Slic3r::DevPrintOptions Class Reference

#include </home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/DeviceCore/DevPrintOptions.h>

Collaboration diagram for Slic3r::DevPrintOptions:

Public Types
enum class	PurifyAirAtPrintEndState : int { PurifyAirDisable = 0 , PurifyAirByInside = 1 , PurifyAirByOutside = 2 }

Public Member Functions
	DevPrintOptions (MachineObject *obj)
void	SetPrintingSpeedLevel (DevPrintingSpeedLevel speed_level)
DevPrintingSpeedLevel	GetPrintingSpeedLevel () const
PrintOptionData *	GetDetectionOption (PrintOptionEnum print_option)
int	command_xcam_control_ai_monitoring (bool on_off, std::string lvl)
int	command_xcam_control_first_layer_inspector (bool on_off, bool print_halt)
int	command_xcam_control_buildplate_marker_detector (bool on_off)
int	command_xcam_control_auto_recovery_step_loss (bool on_off)
int	command_xcam_control_allow_prompt_sound (bool on_off)
int	command_xcam_control_filament_tangle_detect (bool on_off)
int	command_xcam_control_idelheatingprotect_detector (bool on_off)
int	command_xcam_control_build_plate_align_detector (bool on_off)
int	command_xcam_control_fod_check (bool on_off)
int	command_xcam_control_displacement_detection (bool on_off)
int	command_xcam_control_purify_air_at_print_end (int on_off)
int	command_smart_nozzle_blob_detect_mode (int mode)
int	command_snapshot_control (int on_off)
int	command_xcam_control (std::string module_name, bool on_off, MachineObject *obj, std::string lvl="")
int	command_set_printing_option (bool auto_recovery, MachineObject *obj)
int	command_set_prompt_sound (bool prompt_sound, MachineObject *obj)
int	command_set_filament_tangle_detect (bool fliament_tangle_detect, MachineObject *obj)
int	command_set_against_continued_heating_mode (bool on_off)
int	command_set_purify_air_at_print_end (PurifyAirAtPrintEndState state, MachineObject *obj)
int	command_set_snapshot_control (int on_off, MachineObject *obj)
void	parse_auto_recovery_step_loss_status (int flag)
void	parse_allow_prompt_sound_status (int flag)
void	parse_filament_tangle_detect_status (int flag)
bool	GetAiMonitoring () const
bool	GetFirstLayerInspector () const
bool	GetBuildplateMarkerDetector () const
bool	GetAutoRecoveryStepLoss () const
bool	GetAllowPromptSound () const
bool	GetFilamentTangleDetect () const
int	GetIdelHeatingProtectEenabled () const
std::string	GetAiMonitoringSensitivity () const

Private Attributes
DevPrintingSpeedLevel	m_speed_level = SPEED_LEVEL_INVALID
PrintOptionData	m_ai_monitoring_detection
PrintOptionData	m_first_layer_detection
PrintOptionData	m_buildplate_mark_detection
PrintOptionData	m_buildplate_align_detection
PrintOptionData	m_auto_recovery_detection
PrintOptionData	m_allow_prompt_sound_detection
PrintOptionData	m_filament_tangle_detection
PrintOptionData	m_idel_heating_protect_detection
PrintOptionData	m_purify_air_at_print_end
PrintOptionData	m_snapshot_detection
PrintOptionData	m_fod_check_detection
PrintOptionData	m_displacement_detection
PrintOptionData	m_smart_nozzle_blob_detection
std::map< PrintOptionEnum, PrintOptionData * >	m_detection_list
MachineObject *	m_obj

Friends
class	DevPrintOptionsParser

Detailed Description

Member Enumeration Documentation

PurifyAirAtPrintEndState

enum class Slic3r::DevPrintOptions::PurifyAirAtPrintEndState : int

strong

Enumerator
PurifyAirDisable
PurifyAirByInside
PurifyAirByOutside

                                        : int {
        PurifyAirDisable   = 0,
        PurifyAirByInside  = 1,
        PurifyAirByOutside = 2,
    };

Constructor & Destructor Documentation

DevPrintOptions()

