Slic3r::GUI::ParamsDialog Class Reference

#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/ParamsDialog.hpp>

Inheritance diagram for Slic3r::GUI::ParamsDialog:

Collaboration diagram for Slic3r::GUI::ParamsDialog:

Public Member Functions
	ParamsDialog (wxWindow *parent)
ParamsPanel *	panel ()
void	Popup ()
void	set_editing_filament_id (std::string id)
void	EndModal (int retCode) override
float	scale_factor () const
float	prev_scale_factor () const
void	set_scale_factor (float v)
void	set_prev_scale_factor (float v)
void	set_em_unit (int v)
bool	force_rescale () const
int	em_unit () const
const wxFont &	normal_font () const
void	enable_force_rescale ()
int	ShowModal ()

Protected Member Functions
void	on_dpi_changed (const wxRect &suggested_rect) override
virtual void	on_sys_color_changed ()

Private Member Functions
void	update_em_unit ()
bool	is_new_scale_factor () const
void	rescale (const wxRect &suggested_rect)

Private Attributes
std::string	m_editing_filament_id
bool	m_initial_multi_bed_types = false
ParamsPanel *	m_panel
wxWindowDisabler *	m_winDisabler = nullptr
float	m_scale_factor
int	m_em_unit
wxFont	m_normal_font
float	m_prev_scale_factor
bool	m_can_rescale
bool	m_force_rescale
int	m_new_font_point_size

Detailed Description

Constructor & Destructor Documentation

ParamsDialog()

Slic3r::GUI::ParamsDialog::ParamsDialog

(

wxWindow *

parent

)

  : DPIDialog(parent, wxID_ANY,  "", wxDefaultPosition,
    wxDefaultSize, wxCAPTION | wxCLOSE_BOX | wxRESIZE_BORDER)
{
  m_panel = new ParamsPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxBK_LEFT | wxTAB_TRAVERSAL);
  auto* topsizer = new wxBoxSizer(wxVERTICAL);
  topsizer->Add(m_panel, 1, wxALL | wxEXPAND, 0, NULL);
 
  SetSizerAndFit(topsizer);
  SetSize({75 * em_unit(), 60 * em_unit()});
 
  Layout();
  Center();
    Bind(wxEVT_SHOW, [this](auto &event) {
        if (IsShown()) {
            m_winDisabler = new wxWindowDisabler(this);
        } else {
            delete m_winDisabler;
            m_winDisabler = nullptr;
        }
    });
  Bind(wxEVT_CLOSE_WINDOW, [this](auto& event) {
#if 0
    auto tab = dynamic_cast<Tab *>(m_panel->get_current_tab());
        if (event.CanVeto() && tab->m_presets->current_is_dirty()) {
      bool ok = tab->may_discard_current_dirty_preset();
      if (!ok)
        event.Veto();
            else {
                tab->m_presets->discard_current_changes();
                tab->load_current_preset();
                Hide();
            }
        } else {
            Hide();
        }
#else
        auto tab = dynamic_cast<Tab *>(m_panel->get_current_tab());
        // ORCA: Validate filament temperature pairs before closing the material settings dialog.
        if (tab && !tab->validate_filament_temperature_pairs()) {
            if (event.CanVeto())
                event.Veto();
            return;
        }
 
        Hide();
        if (tab && tab->type() == Preset::TYPE_PRINTER) {
            // Normalize only after the dialog closes, when the final capability is known.
            auto &preset_bundle = *wxGetApp().preset_bundle;
            const bool supports_multiple_bed_types = preset_bundle.is_bbl_vendor() ||
                preset_bundle.printers.get_edited_preset().config.opt_bool("support_multi_bed_types");
            if (m_initial_multi_bed_types != supports_multiple_bed_types)
                wxGetApp().plater()->normalize_bed_types(true);
        }
 
        if (!m_editing_filament_id.empty()) {
            Filamentinformation *filament_info = new Filamentinformation();
            filament_info->filament_id        = m_editing_filament_id;
            wxQueueEvent(wxGetApp().plater(), new SimpleEvent(EVT_MODIFY_FILAMENT, filament_info));
            m_editing_filament_id.clear();
        }
#endif
        wxGetApp().sidebar().finish_param_edit();
    });
}

