OrcaSlicer latest
OrcaSlicer
Loading...
Searching...
No Matches
Slic3r::GUI::DesignCanvas Member List

This is the complete list of members for Slic3r::GUI::DesignCanvas, including all inherited members.

add_sketch_regions(const std::vector< std::vector< std::vector< Vec2d > > > &regions)Slic3r::GUI::DesignCanvas
apply_segment_length(double len)Slic3r::GUI::DesignCanvas
apply_sketch_dimension(double v)Slic3r::GUI::DesignCanvas
bed_center() constSlic3r::GUI::DesignCanvasinline
begin_constrain(const SketchProfile &prof, const SketchPlane &plane)Slic3r::GUI::DesignCanvas
begin_constrain_entities(const std::vector< SketchEntity > &ents, const SketchPlane &plane)Slic3r::GUI::DesignCanvas
begin_fillet_gizmo(const Vec3d &body_centroid, double radius)Slic3r::GUI::DesignCanvas
begin_hole_gizmo(const SketchPlane &plane, double x, double y, double diameter, double depth, bool through)Slic3r::GUI::DesignCanvas
begin_imported_transform(int feat, const std::vector< std::vector< std::vector< Vec2d > > > &base_regions, const SketchPlane &plane, const Vec2d &offset, double scale_x, double scale_y)Slic3r::GUI::DesignCanvas
begin_move_body(int body, const Vec3d &pivot, const Transform3d &base_xform, double body_radius)Slic3r::GUI::DesignCanvas
begin_pattern_gizmo(const SketchPlane &plane, const Vec3d &body_centroid, bool circular, int count, int dir, double spacing, double angle)Slic3r::GUI::DesignCanvas
begin_revolve_gizmo(const SketchPlane &plane, const Vec2d &centroid, const Vec3d &axis_origin, const Vec3d &axis_dir, double angle, bool flip)Slic3r::GUI::DesignCanvas
begin_shell_gizmo(const Vec3d &face_centroid, const Vec3d &inward_dir, double thickness)Slic3r::GUI::DesignCanvas
begin_sketch(const SketchPlane &plane, DesignSketchTool::Mode mode)Slic3r::GUI::DesignCanvas
begin_thread_gizmo(const SketchPlane &plane, double x, double y, double radius, double height)Slic3r::GUI::DesignCanvas
body_color(int body) constSlic3r::GUI::DesignCanvas
can_redo_sketch_entity() constSlic3r::GUI::DesignCanvasinline
can_undo_sketch_entity() constSlic3r::GUI::DesignCanvasinline
cancel_sketch()Slic3r::GUI::DesignCanvas
cancel_sketch_dimension()Slic3r::GUI::DesignCanvas
clear_any_selection()Slic3r::GUI::DesignCanvas
clear_base_pick()Slic3r::GUI::DesignCanvas
clear_cut_gizmo()Slic3r::GUI::DesignCanvas
clear_datum_gizmo()Slic3r::GUI::DesignCanvas
clear_draft_gizmo()Slic3r::GUI::DesignCanvas
clear_extrude_gizmo()Slic3r::GUI::DesignCanvas
clear_fillet_gizmo()Slic3r::GUI::DesignCanvas
clear_helix_gizmo()Slic3r::GUI::DesignCanvas
clear_hole_gizmo()Slic3r::GUI::DesignCanvas
clear_loop_pick()Slic3r::GUI::DesignCanvas
clear_mesh()Slic3r::GUI::DesignCanvas
clear_move_gizmo()Slic3r::GUI::DesignCanvas
clear_pattern_gizmo()Slic3r::GUI::DesignCanvas
clear_preview()Slic3r::GUI::DesignCanvas
clear_revolve_gizmo()Slic3r::GUI::DesignCanvas
clear_rib_gizmo()Slic3r::GUI::DesignCanvas
clear_shell_gizmo()Slic3r::GUI::DesignCanvas
clear_sketch_selection()Slic3r::GUI::DesignCanvas
clear_solid_pick()Slic3r::GUI::DesignCanvas
clear_thread_gizmo()Slic3r::GUI::DesignCanvas
cutting() constSlic3r::GUI::DesignCanvas
delete_selected_sketch_entities()Slic3r::GUI::DesignCanvas
