Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings Struct Reference

#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/libslic3r/Support/TreeSupportCommon.hpp>

Collaboration diagram for Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings:

Public Member Functions
	TreeSupportMeshGroupSettings ()=default
	TreeSupportMeshGroupSettings (const PrintObject &print_object)

Public Attributes
coord_t	layer_height { scaled<coord_t>(0.15) }
coord_t	resolution { scaled<coord_t>(0.025) }
coord_t	min_feature_size { scaled<coord_t>(0.1) }
double	support_angle { 50. * M_PI / 180. }
coord_t	support_line_width { scaled<coord_t>(0.4) }
coord_t	support_roof_line_width { scaled<coord_t>(0.4) }
bool	support_bottom_enable { false }
coord_t	support_bottom_height { scaled<coord_t>(1.) }
bool	support_material_buildplate_only { false }
coord_t	support_xy_distance { scaled<coord_t>(0.7) }
coord_t	support_xy_distance_1st_layer { scaled<coord_t>(0.7) }
coord_t	support_xy_distance_overhang { scaled<coord_t>(0.2) }
coord_t	support_top_distance { scaled<coord_t>(0.1) }
coord_t	support_bottom_distance { scaled<coord_t>(0.1) }
coord_t	support_interface_skip_height { scaled<coord_t>(0.3) }
bool	support_roof_enable { false }
coord_t	support_roof_layers { 2 }
bool	support_floor_enable { false }
coord_t	support_floor_layers { 2 }
double	minimum_roof_area { scaled<double>(scaled<double>(1.)) }
std::vector< double >	support_roof_angles {}
SupportMaterialInterfacePattern	support_roof_pattern { smipAuto }
SupportMaterialPattern	support_pattern { smpRectilinear }
coord_t	support_line_spacing { scaled<coord_t>(2.66 - 0.4) }
coord_t	support_bottom_offset { scaled<coord_t>(0.) }
int	support_wall_count { 1 }
coord_t	support_roof_line_distance { scaled<coord_t>(0.4) }
coord_t	minimum_support_area { scaled<coord_t>(0.) }
coord_t	minimum_bottom_area { scaled<coord_t>(1.0) }
coord_t	support_offset { scaled<coord_t>(0.) }
double	support_tree_angle { 60. * M_PI / 180. }
double	support_tree_branch_diameter_angle { 5. * M_PI / 180. }
coord_t	support_tree_branch_distance { scaled<coord_t>(1.) }
coord_t	support_tree_branch_diameter { scaled<coord_t>(2.) }
double	support_tree_angle_slow { 50. * M_PI / 180. }
coord_t	support_tree_max_diameter_increase_by_merges_when_support_to_model { scaled<coord_t>(1.0) }
coord_t	support_tree_min_height_to_model { scaled<coord_t>(1.0) }
coord_t	support_tree_bp_diameter { scaled<coord_t>(7.5) }
double	support_tree_top_rate { 15. }
coord_t	support_tree_tip_diameter { scaled<coord_t>(0.4) }

Detailed Description

Constructor & Destructor Documentation

TreeSupportMeshGroupSettings() [1/2]

Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::TreeSupportMeshGroupSettings ( )

default

TreeSupportMeshGroupSettings() [2/2]

Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::TreeSupportMeshGroupSettings ( const PrintObject & print_object )

inlineexplicit

    {
        const PrintConfig       &print_config       = print_object.print()->config();
        const PrintObjectConfig &config             = print_object.config();
        const SlicingParameters &slicing_params     = print_object.slicing_parameters();
    //    const std::vector<unsigned int>  printing_extruders = print_object.object_extruders();
 
        // Support must be enabled and set to Tree style.
        //assert(config.support_material);
        //assert(config.support_material_style == smsTree || config.support_material_style == smsOrganic);
 
