calib.hpp File Reference

#include "Point.hpp"
#include <math.h>
#include <cmath>
#include <cstddef>
#include <string>
#include <vector>
#include <utility>
#include <memory>
#include "GCodeWriter.hpp"
#include "PrintConfig.hpp"
#include "BoundingBox.hpp"
#include "CustomGCode.hpp"

Include dependency graph for calib.hpp:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Classes
struct	Slic3r::Calib_Params
class	Slic3r::X1CCalibInfos
struct	Slic3r::X1CCalibInfos::X1CCalibInfo
class	Slic3r::CaliPresetInfo
struct	Slic3r::PrinterCaliInfo
class	Slic3r::PACalibResult
struct	Slic3r::PACalibIndexInfo
struct	Slic3r::PACalibExtruderInfo
struct	Slic3r::PACalibTabInfo
class	Slic3r::FlowRatioCalibResult
struct	Slic3r::DrawBoxOptArgs
class	Slic3r::CalibPressureAdvance
class	Slic3r::CalibPressureAdvanceLine
struct	Slic3r::SuggestedConfigCalibPAPattern
class	Slic3r::CalibPressureAdvancePattern

Namespaces
namespace	Slic3r
	|/ Copyright (c) Prusa Research 2020 - 2023 Enrico Turri @enricoturri1966 |/ |/ PrusaSlicer is released under the terms of the AGPLv3 or higher |/

Macros
#define	calib_pressure_advance_dd

Enumerations
enum class	Slic3r::CalibMode : int {   Slic3r::Calib_None = 0 , Slic3r::Calib_PA_Line , Slic3r::Calib_PA_Pattern , Slic3r::Calib_PA_Tower ,   Slic3r::Calib_Auto_PA_Line , Slic3r::Calib_Flow_Rate , Slic3r::Calib_Temp_Tower , Slic3r::Calib_Vol_speed_Tower ,   Slic3r::Calib_VFA_Tower , Slic3r::Calib_Retraction_tower , Slic3r::Calib_Input_shaping_freq , Slic3r::Calib_Input_shaping_damp ,   Slic3r::Calib_Cornering }
enum class	Slic3r::CalibState {   Slic3r::Start = 0 , Slic3r::Preset , Slic3r::Calibration , Slic3r::CoarseSave ,   Slic3r::FineCalibration , Slic3r::Save , Slic3r::Finish }
enum	Slic3r::FlowRatioCalibrationType { Slic3r::COMPLETE_CALIBRATION = 0 , Slic3r::FINE_CALIBRATION }

Variables
static constexpr int	Slic3r::vfa_layers_per_block = 25
static constexpr double	Slic3r::vfa_base_block_height = 5.0
static constexpr double	Slic3r::vfa_base_nozzle_diameter = 0.4

---

Class Documentation

Slic3r::X1CCalibInfos

class Slic3r::X1CCalibInfos

Collaboration diagram for Slic3r::X1CCalibInfos:

Class Members
CalibMode	cali_mode { CalibMode::Calib_None }
vector< X1CCalibInfo >	calib_datas

Slic3r::X1CCalibInfos::X1CCalibInfo

struct Slic3r::X1CCalibInfos::X1CCalibInfo

Collaboration diagram for Slic3r::X1CCalibInfos::X1CCalibInfo:

Class Members
int	ams_id = 0
int	bed_temp
int	extruder_id = 0
ExtruderType	extruder_type {ExtruderType::etDirectDrive}
string	filament_id
float	flow_rate = 0.98f
float	max_volumetric_speed
float	nozzle_diameter
int	nozzle_temp
NozzleVolumeType	nozzle_volume_type = NozzleVolumeType::nvtStandard
string	setting_id
int	slot_id = 0
int	tray_id

Slic3r::CaliPresetInfo

class Slic3r::CaliPresetInfo

Collaboration diagram for Slic3r::CaliPresetInfo:

Class Members
BedType	bed_type {btDefault}
int	extruder_id = 0
string	filament_id
string	name
float	nozzle_diameter
int	nozzle_pos_id {-1}
string	nozzle_sn
NozzleVolumeType	nozzle_volume_type {nvtStandard}
string	setting_id
int	tray_id

Slic3r::PrinterCaliInfo

struct Slic3r::PrinterCaliInfo

Collaboration diagram for Slic3r::PrinterCaliInfo:

Class Members
FlowRatioCalibrationType	cache_flow_rate_calibration_type = FlowRatioCalibrationType::COMPLETE_CALIBRATION
float	cache_flow_ratio
bool	cali_finished = true
string	dev_id
vector< CaliPresetInfo >	selected_presets

Slic3r::PACalibIndexInfo

struct Slic3r::PACalibIndexInfo

Collaboration diagram for Slic3r::PACalibIndexInfo:

Class Members
int	ams_id = 0
int	cali_idx = -1
int	extruder_id = 0
string	filament_id
float	nozzle_diameter
int	nozzle_pos_id = -1
string	nozzle_sn
NozzleVolumeType	nozzle_volume_type
int	slot_id = 0
int	tray_id = 0

Slic3r::PACalibExtruderInfo

struct Slic3r::PACalibExtruderInfo

Collaboration diagram for Slic3r::PACalibExtruderInfo:

Class Members
int	extruder_id = 0
string	filament_id = ""
float	nozzle_diameter
int	nozzle_pos_id = -1
string	nozzle_sn
NozzleVolumeType	nozzle_volume_type
bool	use_extruder_id {true}
bool	use_nozzle_volume_type {true}

Slic3r::PACalibTabInfo

struct Slic3r::PACalibTabInfo

Class Members
int	extruder_id
NozzleVolumeType	nozzle_volume_type
float	pa_calib_tab_nozzle_dia

Slic3r::FlowRatioCalibResult

class Slic3r::FlowRatioCalibResult

Collaboration diagram for Slic3r::FlowRatioCalibResult:

Class Members
int	confidence
string	filament_id
float	flow_ratio
float	nozzle_diameter
string	setting_id
int	tray_id

Slic3r::SuggestedConfigCalibPAPattern

struct Slic3r::SuggestedConfigCalibPAPattern

Collaboration diagram for Slic3r::SuggestedConfigCalibPAPattern:

Class Members
const pair< string, BrimType >	brim_pair {"brim_type", BrimType::btNoBrim}
const vector< pair< string, vector< double > > >	floats_pairs {{"initial_layer_speed", {30}}}
const vector< pair< string, int > >	int_pairs {{"skirt_loops", 0}, {"wall_loops", 3}}
const vector< pair< string, double > >	nozzle_ratio_pairs {{"line_width", 112.5}, {"initial_layer_line_width", 140}}

Macro Definition Documentation

calib_pressure_advance_dd

#define calib_pressure_advance_dd