DesignCanvas(wxWindow *parent)Slic3r::GUI::DesignCanvasexplicit
drafting() constSlic3r::GUI::DesignCanvas
drawing_in_progress() constSlic3r::GUI::DesignCanvas
edit_sketch(const std::vector< SketchEntity > &entities, const std::vector< SketchEntityConstraintDef > &constraints, const SketchPlane &plane)Slic3r::GUI::DesignCanvas
edit_sketch_selection_value()Slic3r::GUI::DesignCanvas
end_constrain()Slic3r::GUI::DesignCanvas
enter_viewport()Slic3r::GUI::DesignCanvas
faces_box(std::vector< std::pair< int, int > > faces) constSlic3r::GUI::DesignCanvasinline
filleting() constSlic3r::GUI::DesignCanvas
finish_sketch()Slic3r::GUI::DesignCanvas
fit_view()Slic3r::GUI::DesignCanvas
force_repaint()Slic3r::GUI::DesignCanvas
has_any_selection() constSlic3r::GUI::DesignCanvas
holing() constSlic3r::GUI::DesignCanvas
inline_busy() constSlic3r::GUI::DesignCanvas
inline_cancel()Slic3r::GUI::DesignCanvas
inline_commit()Slic3r::GUI::DesignCanvas
inline_has_focus() constSlic3r::GUI::DesignCanvas
is_constraining() constSlic3r::GUI::DesignCanvas
is_constraining_entities() constSlic3r::GUI::DesignCanvas
is_sketching() constSlic3r::GUI::DesignCanvas
keep_segment_as_drawn()Slic3r::GUI::DesignCanvas
leave_viewport()Slic3r::GUI::DesignCanvas
live_sketch_has_work() constSlic3r::GUI::DesignCanvas
loop_pick_feature() constSlic3r::GUI::DesignCanvas
loop_pick_region() constSlic3r::GUI::DesignCanvas
m_bedSlic3r::GUI::DesignCanvasprivate
m_body_hiddenSlic3r::GUI::DesignCanvasprivate
m_body_meshesSlic3r::GUI::DesignCanvasprivate
m_body_translucentSlic3r::GUI::DesignCanvasprivate
m_body_visibleSlic3r::GUI::DesignCanvasprivate
m_camera_swappedSlic3r::GUI::DesignCanvasprivate
m_canvasSlic3r::GUI::DesignCanvasprivate
m_canvas_widgetSlic3r::GUI::DesignCanvasprivate
m_collapse_toolbarSlic3r::GUI::DesignCanvasprivate
m_color_bodiesSlic3r::GUI::DesignCanvasprivate
m_ctx_boundSlic3r::GUI::DesignCanvasprivate
m_ctx_pressSlic3r::GUI::DesignCanvasprivate
m_ctx_travelledSlic3r::GUI::DesignCanvasprivate
m_hl_body_targetSlic3r::GUI::DesignCanvasprivate
m_hl_body_toolSlic3r::GUI::DesignCanvasprivate
m_hud_lastSlic3r::GUI::DesignCanvasprivate
m_inline_editorSlic3r::GUI::DesignCanvasprivate
m_lit_facesSlic3r::GUI::DesignCanvasprivate
m_modelSlic3r::GUI::DesignCanvasprivate
m_on_context_menuSlic3r::GUI::DesignCanvasprivate
m_on_sketch_commitSlic3r::GUI::DesignCanvasprivate
m_on_sketch_entities_commitSlic3r::GUI::DesignCanvasprivate
m_on_solid_selection_changedSlic3r::GUI::DesignCanvasprivate
m_parked_cameraSlic3r::GUI::DesignCanvasprivate
m_section_onSlic3r::GUI::DesignCanvasprivate
m_sketch_toolSlic3r::GUI::DesignCanvasprivate
m_split_pendingSlic3r::GUI::DesignCanvasprivate
m_status_hud_colourSlic3r::GUI::DesignCanvasprivate
m_status_hud_lastSlic3r::GUI::DesignCanvasprivate
m_sw_glSlic3r::GUI::DesignCanvasprivate
m_tri_faceSlic3r::GUI::DesignCanvasprivate
m_volumesSlic3r::GUI::DesignCanvasprivate
m_xray_focusSlic3r::GUI::DesignCanvasprivate
mcp_sketch_tool()Slic3r::GUI::DesignCanvasinline
mcp_sketch_tool() constSlic3r::GUI::DesignCanvasinline
model_mid_z() constSlic3r::GUI::DesignCanvas
open_inline_value(double current, std::function< void(double)> commit, std::function< void()> cancel={})Slic3r::GUI::DesignCanvas