        // Calculate maximum external perimeter width over all printing regions, taking into account the default layer height.
        coordf_t external_perimeter_width = 0.;
        for (size_t region_id = 0; region_id < print_object.num_printing_regions(); ++ region_id) {
            const PrintRegion &region = print_object.printing_region(region_id);
            external_perimeter_width = std::max<coordf_t>(external_perimeter_width, region.flow(print_object, frExternalPerimeter, config.layer_height).width());
        }
 
        this->layer_height              = scaled<coord_t>(config.layer_height.value);
        this->resolution                = scaled<coord_t>(print_config.resolution.value);
        // Arache feature
        this->min_feature_size          = scaled<coord_t>(config.min_feature_size.value);
        // +1 makes the threshold inclusive
        this->support_angle             = 0.5 * M_PI - std::clamp<double>((config.support_threshold_angle + 1) * M_PI / 180., 0., 0.5 * M_PI);
        this->support_line_width        = support_material_flow(&print_object, config.layer_height).scaled_width();
        this->support_roof_line_width   = support_material_interface_flow(&print_object, config.layer_height).scaled_width();
        const int bottom_interface_layers = number_of_support_interface_bottom_layers(config);
        this->support_bottom_enable     = bottom_interface_layers > 0;
        this->support_bottom_height     = this->support_bottom_enable ?
            bottom_interface_layers * this->layer_height :
            0;
        this->support_material_buildplate_only = config.support_on_build_plate_only;
        this->support_xy_distance       = scaled<coord_t>(config.support_object_xy_distance.value);
        this->support_xy_distance_1st_layer = scaled<coord_t>(config.support_object_first_layer_gap.value);
        // Separation of interfaces, it is likely smaller than support_xy_distance.
        this->support_xy_distance_overhang = std::min(this->support_xy_distance, scaled<coord_t>(0.5 * external_perimeter_width));
        this->support_top_distance      = scaled<coord_t>(slicing_params.gap_support_object);
        this->support_bottom_distance   = scaled<coord_t>(slicing_params.gap_object_support);
        this->support_roof_enable       = config.support_interface_top_layers.value > 0;
        this->support_roof_layers       = config.support_interface_top_layers.value;
        this->support_floor_enable      = bottom_interface_layers > 0;
        this->support_floor_layers      = bottom_interface_layers;
        this->support_roof_pattern      = config.support_interface_pattern;
        this->support_pattern           = config.support_base_pattern;
        this->support_line_spacing      = scaled<coord_t>(config.support_base_pattern_spacing.value);
        this->support_wall_count        = std::max(1, config.tree_support_wall_count.value);  // at least 1 wall for organic tree support
        this->support_roof_line_distance = scaled<coord_t>(config.support_interface_spacing.value) + this->support_roof_line_width;
        this->support_tree_branch_distance = scaled<coord_t>(config.tree_support_branch_distance_organic.value);
        this->support_tree_angle          = std::clamp<double>(config.tree_support_branch_angle_organic * M_PI / 180., 0., 0.5 * M_PI - EPSILON);
        this->support_tree_angle_slow     = std::clamp<double>(config.tree_support_angle_slow * M_PI / 180., 0., this->support_tree_angle - EPSILON);
        this->support_tree_branch_diameter = scaled<coord_t>(config.tree_support_branch_diameter_organic.value);
        this->support_tree_branch_diameter_angle  = std::clamp<double>(config.tree_support_branch_diameter_angle * M_PI / 180., 0., 0.5 * M_PI - EPSILON);
        this->support_tree_top_rate       = config.tree_support_top_rate.value; // percent
    //    this->support_tree_tip_diameter = this->support_line_width;
        this->support_tree_tip_diameter = std::clamp(scaled<coord_t>(config.tree_support_tip_diameter.value), (coord_t)0, this->support_tree_branch_diameter);
    }