References Slic3r::Center, Slic3r::GUI::DPIAware< wxDialog >::em_unit(), Slic3r::GUI::Filamentinformation::filament_id, m_editing_filament_id, m_initial_multi_bed_types, m_panel, m_winDisabler, Slic3r::GUI::plater(), Slic3r::Preset::TYPE_PRINTER, and wxWindowDisabler.

Here is the call graph for this function:

Member Function Documentation

em_unit()

int Slic3r::GUI::DPIAware< wxDialog >::em_unit ( ) const

inlineinherited

{ return m_em_unit; }

Referenced by Slic3r::GUI::AuxiliaryDialog::AuxiliaryDialog(), Slic3r::GUI::CopyrightsDialog::CopyrightsDialog(), Slic3r::GUI::DesignTextDialog::DesignTextDialog(), Slic3r::GUI::EditGCodeDialog::EditGCodeDialog(), Slic3r::GUI::FileArchiveDialog::FileArchiveDialog(), Slic3r::GUI::MsgNoUpdates::MsgNoUpdates(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), Slic3r::GUI::OAuthDialog::OAuthDialog(), Slic3r::GUI::ParamsDialog::ParamsDialog(), Slic3r::GUI::PhysicalPrinterDialog::PhysicalPrinterDialog(), Slic3r::GUI::SettingsDialog::SettingsDialog(), anonymous_namespace{3DPrinterOS.cpp}::TokenAuthDialog::TokenAuthDialog(), anonymous_namespace{3DPrinterOS.cpp}::UploadOptionsDialog::UploadOptionsDialog(), Slic3r::GUI::PublishSettingsDialog::add_row_ui(), Slic3r::GUI::DiffPresetDialog::complete_dialog_creation(), Slic3r::GUI::DiffPresetDialog::create_edit_sizer(), Slic3r::GUI::DiffPresetDialog::create_presets_sizer(), Slic3r::GUI::DiffPresetDialog::create_tree(), Slic3r::GUI::ElegooPrintHostSendDialog::init(), Slic3r::GUI::FlashforgePrintHostSendDialog::init(), Slic3r::GUI::PrintHostSendDialog::init(), Slic3r::GUI::AboutDialog::on_dpi_changed(), Slic3r::GUI::AuxiliaryDialog::on_dpi_changed(), Slic3r::GUI::BedShapeDialog::on_dpi_changed(), Slic3r::GUI::ConfigWizard::on_dpi_changed(), Slic3r::GUI::CopyrightsDialog::on_dpi_changed(), Slic3r::GUI::DiffPresetDialog::on_dpi_changed(), Slic3r::GUI::EditGCodeDialog::on_dpi_changed(), Slic3r::GUI::FileArchiveDialog::on_dpi_changed(), Slic3r::GUI::OAuthDialog::on_dpi_changed(), Slic3r::GUI::ObjectTableDialog::on_dpi_changed(), Slic3r::GUI::ParamsDialog::on_dpi_changed(), Slic3r::GUI::PhysicalPrinterDialog::on_dpi_changed(), Slic3r::GUI::PrintHostQueueDialog::on_dpi_changed(), Slic3r::GUI::PurgeModeDialog::on_dpi_changed(), Slic3r::GUI::SavePresetDialog::on_dpi_changed(), Slic3r::GUI::SendSystemInfoDialog::on_dpi_changed(), Slic3r::GUI::SettingsDialog::on_dpi_changed(), and Slic3r::GUI::UnsavedChangesDialog::on_dpi_changed().