patterning() constSlic3r::GUI::DesignCanvas
pending_dimension_type() constSlic3r::GUI::DesignCanvas
pick0_point(Vec2d &out) constSlic3r::GUI::DesignCanvas
rebuild_bodies()Slic3r::GUI::DesignCanvasprivate
redo_last_sketch_entity()Slic3r::GUI::DesignCanvas
refresh_bed()Slic3r::GUI::DesignCanvas
region_entity_indices(const std::vector< SketchEntity > &ents) constSlic3r::GUI::DesignCanvas
region_entity_indices_with_holes(const std::vector< SketchEntity > &ents) constSlic3r::GUI::DesignCanvas
reload()Slic3r::GUI::DesignCanvasprivate
remove_sketch_constraint(int idx)Slic3r::GUI::DesignCanvas
render_hud()Slic3r::GUI::DesignCanvasprivate
repaint_now()Slic3r::GUI::DesignCanvas
request_repaint()Slic3r::GUI::DesignCanvas
request_sketch_exit()Slic3r::GUI::DesignCanvas
reset_canvas_volumes()Slic3r::GUI::DesignCanvas
revolving() constSlic3r::GUI::DesignCanvas
select_body(int body)Slic3r::GUI::DesignCanvas
selected_constrain_axis() constSlic3r::GUI::DesignCanvas
selected_constrain_entities(int &e0, int &e1) constSlic3r::GUI::DesignCanvas
selected_loop_entities() constSlic3r::GUI::DesignCanvas
selected_segment(int &a, int &b) constSlic3r::GUI::DesignCanvas
selected_solid_edges() constSlic3r::GUI::DesignCanvas
selection_box() constSlic3r::GUI::DesignCanvasinline
set_base_pick(std::vector< SketchPlane > planes, std::vector< int > bases, std::vector< std::string > labels={})Slic3r::GUI::DesignCanvas
set_bodies(const std::vector< TriangleMesh > *body_meshes, const std::vector< bool > &visible={})Slic3r::GUI::DesignCanvas
set_body_hidden(bool on)Slic3r::GUI::DesignCanvas
set_body_translucent(bool on)Slic3r::GUI::DesignCanvas
set_constraint_glyphs(std::vector< SketchEntityConstraintDef > cons)Slic3r::GUI::DesignCanvas
set_constraint_highlight(std::vector< int > entities)Slic3r::GUI::DesignCanvas
set_cut_gizmo(const SketchPlane &plane, double offset, const Vec3d &body_center, double half_extent)Slic3r::GUI::DesignCanvas
set_datum_gizmo(const SketchPlane &plane, double usize, double vsize, const Vec3d &base_origin, const Vec3d &base_normal, double offset, bool offset_on)Slic3r::GUI::DesignCanvas
set_datum_planes(std::vector< SketchPlane > planes, std::vector< Vec2d > sizes={})Slic3r::GUI::DesignCanvas
set_display_sketches(std::vector< DesignSketchTool::DisplaySketch > ds)Slic3r::GUI::DesignCanvas
set_draft_gizmo(const Vec3d &face_centroid, const Vec3d &face_normal, double angle)Slic3r::GUI::DesignCanvas
set_escalate_on_repick(bool on)Slic3r::GUI::DesignCanvas
set_extrude_gizmo(const SketchPlane &plane, const Vec2d &centroid, double depth, double depth2, bool two_sided, bool flip)Slic3r::GUI::DesignCanvas
set_helix_gizmo(const SketchPlane &plane, double radius, double pitch, double height, double taper, bool left_handed)Slic3r::GUI::DesignCanvas
set_highlight_faces(const std::vector< std::pair< int, int > > &faces)Slic3r::GUI::DesignCanvas
set_highlight_sketches(std::vector< std::pair< int, ColorRGBA > > hl)Slic3r::GUI::DesignCanvas
set_hole_face_bounds(bool has, double umin, double umax, double vmin, double vmax)Slic3r::GUI::DesignCanvas
set_loop_pick(int feature, int region)Slic3r::GUI::DesignCanvas