References Slic3r::Print::config(), Slic3r::PrintObject::config(), EPSILON, Slic3r::PrintRegion::flow(), Slic3r::frExternalPerimeter, Slic3r::SlicingParameters::gap_object_support, Slic3r::SlicingParameters::gap_support_object, layer_height, M_PI, min_feature_size, Slic3r::PrintObject::num_printing_regions(), Slic3r::number_of_support_interface_bottom_layers(), Slic3r::PrintObjectBaseWithState< PrintType, PrintObjectStepEnum, COUNT >::print(), Slic3r::PrintObject::printing_region(), Slic3r::PrintObjectConfig, resolution, Slic3r::scaled(), Slic3r::Flow::scaled_width(), Slic3r::PrintObject::slicing_parameters(), support_angle, support_bottom_distance, support_bottom_enable, support_bottom_height, support_floor_enable, support_floor_layers, support_line_spacing, support_line_width, support_material_buildplate_only, Slic3r::support_material_flow(), Slic3r::support_material_interface_flow(), support_pattern, support_roof_enable, support_roof_layers, support_roof_line_distance, support_roof_line_width, support_roof_pattern, support_top_distance, support_tree_angle, support_tree_angle_slow, support_tree_branch_diameter, support_tree_branch_diameter_angle, support_tree_branch_distance, support_tree_tip_diameter, support_tree_top_rate, support_wall_count, support_xy_distance, support_xy_distance_1st_layer, support_xy_distance_overhang, and Slic3r::Flow::width().

Here is the call graph for this function:

Member Data Documentation

layer_height

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::layer_height { scaled<coord_t>(0.15) }

{ scaled<coord_t>(0.15) };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::TreeModelVolumes::calculateCollision().

min_feature_size

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::min_feature_size { scaled<coord_t>(0.1) }

{ scaled<coord_t>(0.1) };

Referenced by TreeSupportMeshGroupSettings().

minimum_bottom_area

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::minimum_bottom_area { scaled<coord_t>(1.0) }

{ scaled<coord_t>(1.0) };

minimum_roof_area

double Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::minimum_roof_area { scaled<double>(scaled<double>(1.)) }

{ scaled<double>(scaled<double>(1.)) };

Referenced by Slic3r::TreeSupport3D::generate_initial_areas(), and Slic3r::TreeSupport3D::sample_overhang_area().

minimum_support_area

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::minimum_support_area { scaled<coord_t>(0.) }

{ scaled<coord_t>(0.) };

resolution

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::resolution { scaled<coord_t>(0.025) }

{ scaled<coord_t>(0.025) };

Referenced by Slic3r::TreeSupport3D::TreeModelVolumes::TreeModelVolumes(), and TreeSupportMeshGroupSettings().

support_angle

double Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_angle { 50. * M_PI / 180. }

{ 50. * M_PI / 180. };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::generate_initial_areas().

support_bottom_distance

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_bottom_distance { scaled<coord_t>(0.1) }

{ scaled<coord_t>(0.1) };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::TreeModelVolumes::calculateCollision().

support_bottom_enable

bool Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_bottom_enable { false }

{ false };

Referenced by TreeSupportMeshGroupSettings().

support_bottom_height

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_bottom_height { scaled<coord_t>(1.) }

{ scaled<coord_t>(1.) };

Referenced by TreeSupportMeshGroupSettings().

support_bottom_offset

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_bottom_offset { scaled<coord_t>(0.) }

{ scaled<coord_t>(0.) };

support_floor_enable

bool Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_floor_enable { false }

{ false };

Referenced by TreeSupportMeshGroupSettings().

support_floor_layers

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_floor_layers { 2 }

{ 2 };

Referenced by TreeSupportMeshGroupSettings().

support_interface_skip_height

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_interface_skip_height { scaled<coord_t>(0.3) }

{ scaled<coord_t>(0.3) };

support_line_spacing

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_line_spacing { scaled<coord_t>(2.66 - 0.4) }

{ scaled<coord_t>(2.66 - 0.4) };

Referenced by TreeSupportMeshGroupSettings().

support_line_width

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_line_width { scaled<coord_t>(0.4) }

{ scaled<coord_t>(0.4) };

Referenced by TreeSupportMeshGroupSettings().

support_material_buildplate_only

bool Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_material_buildplate_only { false }

{ false };

Referenced by TreeSupportMeshGroupSettings().