Slic3r::DevPrintOptions::DevPrintOptions

(

MachineObject *

obj

)

                                                   : m_obj(obj)
{
    m_detection_list = {
        {PrintOptionEnum::AI_Monitoring, &m_ai_monitoring_detection},
        {PrintOptionEnum::First_Layer_Detection, &m_first_layer_detection},
        {PrintOptionEnum::Buildplate_Mark_Detection, &m_buildplate_mark_detection},
        {PrintOptionEnum::Buildplate_Align_Detection, &m_buildplate_align_detection},
        {PrintOptionEnum::Auto_Recovery_Detection, &m_auto_recovery_detection},
        {PrintOptionEnum::Allow_Prompt_Sound_Detection, &m_allow_prompt_sound_detection},
        {PrintOptionEnum::Filament_Tangle_Detection, &m_filament_tangle_detection},
        {PrintOptionEnum::Idle_Heating_Protect_Detection, &m_idel_heating_protect_detection},
        {PrintOptionEnum::Purify_Air_At_Print_End, &m_purify_air_at_print_end},
        {PrintOptionEnum::Snapshot_Detection, &m_snapshot_detection},
        {PrintOptionEnum::FOD_Check_Detection, &m_fod_check_detection},
        {PrintOptionEnum::Displacement_Detection, &m_displacement_detection},
        {PrintOptionEnum::Smart_Nozzle_Blob_Detection, &m_smart_nozzle_blob_detection},
    };
}

References Slic3r::AI_Monitoring, Slic3r::Allow_Prompt_Sound_Detection, Slic3r::Auto_Recovery_Detection, Slic3r::Buildplate_Align_Detection, Slic3r::Buildplate_Mark_Detection, Slic3r::Displacement_Detection, Slic3r::Filament_Tangle_Detection, Slic3r::First_Layer_Detection, Slic3r::FOD_Check_Detection, Slic3r::Idle_Heating_Protect_Detection, m_ai_monitoring_detection, m_allow_prompt_sound_detection, m_auto_recovery_detection, m_buildplate_align_detection, m_buildplate_mark_detection, m_detection_list, m_displacement_detection, m_filament_tangle_detection, m_first_layer_detection, m_fod_check_detection, m_idel_heating_protect_detection, m_obj, m_purify_air_at_print_end, m_smart_nozzle_blob_detection, m_snapshot_detection, Slic3r::Purify_Air_At_Print_End, Slic3r::Smart_Nozzle_Blob_Detection, and Slic3r::Snapshot_Detection.

Member Function Documentation

command_set_against_continued_heating_mode()

int Slic3r::DevPrintOptions::command_set_against_continued_heating_mode

(

bool

on_off

)

{
    json j;
    j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
    j["print"]["command"]     = "set_against_continued_heating_mode";
    j["print"]["enable"]      = on_off;
    return m_obj->publish_json(j);
}

References m_obj, and Slic3r::MachineObject::m_sequence_id.

Referenced by command_xcam_control_idelheatingprotect_detector().

Here is the caller graph for this function:

command_set_filament_tangle_detect()

int Slic3r::DevPrintOptions::command_set_filament_tangle_detect	(	bool	fliament_tangle_detect,
		MachineObject *	obj )

{
    json j;
    j["print"]["command"]                = "print_option";
    j["print"]["sequence_id"]            = std::to_string(MachineObject::m_sequence_id++);
    j["print"]["filament_tangle_detect"] = filament_tangle_detect;
 
    return obj->publish_json(j);
}

References Slic3r::MachineObject::m_sequence_id, and Slic3r::MachineObject::publish_json().

Referenced by command_xcam_control_filament_tangle_detect().

Here is the call graph for this function:

Here is the caller graph for this function:

command_set_printing_option()

int Slic3r::DevPrintOptions::command_set_printing_option	(	bool	auto_recovery,
		MachineObject *	obj )

{
    json j;
    j["print"]["command"]       = "print_option";
    j["print"]["sequence_id"]   = std::to_string(MachineObject::m_sequence_id++);
    j["print"]["option"]        = (int) auto_recovery;
    j["print"]["auto_recovery"] = auto_recovery;
 
    return obj->publish_json(j);
}

References Slic3r::MachineObject::m_sequence_id, and Slic3r::MachineObject::publish_json().