set_mate_connectors(std::vector< DesignSketchTool::MateConnectorGlyph > g)Slic3r::GUI::DesignCanvas
set_mate_links(std::vector< std::pair< Vec3d, Vec3d > > l)Slic3r::GUI::DesignCanvas
set_on_body_move_changed(std::function< void(int, const Transform3d &)> cb)Slic3r::GUI::DesignCanvas
set_on_context_menu(std::function< void(const wxPoint &)> cb)Slic3r::GUI::DesignCanvas
set_on_cursor_metrics(std::function< void(double, double, bool)> cb)Slic3r::GUI::DesignCanvas
set_on_cut_offset_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_datum_base_picked(std::function< void(int)> cb)Slic3r::GUI::DesignCanvas
set_on_datum_offset_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_datum_size_changed(std::function< void(double, double)> cb)Slic3r::GUI::DesignCanvas
set_on_dimension_pick_complete(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_display_sketch_activated(std::function< void(int)> cb)Slic3r::GUI::DesignCanvas
set_on_display_sketch_selected(std::function< void(int, int, int)> cb)Slic3r::GUI::DesignCanvas
set_on_draft_angle_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_empty_pick(std::function< void()> cb)Slic3r::GUI::DesignCanvas
set_on_extrude_depth_changed(std::function< void(double, bool)> cb)Slic3r::GUI::DesignCanvas
set_on_fillet_radius_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_helix_changed(std::function< void(double, double, double)> cb)Slic3r::GUI::DesignCanvas
set_on_hole_changed(std::function< void(double, double, double, double)> cb)Slic3r::GUI::DesignCanvas
set_on_imported_transform(std::function< void(int, Vec2d, double, double)> cb)Slic3r::GUI::DesignCanvas
set_on_pattern_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_revolve_angle_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_rib_thickness_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_segment_drawn(std::function< void(double, double)> cb)Slic3r::GUI::DesignCanvas
set_on_shell_thickness_changed(std::function< void(double)> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_commit(std::function< void(const SketchProfile &, const SketchPlane &)> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_constraints_changed(std::function< void()> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_entities_commit(std::function< void(const std::vector< SketchEntity > &, const std::vector< SketchEntityConstraintDef > &, const SketchPlane &)> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_exit(std::function< void()> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_exit_refused(std::function< void()> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_face_selected(std::function< void(int)> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_notice(std::function< void(const std::string &, bool)> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_selection_changed(std::function< void(int)> cb)Slic3r::GUI::DesignCanvas
set_on_sketch_step(std::function< void(DesignSketchTool::Mode, int, int)> cb)Slic3r::GUI::DesignCanvas
set_on_solid_selection_changed(std::function< void(int, int, int, int)> cb)Slic3r::GUI::DesignCanvas
set_on_solve_state(std::function< void(int, bool, bool)> cb)Slic3r::GUI::DesignCanvas
