#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/calib_dlg.hpp>

Inheritance diagram for Slic3r::GUI::Temp_Calibration_Dlg:

Collaboration diagram for Slic3r::GUI::Temp_Calibration_Dlg:

Public Member Functions
	Temp_Calibration_Dlg (wxWindow parent, wxWindowID id, Plater plater)
	~Temp_Calibration_Dlg ()
void	on_dpi_changed (const wxRect &suggested_rect) override
void	EndModal (int retCode) override
float	scale_factor () const
float	prev_scale_factor () const
void	set_scale_factor (float v)
void	set_prev_scale_factor (float v)
void	set_em_unit (int v)
bool	force_rescale () const
int	em_unit () const
const wxFont &	normal_font () const
void	enable_force_rescale ()
int	ShowModal ()

Protected Member Functions
virtual void	on_start (wxCommandEvent &event)
virtual void	on_filament_type_changed (wxCommandEvent &event)
void	on_show (wxShowEvent &event)
virtual void	on_sys_color_changed ()

Protected Attributes
Calib_Params	m_params
RadioGroup *	m_rbFilamentType
RadioGroup *	m_rbModel = nullptr
wxStaticBoxSizer *	m_model_box = nullptr
TextInput *	m_tiStart
TextInput *	m_tiEnd
TextInput *	m_tiStep
CheckBox *	m_cbResize
Plater *	m_plater

Private Member Functions
void	update_em_unit ()
bool	is_new_scale_factor () const
void	rescale (const wxRect &suggested_rect)

Private Attributes
float	m_scale_factor
int	m_em_unit
wxFont	m_normal_font
float	m_prev_scale_factor
bool	m_can_rescale
bool	m_force_rescale
int	m_new_font_point_size

Detailed Description

Constructor & Destructor Documentation

◆ Temp_Calibration_Dlg()

Slic3r::GUI::Temp_Calibration_Dlg::Temp_Calibration_Dlg	(	wxWindow *	parent,
		wxWindowID	id,
		Plater *	plater )

    : DPIDialog(parent, id, _L("Temperature calibration"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE), m_plater(plater)
{
    SetBackgroundColour(*wxWHITE); // make sure background color set for dialog
    SetForegroundColour(wxColour("#363636"));
    SetFont(Label::Body_14);
 
    wxBoxSizer* v_sizer = new wxBoxSizer(wxVERTICAL);
    SetSizer(v_sizer);
 
    // Method Radio Group
    auto labeled_box_method = new LabeledStaticBox(this, _L("Filament type"));
    auto method_box = new wxStaticBoxSizer(labeled_box_method, wxHORIZONTAL);
 
  m_rbFilamentType = new RadioGroup(this, { _L("PLA"), _L("ABS/ASA"), _L("PETG"), _L("PCTG"), _L("TPU"), _L("PA-CF"), _L("PET-CF"), _L("Custom") }, wxVERTICAL, 2);
    method_box->Add(m_rbFilamentType, 0, wxALL | wxEXPAND, FromDIP(4));
    v_sizer->Add(method_box, 0, wxTOP | wxRIGHT | wxLEFT | wxEXPAND, FromDIP(10));
 
    // Belt temperature-tower model: Standard (sectioned tower) vs Overhang (engraved
    // inverted-L provini that stress overhang quality per temperature). Only affects
    // belt printers; the upright tower ignores it, so the picker is only shown on
    // belts. The dialog is cached across printer switches, so visibility is toggled
    // per-show in on_show() rather than gated here at construction time.
    auto labeled_box_model = new LabeledStaticBox(this, _L("Test model"));
    m_model_box = new wxStaticBoxSizer(labeled_box_model, wxHORIZONTAL);
    m_rbModel = new RadioGroup(this, { _L_CONTEXT("Standard", "Test model"), _L_CONTEXT("Overhang", "Test model") }, wxVERTICAL);
    m_model_box->Add(m_rbModel, 0, wxALL | wxEXPAND, FromDIP(4));
    v_sizer->Add(m_model_box, 0, wxTOP | wxRIGHT | wxLEFT | wxEXPAND, FromDIP(10));
 