Here is the caller graph for this function:

enable_force_rescale()

void Slic3r::GUI::DPIAware< wxDialog >::enable_force_rescale ( )

inlineinherited

{ m_force_rescale = true; }

EndModal()

void Slic3r::GUI::DPIDialog::EndModal ( int retCode )

inlineoverrideinherited

    {
        if (!dialogStack.empty() && dialogStack.front() != this) {
            // This is a bug in wxWidgets
            // when the dialog is not top modal dialog, EndModal() just hide dialog without quit 
            // the modal event loop. And the modal event loop blocks us from bottom widgets.
            // Solution: let user click it manually or close outside. FIXME
            BOOST_LOG_TRIVIAL(warning) << "DPIAware::EndModal Error: dialogStack is not empty, but top dialog is not this one. retCode=" << retCode;
            return;
        }
 
        return wxDialog::EndModal(retCode);
    }

References Slic3r::GUI::dialogStack.

Referenced by Slic3r::GUI::CloneDialog::CloneDialog(), Slic3r::GUI::ConfigWizard::ConfigWizard(), Slic3r::GUI::CreatePresetSuccessfulDialog::CreatePresetSuccessfulDialog(), Slic3r::GUI::DeleteConfirmDialog::DeleteConfirmDialog(), Slic3r::GUI::DesignVariableDialog::DesignVariableDialog(), Slic3r::GUI::anonymous_namespace{PrintHostDialogs.cpp}::FlashforgeSlotDialog::FlashforgeSlotDialog(), Slic3r::GUI::GuideFrame::GuideFrame(), Slic3r::GUI::InputIpAddressDialog::InputIpAddressDialog(), Slic3r::GUI::ManualNozzleCountDialog::ManualNozzleCountDialog(), Slic3r::GUI::MsgUpdateConfig::MsgUpdateConfig(), Slic3r::GUI::MsgUpdateForced::MsgUpdateForced(), Slic3r::GUI::MultiChoiceDialog::MultiChoiceDialog(), Slic3r::GUI::NetworkErrorDialog::NetworkErrorDialog(), Slic3r::GUI::NetworkPluginRestartDialog::NetworkPluginRestartDialog(), Slic3r::GUI::PartSkipConfirmDialog::PartSkipConfirmDialog(), Slic3r::GUI::PhysicalPrinterDialog::PhysicalPrinterDialog(), Slic3r::GUI::PlateNameEditDialog::PlateNameEditDialog(), Slic3r::GUI::PlateSettingsDialog::PlateSettingsDialog(), Slic3r::GUI::PublishSettingsDialog::PublishSettingsDialog(), Slic3r::GUI::SelectMachineDialog::SelectMachineDialog(), Slic3r::GUI::SendFailedConfirm::SendFailedConfirm(), Slic3r::GUI::SendSystemInfoDialog::SendSystemInfoDialog(), Slic3r::GUI::ShortcutCaptureDialog::ShortcutCaptureDialog(), Slic3r::GUI::SingleChoiceDialog::SingleChoiceDialog(), StepMeshDialog::StepMeshDialog(), Slic3r::GUI::SyncAmsInfoDialog::SyncAmsInfoDialog(), anonymous_namespace{3DPrinterOS.cpp}::TokenAuthDialog::TokenAuthDialog(), Slic3r::GUI::UpdatePluginDialog::UpdatePluginDialog(), Slic3r::GUI::UpdateVersionDialog::UpdateVersionDialog(), Slic3r::GUI::wgtDeviceNozzleRackUpgradeDlg::wgtDeviceNozzleRackUpgradeDlg(), Slic3r::GUI::SavePresetDialog::accept(), Slic3r::GUI::MsgDialog::add_button(), Slic3r::GUI::TipsDialog::add_button(), Slic3r::GUI::FilamentPickerDialog::BindEvents(), Slic3r::GUI::PluginPickerDialog::build_capability_ui(), Slic3r::GUI::BedShapeDialog::build_dialog(), Slic3r::GUI::PluginPickerDialog::build_ui(), Slic3r::GUI::UnsavedChangesDialog::close(), Slic3r::GUI::FileArchiveDialog::create_btn_sizer(), Slic3r::GUI::ColorDecomposeDialog::create_button_panel(), Slic3r::GUI::MixedFilamentDialog::create_button_panel(), Slic3r::GUI::CreateFilamentPresetDialog::create_dialog_buttons(), Slic3r::GUI::CreatePresetForPrinterDialog::create_dialog_buttons(), Slic3r::GUI::EditFilamentPresetDialog::create_dialog_buttons(), Slic3r::GUI::ExportConfigsDialog::create_dialog_buttons(), Slic3r::GUI::PreferencesDialog::create_item_language_combobox(), Slic3r::GUI::PreferencesDialog::create_item_region