set_on_thread_changed(std::function< void(double, double, double, double)> cb)Slic3r::GUI::DesignCanvas
set_operand_bodies(int target_body, int tool_body)Slic3r::GUI::DesignCanvas
set_preview_mesh(const TriangleMesh &mesh)Slic3r::GUI::DesignCanvas
set_readout(const std::string &text)Slic3r::GUI::DesignCanvasprivate
set_rib_gizmo(const SketchPlane &plane, const Vec2d &p0, const Vec2d &p1, double thickness)Slic3r::GUI::DesignCanvas
set_section_plane(bool on, double z, bool keep_upper=false)Slic3r::GUI::DesignCanvas
set_selected_base(std::function< int()> cb)Slic3r::GUI::DesignCanvas
set_show_bed(bool b)Slic3r::GUI::DesignCanvas
set_sidebar_collapse(std::function< CollapseSide()> side, std::function< void()> toggle)Slic3r::GUI::DesignCanvas
set_sidebar_collapse_tooltip(const std::string &tooltip)Slic3r::GUI::DesignCanvas
set_sketch_construction(bool c)Slic3r::GUI::DesignCanvas
set_sketch_dimension_value(double v)Slic3r::GUI::DesignCanvas
set_sketch_polygon_circumscribed(bool c)Slic3r::GUI::DesignCanvas
set_sketch_polygon_sides(int n)Slic3r::GUI::DesignCanvas
set_sketch_tool(DesignSketchTool::Mode mode)Slic3r::GUI::DesignCanvas
set_solid_pick(const std::vector< CadBody > *bodies, const TriangleMesh *mesh, const std::vector< int > *tri_face, const std::vector< int > *tri_body, const std::vector< bool > *visible=nullptr, const std::vector< Transform3d > *xform=nullptr)Slic3r::GUI::DesignCanvas
set_status_text(const wxString &text, const wxColour &colour)Slic3r::GUI::DesignCanvas
set_view(const std::string &view_name)Slic3r::GUI::DesignCanvas
set_xray_focus(int body)Slic3r::GUI::DesignCanvas
shelling() constSlic3r::GUI::DesignCanvas
sketch_abort_gesture()Slic3r::GUI::DesignCanvas
sketch_confirm_pending()Slic3r::GUI::DesignCanvas
sketch_constraint_count() constSlic3r::GUI::DesignCanvas
sketch_constraints() constSlic3r::GUI::DesignCanvas
sketch_dimension_current() constSlic3r::GUI::DesignCanvas
sketch_dimension_kind() constSlic3r::GUI::DesignCanvas
sketch_disarm_tool()Slic3r::GUI::DesignCanvas
sketch_entities() constSlic3r::GUI::DesignCanvas
sketch_first_selected_type(SketchEntity::Type &out) constSlic3r::GUI::DesignCanvas
sketch_is_selecting() constSlic3r::GUI::DesignCanvasinline
sketch_selection() constSlic3r::GUI::DesignCanvas
sketch_selection_count() constSlic3r::GUI::DesignCanvas
swap_camera()Slic3r::GUI::DesignCanvasprivate
sync_selected_faces()Slic3r::GUI::DesignCanvasprivate
threading() constSlic3r::GUI::DesignCanvas
toggle_axes()Slic3r::GUI::DesignCanvas
toggle_planes()Slic3r::GUI::DesignCanvas
toggle_sketch_construction_selection()Slic3r::GUI::DesignCanvas
try_add_sketch_constraints(const std::vector< SketchEntityConstraintDef > &defs)Slic3r::GUI::DesignCanvas
unbind_canvas_event_handlers()Slic3r::GUI::DesignCanvas
undo_last_sketch_entity()Slic3r::GUI::DesignCanvas
update_constrain_entities(const std::vector< SketchEntity > &ents)Slic3r::GUI::DesignCanvas
update_constrain_profile(const std::vector< Vec2d > &pts)Slic3r::GUI::DesignCanvas
view_normal_to_sketch()Slic3r::GUI::DesignCanvas
zoom_to_box(BoundingBoxf3 box)Slic3r::GUI::DesignCanvas
~DesignCanvas() overrideSlic3r::GUI::DesignCanvas