OrcaSlicer latest
OrcaSlicer
Loading...
Searching...
No Matches
Slic3r::BeltGCode Member List

This is the complete list of members for Slic3r::BeltGCode, including all inherited members.

_do_export(Print &print, GCodeOutputStream &file, ThumbnailsGeneratorCallback thumbnail_cb)Slic3r::GCodeprotected
_encode_label_ids_to_base64(std::vector< size_t > ids)Slic3r::GCodeprotected
_extrude(const ExtrusionPath &path, const std::string &path_description="", double speed=-1)Slic3r::GCodeprotected
_needSAFC(const ExtrusionPath &path)Slic3r::GCodeprotected
_print_first_layer_bed_temperature(GCodeOutputStream &file, Print &print, const std::string &gcode, unsigned int first_printing_extruder_id, bool wait)Slic3r::GCodeprotected
_print_first_layer_extruder_temperatures(GCodeOutputStream &file, Print &print, const std::string &gcode, unsigned int first_printing_extruder_id, bool wait)Slic3r::GCodeprotected
append_full_config(const Print &print, std::string &str)Slic3r::GCodestatic
apply_print_config(const PrintConfig &print_config)Slic3r::GCode
assign_object_label_ids(Print &print)Slic3r::GCode
belt_height_above_floor(const Vec3d &point_slicing_mm, double &height_mm) constSlic3r::GCodeprotected
belt_layer_past_first_layer_band(const Layer *object_layer) constSlic3r::GCodeprotected
calc_max_volumetric_speed(const double layer_height, const double line_width, const std::string co_str)Slic3r::GCodeprotected
capture_toolchange_position()Slic3r::GCodeprotected
change_layer(coordf_t print_z)Slic3r::GCodeprotected
check_placeholder_parser_failed()Slic3r::GCodeprotected
collect_layers_to_print(const PrintObject &object, bool skip_empty_first_layer=false)Slic3r::GCodeprotectedstatic
collect_layers_to_print(const Print &print)Slic3r::GCodeprotectedstatic
compute_farthest_point(const std::vector< LayerToPrint > &layers, int most_used_extruder, const std::map< std::pair< const SupportLayer *, ExtrusionRole >, unsigned int > &support_filaments)Slic3r::GCodeprotected
config() constSlic3r::GCodeinline
cur_extruder_index() constSlic3r::GCodeprotected
do_export(Print *print, const char *path, GCodeProcessorResult *result=nullptr, ThumbnailsGeneratorCallback thumbnail_cb=nullptr)Slic3r::GCode
effective_layer_index_for_point(const Vec3d &point_slicing_mm) constSlic3r::GCodeinlineprotected
emit_belt_brim_bands(const Print &print, const std::vector< LayerToPrint > &layers, const size_t single_object_instance_idx, const unsigned int extruder_id)Slic3r::GCodeprotected
enable_cooling_markers() constSlic3r::GCodeinline
export_layer_filaments(GCodeProcessorResult *result)Slic3r::GCode
extrude_entity(const ExtrusionEntity &entity, const std::string &description="", double speed=-1., const std::vector< const ExtrusionEntity * > &region_perimeters={}, const WipeInwardSupport *wipe_support=nullptr)Slic3r::GCodeprotected
extrude_infill(const Print &print, const std::vector< ObjectByExtruder::Island::Region > &by_region, bool ironing)Slic3r::GCodeprotected
extrude_loop(const ExtrusionLoop &loop, const std::string &description, double speed=-1., const std::vector< const ExtrusionEntity * > &region_perimeters={}, const Point *start_point=nullptr, const WipeInwardSupport *wipe_support=nullptr)Slic3r::GCodeprotected
extrude_multi_path(const ExtrusionMultiPath &multipath, const std::string &description="", double speed=-1.)Slic3r::GCodeprotected
extrude_path(const ExtrusionPath &path, const std::string &description="", double speed=-1.)Slic3r::GCodeprotected