_combobox(), Slic3r::GUI::PreferencesDialog::create_items(), Slic3r::GUI::CreatePrinterPresetDialog::create_page1_dialog_buttons(), Slic3r::GUI::CreatePrinterPresetDialog::create_page2_dialog_buttons(), Slic3r::GUI::ExportConfigsDialog::data_init(), Slic3r::GUI::WebDialog::destroy_silently(), Slic3r::GUI::EditFilamentPresetDialog::edit_preset(), Slic3r::GUI::ConnectPrinterDialog::end_modal(), Slic3r::GUI::PrintHostSendDialog::EndModal(), Slic3r::GUI::ColorPickerDialog::finish(), Slic3r::GUI::WebDialog::finish(), Slic3r::GUI::Newer3mfVersionDialog::get_btn_sizer(), Slic3r::GUI::ScoreDialog::get_button_sizer(), Slic3r::GUI::WebViewHostDialog::handle_common_script_command(), Slic3r::GUI::ExportPresetBundleDialog::InitExportData(), Slic3r::GUI::SelectMachineDialog::navigate_to_timelapse_page(), Slic3r::GUI::BindMachineDialog::on_bind_success(), Slic3r::GUI::ConnectPrinterDialog::on_button_confirm(), Slic3r::GUI::RecenterDialog::on_button_confirm(), Slic3r::GUI::BindMachineDialog::on_cancel(), Slic3r::GUI::EditCalibrationHistoryDialog::on_cancel(), Slic3r::GUI::InputIpAddressDialog::on_cancel(), Slic3r::GUI::NewCalibrationHistoryDialog::on_cancel(), Slic3r::GUI::OAuthDialog::on_cancel(), Slic3r::GUI::PingCodeBindDialog::on_cancel(), Slic3r::GUI::SelectMachineDialog::on_cancel(), Slic3r::GUI::SendToPrinterDialog::on_cancel(), Slic3r::GUI::SyncAmsInfoDialog::on_cancel(), Slic3r::GUI::UnBindMachineDialog::on_cancel(), Slic3r::GUI::WebDialog::on_close_window(), Slic3r::GUI::NetworkPluginDownloadDialog::on_dont_ask(), Slic3r::GUI::NetworkPluginDownloadDialog::on_download(), Slic3r::GUI::EditDevNameDialog::on_edit_name(), Slic3r::GUI::ConfirmBeforeSendDialog::on_hide(), Slic3r::GUI::PrivacyUpdateDialog::on_hide(), Slic3r::GUI::ShortcutCaptureDialog::on_key(), Slic3r::GUI::TextureImportDialog::on_ok_clicked(), Slic3r::GUI::FileArchiveDialog::on_open_button(), Slic3r::GUI::NetworkPluginDownloadDialog::on_remind_later(), Slic3r::GUI::ProjectDropDialog::on_select_cancel(), Slic3r::GUI::SavePresetDialog::on_select_cancel(), Slic3r::GUI::ProjectDropDialog::on_select_ok(), Slic3r::GUI::SendMultiMachinePage::on_send(), Slic3r::GUI::NetworkPluginDownloadDialog::on_skip(), Slic3r::GUI::TextureImportDialog::on_skip_clicked(), Slic3r::GUI::NetworkPluginDownloadDialog::on_skip_version(), Slic3r::GUI::Cornering_Test_Dlg::on_start(), Slic3r::GUI::FlowRateCalibrationDialog::on_start(), Slic3r::GUI::Input_Shaping_Damp_Test_Dlg::on_start(), Slic3r::GUI::Input_Shaping_Freq_Test_Dlg::on_start(), Slic3r::GUI::MaxVolumetricSpeed_Test_Dlg::on_start(), Slic3r::GUI::PA_Calibration_Dlg::on_start(), Slic3r::GUI::Retraction_Test_Dlg::on_start(), Slic3r::GUI::Temp_Calibration_Dlg::on_start(), Slic3r::GUI::VFA_Test_Dlg::on_start(), Slic3r::GUI::CalibrationDialog::on_start_calibration(), Slic3r::GUI::UnBindMachineDialog::on_unbind_printer(), Slic3r::GUI::PartSkipDialog::OnApplyDialog(), anonymous_namespace{3DPrinterOS.cpp}::TokenAuthDialog::OnCancel(), Slic3r::GUI::AboutDialog::onCloseDialog(), Slic3r::GUI::CopyrightsDialog::onCloseDialog(), Slic3r::GUI::MultiNozzleSyncDialog::OnRackStatusReadingFinished(), Slic3r::GUI::GuideFrame::OnScriptMessage(), Slic3r::GUI::InputIpAddressDialog::OnTimer(), Slic3r::GUI::KBShortcutsDialog::open_mouse_preferences(), Slic3r::GUI::TroubleshootDialog::PackAll(), Slic3r::GUI::TroubleshootDialog::RebuildSystemProfiles(), Slic3r::GUI::SpeedDialWebDialog::run_action(), Slic3r::GUI::OAuthDialog::Show(), Slic3r::GUI::MultiNozzleSyncDialog::UpdateButton(), and Slic3r::GUI::CreatePrinterPresetDialog::validate_input_valid().