support_offset

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_offset { scaled<coord_t>(0.) }

{ scaled<coord_t>(0.) };

support_pattern

SupportMaterialPattern Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_pattern { smpRectilinear }

{ smpRectilinear };

Referenced by TreeSupportMeshGroupSettings().

support_roof_angles

std::vector<double> Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_roof_angles {}

{};

support_roof_enable

bool Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_roof_enable { false }

{ false };

Referenced by TreeSupportMeshGroupSettings().

support_roof_layers

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_roof_layers { 2 }

{ 2 };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::generate_initial_areas().

support_roof_line_distance

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_roof_line_distance { scaled<coord_t>(0.4) }

{ scaled<coord_t>(0.4) };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::sample_overhang_area().

support_roof_line_width

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_roof_line_width { scaled<coord_t>(0.4) }

{ scaled<coord_t>(0.4) };

Referenced by TreeSupportMeshGroupSettings().

support_roof_pattern

SupportMaterialInterfacePattern Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_roof_pattern { smipAuto }

{ smipAuto };

Referenced by TreeSupportMeshGroupSettings().

support_top_distance

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_top_distance { scaled<coord_t>(0.1) }

{ scaled<coord_t>(0.1) };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::TreeModelVolumes::calculateCollision().

support_tree_angle

double Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_angle { 60. * M_PI / 180. }

{ 60. * M_PI / 180. };

Referenced by TreeSupportMeshGroupSettings().

support_tree_angle_slow

double Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_angle_slow { 50. * M_PI / 180. }

{ 50. * M_PI / 180. };

Referenced by TreeSupportMeshGroupSettings().

support_tree_bp_diameter

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_bp_diameter { scaled<coord_t>(7.5) }

{ scaled<coord_t>(7.5) };

support_tree_branch_diameter

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_branch_diameter { scaled<coord_t>(2.) }

{ scaled<coord_t>(2.) };

Referenced by TreeSupportMeshGroupSettings().

support_tree_branch_diameter_angle

double Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_branch_diameter_angle { 5. * M_PI / 180. }

{ 5.  * M_PI / 180. };

Referenced by TreeSupportMeshGroupSettings().

support_tree_branch_distance

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_branch_distance { scaled<coord_t>(1.) }

{ scaled<coord_t>(1.) };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::sample_overhang_area().

support_tree_max_diameter_increase_by_merges_when_support_to_model

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_max_diameter_increase_by_merges_when_support_to_model { scaled<coord_t>(1.0) }

{ scaled<coord_t>(1.0) };

support_tree_min_height_to_model

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_min_height_to_model { scaled<coord_t>(1.0) }

{ scaled<coord_t>(1.0) };

support_tree_tip_diameter

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_tip_diameter { scaled<coord_t>(0.4) }

{ scaled<coord_t>(0.4) };

Referenced by TreeSupportMeshGroupSettings().

support_tree_top_rate

double Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_tree_top_rate { 15. }

{ 15. };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::generate_initial_areas().

support_wall_count

int Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_wall_count { 1 }

{ 1 };

Referenced by TreeSupportMeshGroupSettings().

support_xy_distance

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_xy_distance { scaled<coord_t>(0.7) }

{ scaled<coord_t>(0.7) };

Referenced by TreeSupportMeshGroupSettings(), and Slic3r::TreeSupport3D::TreeModelVolumes::calculateCollision().

support_xy_distance_1st_layer

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_xy_distance_1st_layer { scaled<coord_t>(0.7) }

{ scaled<coord_t>(0.7) };

Referenced by TreeSupportMeshGroupSettings().

support_xy_distance_overhang

coord_t Slic3r::TreeSupport3D::TreeSupportMeshGroupSettings::support_xy_distance_overhang { scaled<coord_t>(0.2) }

{ scaled<coord_t>(0.2) };

Referenced by TreeSupportMeshGroupSettings().

---

The documentation for this struct was generated from the following file:

• /home/runner/work/OrcaSlicer/OrcaSlicer/src/libslic3r/Support/TreeSupportCommon.hpp