extrude_perimeters(const Print &print, const std::vector< ObjectByExtruder::Island::Region > &by_region, bool is_first_layer, bool is_infill_first, bool unsupported_loops_only=false)Slic3r::GCodeprotected
extrude_support(const ExtrusionEntityCollection &support_fills, const ExtrusionRole support_extrusion_role)Slic3r::GCodeprotected
extrusion_role_to_string_for_parser(const ExtrusionRole &)Slic3r::GCode
first_layer_band_mm() constSlic3r::GCodeinlineprotected
GCode()Slic3r::GCodeinline
gcode_to_point(const Vec2d &point) constSlic3r::GCode
generate_object_brim(const Print &print, const PrintObject &object, size_t instance_id, bool first_layer, unsigned int extruder_id, const Layer *object_layer)Slic3r::GCodeprotected
generate_object_skirt_group(const Print &print, const PrintObject &object, size_t instance_id, const LayerTools &layer_tools, const Layer &layer, unsigned int extruder_id)Slic3r::GCodeprotected
generate_skirt(const Print &print, const ExtrusionEntityCollection &skirt, const Point &offset, const float skirt_start_angle, const LayerTools &layer_tools, const Layer &layer, unsigned int extruder_id, std::vector< coordf_t > &skirt_done)Slic3r::GCodeprotected
generate_timelapse_gcode(const Print &print, coordf_t print_z, int most_used_extruder, const std::set< size_t > *layer_object_label_ids, const std::vector< const PrintObject * > *printed_objects, bool skip_pos_pick=false)Slic3r::GCodeprotected
get_bed_temperature(const int extruder_id, const bool is_first_layer, const BedType bed_type) constSlic3r::GCodeprotected
get_extruder_id(unsigned int filament_id) constSlic3r::GCodeprotected
get_filament_config_index(int filament_id) constSlic3r::GCode
get_filament_config_index(int filament_id, size_t layer_id) constSlic3r::GCode
get_highest_bed_temperature(const bool is_first_layer, const Print &print) constSlic3r::GCodeprotected
get_nozzle_config_index(int filament_id) constSlic3r::GCode
init_belt_writer(Print &print) overrideSlic3r::BeltGCodeprotectedvirtual
instance_name(const PrintInstance &instance)Slic3r::GCodeprotected
interpolate_value_across_layers(float start_value, float end_value, float step=0.0f) constSlic3r::GCode
is_BBL_Printer()Slic3r::GCode
last_pos() constSlic3r::GCodeinline
last_pos_defined() constSlic3r::GCodeinlineprotected
layer() constSlic3r::GCodeinline
layer_count() constSlic3r::GCodeinline
layer_id() constSlic3r::GCodeinlineprotected
m_avoid_crossing_perimetersSlic3r::GCodeprotected
m_belt_brim_zSlic3r::GCodeprotected
m_belt_floor_objectSlic3r::GCodeprotected
m_belt_in_bandSlic3r::GCodeprotected
m_brim_doneSlic3r::GCodeprotected
m_calib_configSlic3r::GCodeprotected
m_configSlic3r::GCodeprotected
m_cooling_bufferSlic3r::GCodeprotected
m_cur_layer_idxSlic3r::GCodeprotected
m_curr_printSlic3r::GCodeprotected
m_enable_cooling_markersSlic3r::GCodeprotected
m_enable_exclude_objectSlic3r::GCodeprotected
m_enable_extrusion_role_markersSlic3r::GCodeprotected
m_enable_loop_clippingSlic3r::GCodeprotected
m_exclusion_volume_travel_avoidanceSlic3r::GCodeprotected
m_extrusion_quality_estimatorSlic3r::GCodeprotected
m_fan_moverSlic3r::GCodeprotected
m_farthest_point_timelapseSlic3r::GCodeprotected
m_filament_index_cacheSlic3r::GCodemutableprotected
m_filament_instances_codeSlic3r::GCodeprotected
m_imex_head_filament_mapSlic3r::GCodeprotected
m_imex_parallel_modeSlic3r::GCodeprotected
m_initial_layer_extrudersSlic3r::GCodeprotected
m_instance_namesSlic3r::GCodeprotected
m_is_role_based_fan_onSlic3r::GCodeprotected