    // Settings
    wxString start_temp_str = _L("Start temp: ");
    wxString end_temp_str   = _L("End temp: ");
    wxString temp_step_str  = _L("Temp step: ");
    int text_max = GetTextMax(this, std::vector<wxString>{start_temp_str, end_temp_str, temp_step_str});
 
    auto st_size = wxSize(text_max, -1);
    auto ti_size = FromDIP(wxSize(120, -1));
 
    LabeledStaticBox* stb = new LabeledStaticBox(this, _L("Settings"));
    wxStaticBoxSizer* settings_sizer = new wxStaticBoxSizer(stb, wxVERTICAL);
 
    settings_sizer->AddSpacer(FromDIP(5));
 
    // start temp
    auto start_temp_sizer = new wxBoxSizer(wxHORIZONTAL);
    auto start_temp_text = new wxStaticText(this, wxID_ANY, start_temp_str, wxDefaultPosition, st_size, wxALIGN_LEFT);
    m_tiStart = new TextInput(this, std::to_string(230), _L("\u2103" /* °C */), "", wxDefaultPosition, ti_size);
    m_tiStart->GetTextCtrl()->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
    start_temp_sizer->Add(start_temp_text, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    start_temp_sizer->Add(m_tiStart      , 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    settings_sizer->Add(start_temp_sizer, 0, wxLEFT, FromDIP(3));
 
    // end temp
    auto end_temp_sizer = new wxBoxSizer(wxHORIZONTAL);
    auto end_temp_text = new wxStaticText(this, wxID_ANY, end_temp_str, wxDefaultPosition, st_size, wxALIGN_LEFT);
    m_tiEnd = new TextInput(this, std::to_string(190), _L("\u2103" /* °C */), "", wxDefaultPosition, ti_size);
    m_tiEnd->GetTextCtrl()->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
    end_temp_sizer->Add(end_temp_text, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    end_temp_sizer->Add(m_tiEnd      , 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    settings_sizer->Add(end_temp_sizer, 0, wxLEFT, FromDIP(3));
 
    // temp step
    auto temp_step_sizer = new wxBoxSizer(wxHORIZONTAL);
    auto temp_step_text = new wxStaticText(this, wxID_ANY, temp_step_str, wxDefaultPosition, st_size, wxALIGN_LEFT);
    m_tiStep = new TextInput(this, wxString::FromDouble(5), _L("\u2103" /* °C */), "", wxDefaultPosition, ti_size);
    m_tiStep->GetTextCtrl()->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
    m_tiStep->Enable(false);
    temp_step_sizer->Add(temp_step_text, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    temp_step_sizer->Add(m_tiStep      , 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(2));
    settings_sizer->Add(temp_step_sizer, 0, wxLEFT, FromDIP(3));
 
    // Resize the model to the nozzle diameter (recommended)
    m_cbResize = add_scale_checkbox(this, settings_sizer);
 
    settings_sizer->AddSpacer(FromDIP(5));
 
    v_sizer->Add(settings_sizer, 0, wxTOP | wxRIGHT | wxLEFT | wxEXPAND, FromDIP(10));
    v_sizer->AddSpacer(FromDIP(5));
 
    auto dlg_btns = new DialogButtons(this, {"OK"});
 
    auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
 
    auto wiki_btn = new Button(this, "", "toolbar_wiki", 0, 15);
    auto wiki_url = "https://www.orcaslicer.com/wiki/temp_calib";
    wiki_btn->SetToolTip(_L("Wiki Guide") + "\n" + wiki_url);
    wiki_btn->SetStyle(ButtonStyle::Confirm, ButtonType::Circle);
    wiki_btn->SetCanFocus(false);
    wiki_btn->Bind(wxEVT_LEFT_DOWN, ([wiki_url](auto& e) {wxLaunchDefaultBrowser(wiki_url);}));
 
    bottom_sizer->Add(wiki_btn, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(10));
    bottom_sizer->AddStretchSpacer();
    bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
    v_sizer->Add(bottom_sizer, 0, wxEXPAND);
 
    dlg_btns->GetOK()->Bind(wxEVT_BUTTON, &Temp_Calibration_Dlg::on_start, this);
 
    m_rbFilamentType->Connect(wxEVT_COMMAND_RADIOBOX_SELECTED, wxCommandEventHandler(Temp_Calibration_Dlg::on_filament_type_changed), NULL, this);
 