Referenced by command_xcam_control_auto_recovery_step_loss().

Here is the call graph for this function:

Here is the caller graph for this function:

command_set_prompt_sound()

int Slic3r::DevPrintOptions::command_set_prompt_sound	(	bool	prompt_sound,
		MachineObject *	obj )

{
    json j;
    j["print"]["command"]      = "print_option";
    j["print"]["sequence_id"]  = std::to_string(MachineObject::m_sequence_id++);
    j["print"]["sound_enable"] = prompt_sound;
 
    return obj->publish_json(j);
}

References Slic3r::MachineObject::m_sequence_id, and Slic3r::MachineObject::publish_json().

Referenced by command_xcam_control_allow_prompt_sound().

Here is the call graph for this function:

Here is the caller graph for this function:

command_set_purify_air_at_print_end()

int Slic3r::DevPrintOptions::command_set_purify_air_at_print_end	(	PurifyAirAtPrintEndState	state,
		MachineObject *	obj )

{
    json j;
    j["print"]["command"]     = "print_option";
    j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
    switch (state)
    {
        case PurifyAirAtPrintEndState::PurifyAirDisable:   j["print"]["air_purification"] = 0; break;
        case PurifyAirAtPrintEndState::PurifyAirByInside:  j["print"]["air_purification"] = 1; break;
        case PurifyAirAtPrintEndState::PurifyAirByOutside: j["print"]["air_purification"] = 2; break;
        default: assert(0);
    }
    return obj->publish_json(j);
}

References Slic3r::MachineObject::m_sequence_id, Slic3r::MachineObject::publish_json(), PurifyAirByInside, PurifyAirByOutside, and PurifyAirDisable.

Referenced by command_xcam_control_purify_air_at_print_end().

Here is the call graph for this function:

Here is the caller graph for this function:

command_set_snapshot_control()

int Slic3r::DevPrintOptions::command_set_snapshot_control	(	int	on_off,
		MachineObject *	obj )

{
    json j;
    j["camera"]["command"]     = "ipcam_cap_pic_set";
    j["camera"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
    j["camera"]["control"]     = on_off ? "enable" : "disable";
    return obj->publish_json(j);
}

References Slic3r::MachineObject::m_sequence_id, and Slic3r::MachineObject::publish_json().

Referenced by command_snapshot_control().

Here is the call graph for this function:

Here is the caller graph for this function:

command_smart_nozzle_blob_detect_mode()

int Slic3r::DevPrintOptions::command_smart_nozzle_blob_detect_mode

(

int

mode

)

{
    json j;
    j["print"]["command"]               = "print_option";
    j["print"]["sequence_id"]           = std::to_string(MachineObject::m_sequence_id++);
    j["print"]["nozzle_blob_detect_v2"] = mode;  // int: 0=off, 1=on, 2=auto
    m_smart_nozzle_blob_detection.current_detect_value = mode;
    m_smart_nozzle_blob_detection.detect_hold_start    = time(nullptr);
    return m_obj->publish_json(j);
}

References m_obj, Slic3r::MachineObject::m_sequence_id, and m_smart_nozzle_blob_detection.

Referenced by Slic3r::GUI::SelectMachineDialog::update_show_status().

Here is the caller graph for this function:

command_snapshot_control()

int Slic3r::DevPrintOptions::command_snapshot_control

(

int

on_off

)

{
    m_snapshot_detection.current_detect_value = on_off;
    m_snapshot_detection.detect_hold_start    = time(nullptr);
    return command_set_snapshot_control(on_off, m_obj);
}

References command_set_snapshot_control(), m_obj, and m_snapshot_detection.

