::Popup(), Slic3r::GUI::ExtrusionCalibration::Popup(), Slic3r::GUI::ObjectTableDialog::Popup(), Slic3r::GUI::ConfigWizard::run(), Slic3r::GUI::GuideFrame::run(), Slic3r::GUI::MultiNozzleSyncDialog::ShowModal(), Slic3r::GUI::RichMessageDialog::ShowModal(), Slic3r::GUI::TextureImportDialog::ShowModal(), and Slic3r::GUI::UnsavedChangesDialog::ShowModal().

Here is the caller graph for this function:

◆ update_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::update_em_unit ( )

inlineprivateinherited

    {
        // Linux specific issue : get_dpi_for_window(this) still doesn't responce to the Display's scale in new wxWidgets(3.1.3).
        // So, calculate the m_em_unit value from the font size, as before
#if !defined(__WXGTK__)
        m_em_unit = std::max<size_t>(10, 10.0f * m_scale_factor);
#else
        // initialize default width_unit according to the width of the one symbol ("m") of the currently active font of this window.
        m_em_unit = std::max<size_t>(10, this->GetTextExtent("m").x - 1);
#endif // __WXGTK__
    }

Member Data Documentation

◆ m_can_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_can_rescale

privateinherited

235{ true };

◆ m_cbAutoAdjust

CheckBox* Slic3r::GUI::VFA_Test_Dlg::m_cbAutoAdjust

protected

Referenced by VFA_Test_Dlg(), and on_start().

◆ m_cbResize

CheckBox* Slic3r::GUI::VFA_Test_Dlg::m_cbResize

protected

Referenced by VFA_Test_Dlg(), and on_start().

◆ m_em_unit

int Slic3r::GUI::DPIAware< wxDialog >::m_em_unit

privateinherited

◆ m_force_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_force_rescale

privateinherited

236{ false };

◆ m_new_font_point_size

int Slic3r::GUI::DPIAware< wxDialog >::m_new_font_point_size

privateinherited

◆ m_normal_font

wxFont Slic3r::GUI::DPIAware< wxDialog >::m_normal_font

privateinherited

◆ m_params

Calib_Params Slic3r::GUI::VFA_Test_Dlg::m_params

protected

Referenced by on_start().

◆ m_plater

Plater* Slic3r::GUI::VFA_Test_Dlg::m_plater

protected

Referenced by VFA_Test_Dlg(), and on_start().

◆ m_prev_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_prev_scale_factor

privateinherited

◆ m_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_scale_factor

privateinherited

◆ m_tiEnd

TextInput* Slic3r::GUI::VFA_Test_Dlg::m_tiEnd

protected

Referenced by VFA_Test_Dlg(), and on_start().

◆ m_tiStart

TextInput* Slic3r::GUI::VFA_Test_Dlg::m_tiStart

protected

Referenced by VFA_Test_Dlg(), and on_start().

◆ m_tiStep

TextInput* Slic3r::GUI::VFA_Test_Dlg::m_tiStep

protected

Referenced by VFA_Test_Dlg(), and on_start().

The documentation for this class was generated from the following files:

/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/calib_dlg.hpp
/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/calib_dlg.cpp

	OrcaSlicer latest OrcaSlicer

Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ VFA_Test_Dlg()

◆ ~VFA_Test_Dlg()

Member Function Documentation

◆ em_unit()

◆ enable_force_rescale()

◆ EndModal()

◆ force_rescale()

◆ is_new_scale_factor()

◆ normal_font()

◆ on_dpi_changed()

◆ on_start()

◆ on_sys_color_changed()

◆ prev_scale_factor()

◆ rescale()

◆ scale_factor()

◆ set_em_unit()

◆ set_prev_scale_factor()

◆ set_scale_factor()

◆ ShowModal()

◆ update_em_unit()

Member Data Documentation

◆ m_can_rescale

◆ m_cbAutoAdjust

◆ m_cbResize

◆ m_em_unit

◆ m_force_rescale

◆ m_new_font_point_size

◆ m_normal_font

◆ m_params

◆ m_plater

◆ m_prev_scale_factor

◆ m_scale_factor

◆ m_tiEnd

◆ m_tiStart

◆ m_tiStep