    // Refresh the belt-only model picker on every show — the dialog is cached and
    // reused across printer switches.
    this->Connect(wxEVT_SHOW, wxShowEventHandler(Temp_Calibration_Dlg::on_show));
    m_model_box->ShowItems(is_belt_printer_selected());
 
    wxGetApp().UpdateDlgDarkUI(this);
 
    Layout();
    Fit();
    v_sizer->SetSizeHints(this);
 
    auto validate_text = [](TextInput* ti){
        unsigned long t = 0;
        if(!ti->GetTextCtrl()->GetValue().ToULong(&t))
            return;
        if(t> 500 || t < 155){
            // TRN %s is the temperature unit
            MessageDialog msg_dlg(nullptr, wxString::Format(_L("Supported range: 170%s - 500%s"),
                _L("\u2103" /* °C */), _L("\u2103" /* °C */)),
                wxEmptyString, wxICON_WARNING | wxOK);
            msg_dlg.ShowModal();
            if(t > 500)
                t = 500;
            else
                t = 155;
        }
        t = (t / 5) * 5;
        ti->GetTextCtrl()->SetValue(std::to_string(t));
    };
 
    m_tiStart->GetTextCtrl()->Bind(wxEVT_KILL_FOCUS, [&](wxFocusEvent &e) {
        validate_text(this->m_tiStart);
        e.Skip();
        });
 
    m_tiEnd->GetTextCtrl()->Bind(wxEVT_KILL_FOCUS, [&](wxFocusEvent &e) {
        validate_text(this->m_tiEnd);
        e.Skip();
        });
 
 
}

References _L, _L_CONTEXT, Label::Body_14, Circle, Confirm, Slic3r::GUI::DialogButtons::GetOK(), m_cbResize, m_model_box, m_plater, m_rbFilamentType, m_rbModel, m_tiEnd, m_tiStart, m_tiStep, on_filament_type_changed(), on_show(), on_start(), Slic3r::GUI::plater(), Slic3r::GUI::DPIAware< P >::ShowModal(), and wxStaticText.

Here is the call graph for this function:

◆ ~Temp_Calibration_Dlg()

Slic3r::GUI::Temp_Calibration_Dlg::~Temp_Calibration_Dlg ( )

                                            {
    // Disconnect Events
    m_rbFilamentType->Disconnect(wxEVT_COMMAND_RADIOBOX_SELECTED, wxCommandEventHandler(Temp_Calibration_Dlg::on_filament_type_changed), NULL, this);
}

References m_rbFilamentType, and on_filament_type_changed().

Here is the call graph for this function:

Member Function Documentation

◆ em_unit()

int Slic3r::GUI::DPIAware< wxDialog >::em_unit ( ) const

inlineinherited

203{ return m_em_unit; }

Slic3r::GUI::DPIAware

Definition GUI_Utils.hpp:107

Here is the caller graph for this function:

◆ enable_force_rescale()

void Slic3r::GUI::DPIAware< wxDialog >::enable_force_rescale ( )

inlineinherited

206{ m_force_rescale = true; }

◆ EndModal()

void Slic3r::GUI::DPIDialog::EndModal ( int retCode )

inlineoverrideinherited

    {
        if (!dialogStack.empty() && dialogStack.front() != this) {
            // This is a bug in wxWidgets
            // when the dialog is not top modal dialog, EndModal() just hide dialog without quit 
            // the modal event loop. And the modal event loop blocks us from bottom widgets.
            // Solution: let user click it manually or close outside. FIXME
            BOOST_LOG_TRIVIAL(warning) << "DPIAware::EndModal Error: dialogStack is not empty, but top dialog is not this one. retCode=" << retCode;
            return;
        }
 
        return wxDialog::EndModal(retCode);
    }

References Slic3r::GUI::dialogStack.