force_rescale()

bool Slic3r::GUI::DPIAware< wxDialog >::force_rescale ( ) const

inlineinherited

{ return m_force_rescale; }

is_new_scale_factor()

bool Slic3r::GUI::DPIAware< wxDialog >::is_new_scale_factor ( ) const

inlineprivateinherited

{ return fabs(m_scale_factor - m_prev_scale_factor) > 0.001; }

normal_font()

const wxFont & Slic3r::GUI::DPIAware< wxDialog >::normal_font ( ) const

inlineinherited

{ return m_normal_font; }

Referenced by Slic3r::GUI::AboutDialog::AboutDialog(), Slic3r::GUI::ConfigWizard::ConfigWizard(), Slic3r::GUI::CopyrightsDialog::CopyrightsDialog(), Slic3r::GUI::EditGCodeDialog::EditGCodeDialog(), Slic3r::GUI::anonymous_namespace{PrintHostDialogs.cpp}::FlashforgeSlotDialog::FlashforgeSlotDialog(), Slic3r::GUI::KBShortcutsDialog::KBShortcutsDialog(), Slic3r::GUI::MsgDialog::MsgDialog(), Slic3r::GUI::OAuthDialog::OAuthDialog(), Slic3r::GUI::PhysicalPrinterDialog::PhysicalPrinterDialog(), Slic3r::GUI::SelectMachineDialog::SelectMachineDialog(), Slic3r::GUI::SendSystemInfoDialog::SendSystemInfoDialog(), Slic3r::GUI::SendToPrinterDialog::SendToPrinterDialog(), Slic3r::GUI::SettingsDialog::SettingsDialog(), Slic3r::GUI::ShortcutCaptureDialog::ShortcutCaptureDialog(), Slic3r::GUI::SyncAmsInfoDialog::SyncAmsInfoDialog(), anonymous_namespace{3DPrinterOS.cpp}::TokenAuthDialog::TokenAuthDialog(), Slic3r::GUI::TroubleshootDialog::TroubleshootDialog(), anonymous_namespace{3DPrinterOS.cpp}::UploadOptionsDialog::UploadOptionsDialog(), Slic3r::GUI::SavePresetDialog::build(), Slic3r::GUI::BedShapeDialog::build_dialog(), and Slic3r::GUI::PhysicalPrinterDialog::build_printhost_settings().