Here is the call graph for this function:

command_xcam_control()

int Slic3r::DevPrintOptions::command_xcam_control	(	std::string	module_name,
		bool	on_off,
		MachineObject *	obj,
		std::string	lvl = "" )

{
    json j;
    j["xcam"]["command"]     = "xcam_control_set";
    j["xcam"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
    j["xcam"]["module_name"] = module_name;
    j["xcam"]["control"]     = on_off;
    j["xcam"]["enable"]      = on_off; // old protocol
    j["xcam"]["print_halt"]  = true;   // old protocol
    if (!lvl.empty()) { j["xcam"]["halt_print_sensitivity"] = lvl; }
    BOOST_LOG_TRIVIAL(info) << "command:xcam_control_set" << ", module_name:" << module_name << ", control:" << on_off << ", halt_print_sensitivity:" << lvl;
    return obj->publish_json(j);
}

References Slic3r::MachineObject::m_sequence_id, and Slic3r::MachineObject::publish_json().

Referenced by command_xcam_control_ai_monitoring(), command_xcam_control_build_plate_align_detector(), command_xcam_control_buildplate_marker_detector(), command_xcam_control_displacement_detection(), command_xcam_control_first_layer_inspector(), and command_xcam_control_fod_check().

Here is the call graph for this function:

Here is the caller graph for this function:

command_xcam_control_ai_monitoring()

int Slic3r::DevPrintOptions::command_xcam_control_ai_monitoring	(	bool	on_off,
		std::string	lvl )

{
    bool print_halt = (lvl == "never_halt") ? false : true;
 
    m_ai_monitoring_detection.current_detect_value             = on_off;
    m_ai_monitoring_detection.detect_hold_start                = time(nullptr);
    m_ai_monitoring_detection.current_detect_sensitivity_value = lvl;
    return command_xcam_control("printing_monitor", on_off, m_obj, lvl);
}

References command_xcam_control(), m_ai_monitoring_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_allow_prompt_sound()

int Slic3r::DevPrintOptions::command_xcam_control_allow_prompt_sound

(

bool

on_off

)

{
    m_allow_prompt_sound_detection.current_detect_value = on_off;
    m_allow_prompt_sound_detection.detect_hold_start    = time(nullptr);
    return command_set_prompt_sound(on_off, m_obj);
}

References command_set_prompt_sound(), m_allow_prompt_sound_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_auto_recovery_step_loss()

int Slic3r::DevPrintOptions::command_xcam_control_auto_recovery_step_loss

(

bool

on_off

)

{
    m_auto_recovery_detection.current_detect_value = on_off;
    m_auto_recovery_detection.detect_hold_start    = time(nullptr);
    return command_set_printing_option(on_off, m_obj);
}

References command_set_printing_option(), m_auto_recovery_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_build_plate_align_detector()

int Slic3r::DevPrintOptions::command_xcam_control_build_plate_align_detector

(

bool

on_off

)

{
    m_buildplate_align_detection.current_detect_value = on_off;
    m_buildplate_align_detection.detect_hold_start    = time(nullptr);
    return command_xcam_control("plate_offset_switch", on_off, m_obj);
}

References command_xcam_control(), m_buildplate_align_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_buildplate_marker_detector()

int Slic3r::DevPrintOptions::command_xcam_control_buildplate_marker_detector

(

bool

on_off

)

{
    m_buildplate_mark_detection.current_detect_value = on_off;
    m_buildplate_mark_detection.detect_hold_start    = time(nullptr);
    return command_xcam_control("buildplate_marker_detector", on_off ,m_obj);
}

References command_xcam_control(), m_buildplate_mark_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_displacement_detection()

int Slic3r::DevPrintOptions::command_xcam_control_displacement_detection

(

bool

on_off

)

{
    m_displacement_detection.current_detect_value = on_off;
    m_displacement_detection.detect_hold_start    = time(nullptr);
    return command_xcam_control("model_movement_check", on_off, m_obj);
}

References command_xcam_control(), m_displacement_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_filament_tangle_detect()

int Slic3r::DevPrintOptions::command_xcam_control_filament_tangle_detect

(

bool

on_off

)

{
    m_filament_tangle_detection.current_detect_value = on_off;
    m_filament_tangle_detection.detect_hold_start    = time(nullptr);
    return command_set_filament_tangle_detect(on_off, m_obj);
}