◆ force_rescale()

bool Slic3r::GUI::DPIAware< wxDialog >::force_rescale ( ) const

inlineinherited

201{ return m_force_rescale; }

◆ is_new_scale_factor()

bool Slic3r::GUI::DPIAware< wxDialog >::is_new_scale_factor ( ) const

inlineprivateinherited

262{ return fabs(m_scale_factor - m_prev_scale_factor) > 0.001; }

◆ normal_font()

const wxFont & Slic3r::GUI::DPIAware< wxDialog >::normal_font ( ) const

inlineinherited

205{ return m_normal_font; }

Here is the caller graph for this function:

◆ on_dpi_changed()

void Slic3r::GUI::Temp_Calibration_Dlg::on_dpi_changed ( const wxRect & suggested_rect )

overridevirtual

Implements Slic3r::GUI::DPIAware< wxDialog >.

                                                                      {
    this->Refresh();
    Fit();
 
}

◆ on_filament_type_changed()

void Slic3r::GUI::Temp_Calibration_Dlg::on_filament_type_changed ( wxCommandEvent & event )

protectedvirtual

                                                                         {
    int selection = event.GetSelection();
    unsigned long start = 0, end = 0;
    switch(selection)
    {
        case tABS_ASA:
            start = 270;
            end = 230;
            break;
        case tPETG:
            start = 250;
            end = 230;
            break;
        case tPCTG:
            start = 280;
            end = 240;
            break;
        case tTPU:
        case tTPU_AMS:
            start = 240;
            end = 210;
            break;
        case tPA_CF:
            start = 320;
            end = 280;
            break;
        case tPET_CF:
            start = 320;
            end = 280;
            break;
        case tPLA:
        case tCustom:
            start = 230;
            end = 190;
            break;
    }
 
    m_tiEnd->GetTextCtrl()->SetValue(std::to_string(end));
    m_tiStart->GetTextCtrl()->SetValue(std::to_string(start));
    event.Skip();
}

References m_tiEnd, m_tiStart, Slic3r::GUI::tABS_ASA, Slic3r::GUI::tCustom, Slic3r::GUI::tPA_CF, Slic3r::GUI::tPCTG, Slic3r::GUI::tPET_CF, Slic3r::GUI::tPETG, Slic3r::GUI::tPLA, Slic3r::GUI::tTPU, and Slic3r::GUI::tTPU_AMS.

Referenced by Temp_Calibration_Dlg(), and ~Temp_Calibration_Dlg().

Here is the caller graph for this function:

◆ on_show()

void Slic3r::GUI::Temp_Calibration_Dlg::on_show ( wxShowEvent & event )

protected

                                                     {
    // ORCA-Belt: the dialog is cached across printer switches, so refresh the
    // belt-only "Test model" picker on every show. The Overhang model only
    // applies to belt printers; hide it (and resize the dialog) otherwise.
    const bool belt = is_belt_printer_selected();
    if (m_model_box->AreAnyItemsShown() != belt) {
        m_model_box->ShowItems(belt);
        Layout();
        Fit();
        GetSizer()->SetSizeHints(this);
    }
    event.Skip();
}

References m_model_box.

Referenced by Temp_Calibration_Dlg().

Here is the caller graph for this function:

◆ on_start()

void Slic3r::GUI::Temp_Calibration_Dlg::on_start ( wxCommandEvent & event )

protectedvirtual

                                                         {
    bool read_long = false;
    unsigned long start=0,end=0;
    read_long = m_tiStart->GetTextCtrl()->GetValue().ToULong(&start);
    read_long = read_long && m_tiEnd->GetTextCtrl()->GetValue().ToULong(&end);
 
    if (!read_long || start > 500 || end < 155  || end > (start - 5)) {
        MessageDialog msg_dlg(nullptr, _L("Please input valid values:\nStart temp: <= 500\nEnd temp: >= 155\nStart temp >= End temp + 5"), wxEmptyString, wxICON_WARNING | wxOK);
        msg_dlg.ShowModal();
        return;
    }
    m_params.start = start;
    m_params.end = end;
    m_params.nozzle_based_resize = m_cbResize->GetValue();
    m_params.mode = CalibMode::Calib_Temp_Tower;
    // Picker only exists on belt printers; default non-belt to the Standard model.
    m_params.test_model = m_rbModel ? m_rbModel->GetSelection() : 0;
    m_plater->calib_temp(m_params);
    EndModal(wxID_OK);
 
}

References _L, Slic3r::Calib_Temp_Tower, Slic3r::GUI::DPIDialog::EndModal(), m_cbResize, m_params, m_plater, m_rbModel, m_tiEnd, m_tiStart, and Slic3r::GUI::DPIAware< P >::ShowModal().