Here is the caller graph for this function:

on_dpi_changed()

void Slic3r::GUI::ParamsDialog::on_dpi_changed ( const wxRect & suggested_rect )

overrideprotectedvirtual

Implements Slic3r::GUI::DPIAware< wxDialog >.

{
  Fit();
  SetSize({75 * em_unit(), 60 * em_unit()});
  m_panel->msw_rescale();
  Refresh();
}

References Slic3r::GUI::DPIAware< wxDialog >::em_unit(), and m_panel.

Here is the call graph for this function:

on_sys_color_changed()

virtual void Slic3r::GUI::DPIAware< wxDialog >::on_sys_color_changed ( )

inlineprotectedvirtualinherited

Reimplemented in PrintHostQueueDialog, Slic3r::GUI::ColorPickerDialog, Slic3r::GUI::ConfigWizard, Slic3r::GUI::DesignTextDialog, Slic3r::GUI::DiffPresetDialog, Slic3r::GUI::EditGCodeDialog, Slic3r::GUI::MultiMachinePickPage, Slic3r::GUI::ObjectTableDialog, Slic3r::GUI::PhysicalPrinterDialog, Slic3r::GUI::PrintHostQueueDialog, Slic3r::GUI::PublishSettingsDialog, Slic3r::GUI::SavePresetDialog, Slic3r::GUI::SendMultiMachinePage, and Slic3r::GUI::UnsavedChangesDialog.

{};

panel()

ParamsPanel * Slic3r::GUI::ParamsDialog::panel ( )

inline

{ return m_panel; }

References m_panel.

Popup()

void Slic3r::GUI::ParamsDialog::Popup

(

)

{
    wxGetApp().UpdateDlgDarkUI(this);
#ifdef __WIN32__
    Reparent(wxGetApp().mainframe);
#endif
    Center();
    if (m_panel && m_panel->get_current_tab()) {
        bool just_edit = false;
        if (!m_editing_filament_id.empty()) just_edit = true;
        auto *tab = dynamic_cast<Tab *>(m_panel->get_current_tab());
        tab->set_just_edit(just_edit);
        if (tab->type() == Preset::TYPE_PRINTER) {
            // Remember the initial capability and compare it when the dialog closes.
            // Bambu profiles support multiple bed types even when this option is unset.
            auto &preset_bundle = *wxGetApp().preset_bundle;
            m_initial_multi_bed_types = preset_bundle.is_bbl_vendor() ||
                preset_bundle.printers.get_edited_preset().config.opt_bool("support_multi_bed_types");
        }
    }
    Show();
}

References Slic3r::Center, m_editing_filament_id, m_initial_multi_bed_types, m_panel, Slic3r::GUI::Tab::set_just_edit(), and Slic3r::Preset::TYPE_PRINTER.

Here is the call graph for this function:

prev_scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::prev_scale_factor ( ) const

inlineinherited

{ return m_prev_scale_factor; }

rescale()

void Slic3r::GUI::DPIAware< wxDialog >::rescale ( const wxRect & suggested_rect )

inlineprivateinherited

    {
        this->Freeze();
 
        m_force_rescale = false;
 
        // set normal application font as a current window font
        m_normal_font = this->GetFont();
 
        update_em_unit();
 
        // rescale missed controls sizes and images
        on_dpi_changed(suggested_rect);
 
        this->Layout();
        this->Thaw();
 