References command_set_filament_tangle_detect(), m_filament_tangle_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_first_layer_inspector()

int Slic3r::DevPrintOptions::command_xcam_control_first_layer_inspector	(	bool	on_off,
		bool	print_halt )

{
    m_first_layer_detection.current_detect_value = on_off;
    m_first_layer_detection.detect_hold_start    = time(nullptr);
    return command_xcam_control("first_layer_inspector", on_off, m_obj);
}

References command_xcam_control(), m_first_layer_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_fod_check()

int Slic3r::DevPrintOptions::command_xcam_control_fod_check

(

bool

on_off

)

{
    m_fod_check_detection.current_detect_value = on_off;
    m_fod_check_detection.detect_hold_start    = time(nullptr);
    return command_xcam_control("fod_check", on_off, m_obj);
}

References command_xcam_control(), m_fod_check_detection, and m_obj.

Here is the call graph for this function:

command_xcam_control_idelheatingprotect_detector()

int Slic3r::DevPrintOptions::command_xcam_control_idelheatingprotect_detector

(

bool

on_off

)

{
    m_idel_heating_protect_detection.current_detect_value = on_off;
    m_idel_heating_protect_detection.detect_hold_start    = time(nullptr);
    return command_set_against_continued_heating_mode(on_off);
}

References command_set_against_continued_heating_mode(), and m_idel_heating_protect_detection.

Here is the call graph for this function:

command_xcam_control_purify_air_at_print_end()

int Slic3r::DevPrintOptions::command_xcam_control_purify_air_at_print_end

(

int

on_off

)

{
    m_purify_air_at_print_end.current_detect_value = on_off;
    m_purify_air_at_print_end.detect_hold_start    = time(nullptr);
    return command_set_purify_air_at_print_end((PurifyAirAtPrintEndState) on_off, m_obj);
}

References command_set_purify_air_at_print_end(), m_obj, and m_purify_air_at_print_end.

Here is the call graph for this function:

GetAiMonitoring()

bool Slic3r::DevPrintOptions::GetAiMonitoring ( ) const

inline

{ return m_ai_monitoring_detection.current_detect_value == 1; }

References m_ai_monitoring_detection.

GetAiMonitoringSensitivity()

std::string Slic3r::DevPrintOptions::GetAiMonitoringSensitivity ( ) const

inline

{ return m_ai_monitoring_detection.current_detect_sensitivity_value; }

References m_ai_monitoring_detection.

GetAllowPromptSound()

bool Slic3r::DevPrintOptions::GetAllowPromptSound ( ) const

inline

{ return m_allow_prompt_sound_detection.current_detect_value == 1; }

References m_allow_prompt_sound_detection.

GetAutoRecoveryStepLoss()

bool Slic3r::DevPrintOptions::GetAutoRecoveryStepLoss ( ) const

inline

{ return m_auto_recovery_detection.current_detect_value == 1; }

References m_auto_recovery_detection.

GetBuildplateMarkerDetector()

bool Slic3r::DevPrintOptions::GetBuildplateMarkerDetector ( ) const

inline

{ return m_buildplate_mark_detection.current_detect_value == 1; }

References m_buildplate_mark_detection.

GetDetectionOption()

PrintOptionData * Slic3r::DevPrintOptions::GetDetectionOption

(

PrintOptionEnum

print_option

)

{
    auto it = m_detection_list.find(print_option);
    if (it != m_detection_list.end())
    {
        return it->second;
    }
    return nullptr;
}

References m_detection_list.

Referenced by Slic3r::GUI::PrintOptionsDialog::update_options(), and Slic3r::GUI::PrintOptionsDialog::update_purify_air_at_print_end().

Here is the caller graph for this function:

GetFilamentTangleDetect()

bool Slic3r::DevPrintOptions::GetFilamentTangleDetect ( ) const

inline

{ return m_filament_tangle_detection.current_detect_value == 1; }

References m_filament_tangle_detection.

GetFirstLayerInspector()

bool Slic3r::DevPrintOptions::GetFirstLayerInspector ( ) const

inline

{ return m_first_layer_detection.current_detect_value == 1; }

References m_first_layer_detection.