m_label_objects_idsSlic3r::GCodeprotected
m_last_extrusion_roleSlic3r::GCodeprotected
m_last_heightSlic3r::GCodeprotected
m_last_layer_accumulated_massSlic3r::GCodeprotected
m_last_layer_zSlic3r::GCodeprotected
m_last_mm3_mmSlic3r::GCodeprotected
m_last_notgapfill_extrusion_roleSlic3r::GCodeprotected
m_last_obj_copySlic3r::GCodeprotected
m_last_posSlic3r::GCodeprotected
m_last_pos_definedSlic3r::GCodeprotected
m_last_processor_extrusion_roleSlic3r::GCodeprotected
m_last_widthSlic3r::GCodeprotected
m_layerSlic3r::GCodeprotected
m_layer_countSlic3r::GCodeprotected
m_layer_indexSlic3r::GCodeprotected
m_max_layer_zSlic3r::GCodeprotected
m_multi_flow_segment_path_average_mm3_per_mmSlic3r::GCodeprotected
m_multi_flow_segment_path_pa_setSlic3r::GCodeprotected
m_need_change_layer_lift_zSlic3r::GCodeprotected
m_nominal_zSlic3r::GCodeprotected
m_nozzle_index_cacheSlic3r::GCodemutableprotected
m_object_layer_over_raftSlic3r::GCodeprotected
m_objsWithBrimSlic3r::GCodeprotected
m_ooze_preventionSlic3r::GCodeprotected
m_ordering_cacheSlic3r::GCodeprotected
m_originSlic3r::GCodeprotected
m_pa_processorSlic3r::GCodeprotected
m_pending_start_gcode_positionSlic3r::GCodeprotected
m_placeholder_parser_integrationSlic3r::GCodeprotected
m_pressure_equalizerSlic3r::GCodeprotected
m_printSlic3r::GCodeprotected
m_printed_objectsSlic3r::GCodeprotected
m_processorSlic3r::GCodeprotected
m_resonance_avoidanceSlic3r::GCodeprotected
m_retract_when_crossing_perimetersSlic3r::GCodeprotected
m_role_based_fan_marker_layerSlic3r::GCodeprotected
m_scaled_resolutionSlic3r::GCodeprotected
m_seam_placerSlic3r::GCodeprotected
m_second_layer_things_doneSlic3r::GCodeprotected
m_skirt_group_doneSlic3r::GCodeprotected
m_small_area_infill_flow_compensatorSlic3r::GCodeprotected
m_sorted_layer_filamentsSlic3r::GCodeprotected
m_spiral_vaseSlic3r::GCodeprotected
m_start_gcode_filamentSlic3r::GCodeprotected
m_sub_layer_flow_ratioSlic3r::GCodeprotected
m_sub_layer_heightSlic3r::GCodeprotected
m_support_traditional_timelapseSlic3r::GCodeprotected
m_timelapse_pos_pickerSlic3r::GCodeprotected
m_timelapse_uses_clear_to_x0Slic3r::GCodeprotected
m_timelapse_uses_posSlic3r::GCodeprotected
m_timelapse_warning_codeSlic3r::GCodeprotected
m_toolchange_countSlic3r::GCodeprotected
m_wipeSlic3r::GCodeprotected
m_wipe_towerSlic3r::GCodeprotected
m_writerSlic3r::GCodeprotected
mass_load_limited_machine_acceleration(const PrintStatistics &curr_print_statistics, const Print &print, double &y_acceleration_limit_res, double &accumulated_mass_res)Slic3r::GCodeprotected
needs_retraction(const Polyline &travel, ExtrusionRole role, LiftType &lift_type)Slic3r::GCode
object_layer_over_raft() constSlic3r::GCodeinlineprotected
on_first_layer() constSlic3r::GCodeinlineprotected
on_first_layer(const Vec3d &point_slicing_mm) constSlic3r::GCodeinlineprotected
on_set_origin(const PrintObject *obj, const Point &inst_shift) overrideSlic3r::BeltGCodeprotectedvirtual
origin() constSlic3r::GCodeinline
placeholder_parser()Slic3r::GCodeinline
placeholder_parser() constSlic3r::GCodeinline
placeholder_parser_process(const std::string &name, const std::string &templ, unsigned int current_filament_id, const DynamicConfig *config_override=nullptr)Slic3r::GCode
point_to_gcode(const Point &point) constSlic3r::GCode
point_to_gcode(const Point3 &point) constSlic3r::GCode
point_to_gcode_quantized(const Point &point) constSlic3r::GCode
point_to_gcode_quantized(const Point3 &point) constSlic3r::GCode
preamble()Slic3r::GCodeprotected