Referenced by Temp_Calibration_Dlg().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ on_sys_color_changed()

virtual void Slic3r::GUI::DPIAware< wxDialog >::on_sys_color_changed ( )

inlineprotectedvirtualinherited

Reimplemented in PrintHostQueueDialog, Slic3r::GUI::ColorPickerDialog, Slic3r::GUI::ConfigWizard, Slic3r::GUI::DesignTextDialog, Slic3r::GUI::DiffPresetDialog, Slic3r::GUI::EditGCodeDialog, Slic3r::GUI::MultiMachinePickPage, Slic3r::GUI::ObjectTableDialog, Slic3r::GUI::PhysicalPrinterDialog, Slic3r::GUI::PrintHostQueueDialog, Slic3r::GUI::PublishSettingsDialog, Slic3r::GUI::SavePresetDialog, Slic3r::GUI::SendMultiMachinePage, and Slic3r::GUI::UnsavedChangesDialog.

226{};

◆ prev_scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::prev_scale_factor ( ) const

inlineinherited

196{ return m_prev_scale_factor; }

◆ rescale()

void Slic3r::GUI::DPIAware< wxDialog >::rescale ( const wxRect & suggested_rect )

inlineprivateinherited

    {
        this->Freeze();
 
        m_force_rescale = false;
 
        // set normal application font as a current window font
        m_normal_font = this->GetFont();
 
        update_em_unit();
 
        // rescale missed controls sizes and images
        on_dpi_changed(suggested_rect);
 
        this->Layout();
        this->Thaw();
 
        // reset previous scale factor from current scale factor value
        m_prev_scale_factor = m_scale_factor;
    }

◆ scale_factor()

float Slic3r::GUI::DPIAware< wxDialog >::scale_factor ( ) const

inlineinherited

195{ return m_scale_factor; }

◆ set_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::set_em_unit ( int v )

inlineinherited

200{ m_em_unit = v; }

◆ set_prev_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_prev_scale_factor ( float v )

inlineinherited

199{ m_prev_scale_factor = v; }

◆ set_scale_factor()

void Slic3r::GUI::DPIAware< wxDialog >::set_scale_factor ( float v )

inlineinherited

198{ m_scale_factor = v; }

◆ ShowModal()

int Slic3r::GUI::DPIAware< wxDialog >::ShowModal ( )

inlineinherited

    {
        dialogStack.push_front(this);
        int r = wxDialog::ShowModal();
        dialogStack.pop_front();
        return r;
    }

Referenced by Slic3r::GUI::EditFilamentPresetDialog::delete_preset(), Slic3r::GUI::SingleChoiceDialog::GetSingleChoiceIndex(), Slic3r::GUI::ConfirmBeforeSendDialog::on_show(), Slic3r::GUI::PrivacyUpdateDialog::on_show(), Slic3r::GUI::AMSMaterialsSetting::Popup(), Slic3r::GUI::ExtrusionCalibration::Popup(), Slic3r::GUI::ObjectTableDialog::Popup(), Slic3r::GUI::ConfigWizard::run(), Slic3r::GUI::GuideFrame::run(), Slic3r::GUI::MultiNozzleSyncDialog::ShowModal(), Slic3r::GUI::RichMessageDialog::ShowModal(), Slic3r::GUI::TextureImportDialog::ShowModal(), and Slic3r::GUI::UnsavedChangesDialog::ShowModal().