GetIdelHeatingProtectEenabled()

int Slic3r::DevPrintOptions::GetIdelHeatingProtectEenabled ( ) const

inline

{ return m_idel_heating_protect_detection.current_detect_value; }

References m_idel_heating_protect_detection.

GetPrintingSpeedLevel()

DevPrintingSpeedLevel Slic3r::DevPrintOptions::GetPrintingSpeedLevel ( ) const

inline

{ return m_speed_level;}

References m_speed_level.

parse_allow_prompt_sound_status()

void Slic3r::DevPrintOptions::parse_allow_prompt_sound_status

(

int

flag

)

{
    if (time(nullptr) - m_allow_prompt_sound_detection.detect_hold_start > HOLD_TIME_3SEC) {
        m_allow_prompt_sound_detection.current_detect_value = ((flag >> 17) & 0x1) != 0;
    }
}

References HOLD_TIME_3SEC, and m_allow_prompt_sound_detection.

parse_auto_recovery_step_loss_status()

void Slic3r::DevPrintOptions::parse_auto_recovery_step_loss_status

(

int

flag

)

                                                                   {
    if (time(nullptr) - m_auto_recovery_detection.detect_hold_start > HOLD_TIME_3SEC) {
        m_auto_recovery_detection.current_detect_value = ((flag >> 4) & 0x1) != 0;
    }
}

References HOLD_TIME_3SEC, and m_auto_recovery_detection.

parse_filament_tangle_detect_status()

void Slic3r::DevPrintOptions::parse_filament_tangle_detect_status

(

int

flag

)

{
    if (time(nullptr) - m_filament_tangle_detection.detect_hold_start > HOLD_TIME_3SEC) {
        m_filament_tangle_detection.current_detect_value = ((flag >> 20) & 0x1) != 0;
    }
}

References HOLD_TIME_3SEC, and m_filament_tangle_detection.

SetPrintingSpeedLevel()

void Slic3r::DevPrintOptions::SetPrintingSpeedLevel

(

DevPrintingSpeedLevel

speed_level

)

{
    if (speed_level >= SPEED_LEVEL_INVALID && speed_level < SPEED_LEVEL_COUNT)
    {
        m_speed_level = speed_level;
    }
    else
    {
        m_speed_level = SPEED_LEVEL_INVALID; // Reset to invalid if out of range
    }
}

References m_speed_level, Slic3r::SPEED_LEVEL_COUNT, and Slic3r::SPEED_LEVEL_INVALID.

Friends And Related Symbol Documentation

DevPrintOptionsParser

friend class DevPrintOptionsParser

friend

References DevPrintOptionsParser.

Referenced by DevPrintOptionsParser.

Member Data Documentation

m_ai_monitoring_detection

PrintOptionData Slic3r::DevPrintOptions::m_ai_monitoring_detection

private

Referenced by DevPrintOptions(), command_xcam_control_ai_monitoring(), GetAiMonitoring(), GetAiMonitoringSensitivity(), Slic3r::DevPrintOptionsParser::ParseDetectionV1_0(), Slic3r::DevPrintOptionsParser::ParseDetectionV1_1(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_0().

m_allow_prompt_sound_detection

PrintOptionData Slic3r::DevPrintOptions::m_allow_prompt_sound_detection

private

Referenced by DevPrintOptions(), command_xcam_control_allow_prompt_sound(), GetAllowPromptSound(), parse_allow_prompt_sound_status(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_0().

m_auto_recovery_detection

PrintOptionData Slic3r::DevPrintOptions::m_auto_recovery_detection

private

Referenced by DevPrintOptions(), command_xcam_control_auto_recovery_step_loss(), GetAutoRecoveryStepLoss(), parse_auto_recovery_step_loss_status(), Slic3r::DevPrintOptionsParser::ParseDetectionV1_2(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_0().

m_buildplate_align_detection

PrintOptionData Slic3r::DevPrintOptions::m_buildplate_align_detection

private

Referenced by DevPrintOptions(), command_xcam_control_build_plate_align_detector(), and Slic3r::DevPrintOptionsParser::Parse().