print_machine_envelope(GCodeOutputStream &file, Print &print)Slic3r::GCodeprotected
process_belt_brim_layer(const Print &print, const std::vector< LayerToPrint > &layers, const LayerTools &layer_tools, const bool last_layer, const size_t single_object_instance_idx, const int most_used_extruder)Slic3r::GCodeprotected
process_layer(const Print &print, const std::vector< LayerToPrint > &layers, const LayerTools &layer_tools, const bool last_layer, const std::vector< const PrintInstance * > *ordering, const int most_used_extruder, const size_t single_object_idx=size_t(-1), const bool prime_extruder=false)Slic3r::GCodeprotected
process_layer_change_gcode(const Print &print, coordf_t print_z, int most_used_extruder, bool has_wipe_tower)Slic3r::GCodeprotected
process_layers(const Print &print, const ToolOrdering &tool_ordering, const std::vector< const PrintInstance * > &print_object_instances_ordering, const std::vector< std::pair< coordf_t, std::vector< LayerToPrint > > > &layers_to_print, GCodeOutputStream &output_stream)Slic3r::GCodeprotected
process_layers(const Print &print, const ToolOrdering &tool_ordering, std::vector< LayerToPrint > layers_to_print, const size_t single_object_idx, GCodeOutputStream &output_stream, const bool prime_extruder=false)Slic3r::GCodeprotected
retract(bool toolchange=false, bool is_last_retraction=false, LiftType lift_type=LiftType::NormalLift, bool apply_instantly=false, ExtrusionRole role=erNone)Slic3r::GCode
set_extruder(unsigned int extruder_id, double print_z, bool by_object=false, int toolchange_temp_override=-1, bool defer_temp_wait=false)Slic3r::GCode
set_extruders(const std::vector< unsigned int > &extruder_ids)Slic3r::GCodeprotected
set_filament_pressure_advance(unsigned int filament_id, int tool=-1)Slic3r::GCode
set_gcode_offset(double x, double y)Slic3r::GCodeinline
set_gcode_offset_with_imex_shift(double x, double y, double imex_x, double imex_y)Slic3r::GCodeinline
set_last_pos(const Point &pos)Slic3r::GCodeinlineprotected
set_last_pos(const Point3 &pos)Slic3r::GCodeinlineprotected
set_layer_count(unsigned int value)Slic3r::GCodeinline
set_object_info(Print *print)Slic3r::GCode
set_origin(const Vec2d &pointf)Slic3r::GCode
set_origin(const coordf_t x, const coordf_t y)Slic3r::GCodeinline
should_disable_arc_fitting() constSlic3r::GCodeinlineprotectedvirtual
sort_print_object_instances(std::vector< ObjectByExtruder > &objects_by_extruder, const std::vector< LayerToPrint > &layers, const std::vector< const PrintInstance * > *ordering, const size_t single_object_instance_idx)Slic3r::GCodeprotected
synchronize_toolchange_position(const ToolchangePositionState &before, const std::string &emitted_gcode)Slic3r::GCodeprotected
timelapse_gcode_config(const Print &print, coordf_t print_z, int most_used_extruder, const std::vector< const PrintObject * > *printed_objects, bool skip_pos_pick)Slic3r::GCodeprotected
to_lift_type(ZHopType z_hop_types)Slic3r::GCodeprotected
travel_to(const Point &point, ExtrusionRole role, std::string comment, double z=DBL_MAX)Slic3r::GCode
unretract(float extra_retract=0.f)Slic3r::GCodeinline
update_layer_related_config(int layer_id)Slic3r::GCodeprotected
update_placeholder_parser_with_variant_params()Slic3r::GCodeprotected
wipe_tower_type()Slic3r::GCode
write_belt_header(GCodeOutputStream &file, const Print &print) overrideSlic3r::BeltGCodeprotectedvirtual
writer()Slic3r::GCodeinline
writer() constSlic3r::GCodeinline
~GCode()=defaultSlic3r::GCodevirtual