Here is the caller graph for this function:

◆ update_em_unit()

void Slic3r::GUI::DPIAware< wxDialog >::update_em_unit ( )

inlineprivateinherited

    {
        // Linux specific issue : get_dpi_for_window(this) still doesn't responce to the Display's scale in new wxWidgets(3.1.3).
        // So, calculate the m_em_unit value from the font size, as before
#if !defined(__WXGTK__)
        m_em_unit = std::max<size_t>(10, 10.0f * m_scale_factor);
#else
        // initialize default width_unit according to the width of the one symbol ("m") of the currently active font of this window.
        m_em_unit = std::max<size_t>(10, this->GetTextExtent("m").x - 1);
#endif // __WXGTK__
    }

Member Data Documentation

◆ m_can_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_can_rescale

privateinherited

235{ true };

◆ m_cbResize

CheckBox* Slic3r::GUI::Temp_Calibration_Dlg::m_cbResize

protected

Referenced by Temp_Calibration_Dlg(), and on_start().

◆ m_em_unit

int Slic3r::GUI::DPIAware< wxDialog >::m_em_unit

privateinherited

◆ m_force_rescale

bool Slic3r::GUI::DPIAware< wxDialog >::m_force_rescale

privateinherited

236{ false };

◆ m_model_box

wxStaticBoxSizer* Slic3r::GUI::Temp_Calibration_Dlg::m_model_box = nullptr

protected

Referenced by Temp_Calibration_Dlg(), and on_show().

◆ m_new_font_point_size

int Slic3r::GUI::DPIAware< wxDialog >::m_new_font_point_size

privateinherited

◆ m_normal_font

wxFont Slic3r::GUI::DPIAware< wxDialog >::m_normal_font

privateinherited

◆ m_params

Calib_Params Slic3r::GUI::Temp_Calibration_Dlg::m_params

protected

Referenced by on_start().

◆ m_plater

Plater* Slic3r::GUI::Temp_Calibration_Dlg::m_plater

protected

Referenced by Temp_Calibration_Dlg(), and on_start().

◆ m_prev_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_prev_scale_factor

privateinherited

◆ m_rbFilamentType

RadioGroup* Slic3r::GUI::Temp_Calibration_Dlg::m_rbFilamentType

protected

Referenced by Temp_Calibration_Dlg(), and ~Temp_Calibration_Dlg().

◆ m_rbModel

RadioGroup* Slic3r::GUI::Temp_Calibration_Dlg::m_rbModel = nullptr

protected

Referenced by Temp_Calibration_Dlg(), and on_start().

◆ m_scale_factor

float Slic3r::GUI::DPIAware< wxDialog >::m_scale_factor

privateinherited

◆ m_tiEnd

TextInput* Slic3r::GUI::Temp_Calibration_Dlg::m_tiEnd

protected

Referenced by Temp_Calibration_Dlg(), on_filament_type_changed(), and on_start().

◆ m_tiStart

TextInput* Slic3r::GUI::Temp_Calibration_Dlg::m_tiStart

protected

Referenced by Temp_Calibration_Dlg(), on_filament_type_changed(), and on_start().

◆ m_tiStep

TextInput* Slic3r::GUI::Temp_Calibration_Dlg::m_tiStep

protected

Referenced by Temp_Calibration_Dlg().

The documentation for this class was generated from the following files:

/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/calib_dlg.hpp
/home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/calib_dlg.cpp

	OrcaSlicer latest OrcaSlicer

Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ Temp_Calibration_Dlg()

◆ ~Temp_Calibration_Dlg()

Member Function Documentation

◆ em_unit()

◆ enable_force_rescale()

◆ EndModal()

◆ force_rescale()

◆ is_new_scale_factor()

◆ normal_font()

◆ on_dpi_changed()

◆ on_filament_type_changed()

◆ on_show()

◆ on_start()

◆ on_sys_color_changed()

◆ prev_scale_factor()

◆ rescale()

◆ scale_factor()

◆ set_em_unit()

◆ set_prev_scale_factor()

◆ set_scale_factor()

◆ ShowModal()

◆ update_em_unit()

Member Data Documentation

◆ m_can_rescale

◆ m_cbResize

◆ m_em_unit

◆ m_force_rescale

◆ m_model_box

◆ m_new_font_point_size

◆ m_normal_font

◆ m_params

◆ m_plater

◆ m_prev_scale_factor

◆ m_rbFilamentType

◆ m_rbModel

◆ m_scale_factor

◆ m_tiEnd

◆ m_tiStart

◆ m_tiStep