m_buildplate_mark_detection

PrintOptionData Slic3r::DevPrintOptions::m_buildplate_mark_detection

private

Referenced by DevPrintOptions(), command_xcam_control_buildplate_marker_detector(), GetBuildplateMarkerDetector(), Slic3r::DevPrintOptionsParser::ParseDetectionV1_0(), and Slic3r::DevPrintOptionsParser::ParseDetectionV1_1().

m_detection_list

std::map<PrintOptionEnum, PrintOptionData*> Slic3r::DevPrintOptions::m_detection_list

private

Referenced by DevPrintOptions(), and GetDetectionOption().

m_displacement_detection

PrintOptionData Slic3r::DevPrintOptions::m_displacement_detection

private

Referenced by DevPrintOptions(), command_xcam_control_displacement_detection(), and Slic3r::DevPrintOptionsParser::Parse().

m_filament_tangle_detection

PrintOptionData Slic3r::DevPrintOptions::m_filament_tangle_detection

private

Referenced by DevPrintOptions(), command_xcam_control_filament_tangle_detect(), GetFilamentTangleDetect(), parse_filament_tangle_detect_status(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_0().

m_first_layer_detection

PrintOptionData Slic3r::DevPrintOptions::m_first_layer_detection

private

Referenced by DevPrintOptions(), command_xcam_control_first_layer_inspector(), GetFirstLayerInspector(), Slic3r::DevPrintOptionsParser::ParseDetectionV1_0(), Slic3r::DevPrintOptionsParser::ParseDetectionV1_1(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_0().

m_fod_check_detection

PrintOptionData Slic3r::DevPrintOptions::m_fod_check_detection

private

Referenced by DevPrintOptions(), command_xcam_control_fod_check(), and Slic3r::DevPrintOptionsParser::Parse().

m_idel_heating_protect_detection

PrintOptionData Slic3r::DevPrintOptions::m_idel_heating_protect_detection

private

Referenced by DevPrintOptions(), command_xcam_control_idelheatingprotect_detector(), GetIdelHeatingProtectEenabled(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_1().

m_obj

MachineObject* Slic3r::DevPrintOptions::m_obj

private

Referenced by DevPrintOptions(), command_set_against_continued_heating_mode(), command_smart_nozzle_blob_detect_mode(), command_snapshot_control(), command_xcam_control_ai_monitoring(), command_xcam_control_allow_prompt_sound(), command_xcam_control_auto_recovery_step_loss(), command_xcam_control_build_plate_align_detector(), command_xcam_control_buildplate_marker_detector(), command_xcam_control_displacement_detection(), command_xcam_control_filament_tangle_detect(), command_xcam_control_first_layer_inspector(), command_xcam_control_fod_check(), command_xcam_control_purify_air_at_print_end(), and Slic3r::DevPrintOptionsParser::Parse().

m_purify_air_at_print_end

PrintOptionData Slic3r::DevPrintOptions::m_purify_air_at_print_end

private

Referenced by DevPrintOptions(), command_xcam_control_purify_air_at_print_end(), Slic3r::DevPrintOptionsParser::Parse(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_1().

m_smart_nozzle_blob_detection

PrintOptionData Slic3r::DevPrintOptions::m_smart_nozzle_blob_detection

private

Referenced by DevPrintOptions(), command_smart_nozzle_blob_detect_mode(), Slic3r::DevPrintOptionsParser::Parse(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_1().

m_snapshot_detection

PrintOptionData Slic3r::DevPrintOptions::m_snapshot_detection

private

Referenced by DevPrintOptions(), command_snapshot_control(), and Slic3r::DevPrintOptionsParser::ParseDetectionV2_1().

m_speed_level

DevPrintingSpeedLevel Slic3r::DevPrintOptions::m_speed_level = SPEED_LEVEL_INVALID

private

Referenced by GetPrintingSpeedLevel(), Slic3r::DevPrintOptionsParser::Parse(), and SetPrintingSpeedLevel().

---

The documentation for this class was generated from the following files:

• /home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/DeviceCore/DevPrintOptions.h
• /home/runner/work/OrcaSlicer/OrcaSlicer/src/slic3r/GUI/DeviceCore/DevPrintOptions.cpp