        // reset previous scale factor from current scale factor value
        m_prev_scale_factor = m_scale_factor;
    }

scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::scale_factor ( ) const

inlineinherited

{ return m_scale_factor; }

set_editing_filament_id()

void Slic3r::GUI::ParamsDialog::set_editing_filament_id ( std::string id )

inline

{ m_editing_filament_id = id; }

References m_editing_filament_id.

set_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::set_em_unit ( int v )

inlineinherited

{ m_em_unit = v; }

set_prev_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_prev_scale_factor ( float v )

inlineinherited

{ m_prev_scale_factor = v; }

set_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_scale_factor ( float v )

inlineinherited

{ m_scale_factor = v; }

ShowModal()

int Slic3r::GUI::DPIAware< wxDialog >::ShowModal ( )

inlineinherited

    {
        dialogStack.push_front(this);
        int r = wxDialog::ShowModal();
        dialogStack.pop_front();
        return r;
    }

Referenced by Slic3r::GUI::EditFilamentPresetDialog::delete_preset(), Slic3r::GUI::SingleChoiceDialog::GetSingleChoiceIndex(), Slic3r::GUI::ConfirmBeforeSendDialog::on_show(), Slic3r::GUI::PrivacyUpdateDialog::on_show(), Slic3r::GUI::AMSMaterialsSetting::Popup(), Slic3r::GUI::ExtrusionCalibration::Popup(), Slic3r::GUI::ObjectTableDialog::Popup(), Slic3r::GUI::ConfigWizard::run(), Slic3r::GUI::GuideFrame::run(), Slic3r::GUI::MultiNozzleSyncDialog::ShowModal(), Slic3r::GUI::RichMessageDialog::ShowModal(), Slic3r::GUI::TextureImportDialog::ShowModal(), and Slic3r::GUI::UnsavedChangesDialog::ShowModal().

Here is the caller graph for this function:

update_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::update_em_unit ( )

inlineprivateinherited

    {
        // Linux specific issue : get_dpi_for_window(this) still doesn't responce to the Display's scale in new wxWidgets(3.1.3).
        // So, calculate the m_em_unit value from the font size, as before
#if !defined(__WXGTK__)
        m_em_unit = std::max<size_t>(10, 10.0f * m_scale_factor);
#else
        // initialize default width_unit according to the width of the one symbol ("m") of the currently active font of this window.
        m_em_unit = std::max<size_t>(10, this->GetTextExtent("m").x - 1);
#endif // __WXGTK__
    }

Member Data Documentation

m_can_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_can_rescale

privateinherited

{ true };

m_editing_filament_id

std::string Slic3r::GUI::ParamsDialog::m_editing_filament_id

private

Referenced by ParamsDialog(), Popup(), and set_editing_filament_id().

m_em_unit

int Slic3r::GUI::DPIAware< wxDialog >::m_em_unit

privateinherited

m_force_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_force_rescale

privateinherited

{ false };

m_initial_multi_bed_types

bool Slic3r::GUI::ParamsDialog::m_initial_multi_bed_types = false

private

Referenced by ParamsDialog(), and Popup().

m_new_font_point_size

int Slic3r::GUI::DPIAware< wxDialog >::m_new_font_point_size

privateinherited

m_normal_font

wxFont Slic3r::GUI::DPIAware< wxDialog >::m_normal_font

privateinherited

m_panel

ParamsPanel* Slic3r::GUI::ParamsDialog::m_panel

private

Referenced by ParamsDialog(), on_dpi_changed(), panel(), and Popup().

m_prev_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_prev_scale_factor

privateinherited

m_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_scale_factor

privateinherited

m_winDisabler

wxWindowDisabler* Slic3r::GUI::ParamsDialog::m_winDisabler = nullptr

private

Referenced by ParamsDialog().

---

The documentation for this class was generated from the following files:

• /home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/ParamsDialog.hpp
• /home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/ParamsDialog.cpp